Feat/add sen5x (#7245)

* Move PMSA003I to separate class and update AQ telemetry

* AirQualityTelemetry module not depend on PM sensor presence

* Remove commented line

* Fixes on PMS class

* Add missing warmup period to wakeUp function

* Fixes on compilation for different variants

* Add functions to check for I2C bus speed and set it

* Add ScreenFonts.h

Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>

* PMSA003I 1st round test

* Fix I2C scan speed

* Fix minor issues and bring back I2C SPEED def

* Remove PMSA003I library as its no longer needed

* Remove unused I2C speed functions and cleanup

* Cleanup of SEN5X specific code added from switching branches
* Remove SCAN_I2C_CLOCK_SPEED block as its not needed
* Remove associated functions for setting I2C speed

* Unify build epoch to add flag in platformio-custom.py (#7917)

* Unify build_epoch replacement logic in platformio-custom

* Missed one

* Fix build error in rak_wismesh_tap_v2 (#7905)

In the logs was:
"No screen resolution defined in build_flags. Please define DISPLAY_SIZE."

set according to similar devices.

* Put guards in place around debug heap operations (#7955)

* Put guards in place around debug heap operations

* Add macros to clean up code

* Add pointer as well

* Cleanup

* Fix memory leak in NextHopRouter: always free packet copy when removing from pending

* Formatting

* Only queue 2 client notification

* Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak

Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap

* Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak

Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap

* Update protobufs (#7973)

Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>

* T-Lora Pager: Support LR1121 and SX1280 models (#7956)

* T-Lora Pager: Support LR1121 and SX1280 models

* Remove ifdefs

* Trunk

* Trunk

* Static memory pool allocation (#7966)

* Static memory pool

* Initializer

* T-Lora Pager: Support LR1121 and SX1280 models (#7956)

* T-Lora Pager: Support LR1121 and SX1280 models

* Remove ifdefs

---------

Co-authored-by: WillyJL <me@willyjl.dev>

* Portduino dynamic alloc

* Missed

* Drop the limit

* Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977)

Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

* Fix json report crashes on esp32 (#7978)

* Tweak maximums

* Fix DRAM overflow on old esp32 targets

* Guard bad time warning logs using GPS_DEBUG (#7897)

In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy.

In combination, these result in a spamming of the logs when a bad time is found

When the GPS is active, we're calling the GPS thread every 0.2secs.

So this log could be printed 4,500 times in a no-lock scenario :)

Reserve this experience for developers using GPS_DEBUG.

Fixes https://github.com/meshtastic/firmware/issues/7896

* Scale probe buffer size based on current baud rate (#7975)

* Scale probe buffer size based on current baud rate

* Throttle bad time validation logging and fix time comparison logic

* Remove comment

* Missed the other instances

* Copy pasta

* Fix GPS gm_mktime memory leak (#7981)

* Fix overflow of time value (#7984)

* Fix overflow of time value

* Revert "Fix overflow of time value"

This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214.

* That got boogered up

* Remove PMSA003 include from modules

* Add flag to exclude air quality module

* Rework PMSA003I to align with new I2C scanner

* Reworks AQ telemetry to match new dynamic allocation method
* Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements
* Reworks PMSA003I

* Move add sensor template to separate file

* Split telemetry on screen options

* Add variable I2C clock compile flag

* Added to Seeed Xiao S3 as demo

* Fix drawFrame in AQ module

* Module settings override to i2cScan module function

* Move to CAN_RECLOCK_I2C per architecture

* Add reclock function in TelemetrySensor.cpp
* Add flag in ESP32 common

* Minor fix

* Move I2C reclock function to src/detect

* Fix uninitMemberVar errors and compile issue

* Make sleep, wakeUp functions generic

* Fix STM32 builds

* Add exclude AQ sensor to builds that have environmental sensor excludes
* Add includes to AddI2CSensorTemplate.h

* SEN5X first pass

* WIP Sen5X functions

* Further (non-working) progress in SEN5X

* WIP Sen5X functions

* Changes on SEN5X library - removing pm_env as well

* Small cleanup of SEN5X sensors

* Minor change for SEN5X detection

* Remove dup code

* Enable PM sensor before sending telemetry.

This enables the PM sensor for a predefined period to allow for warmup.

Once telemetry is sent, the sensor shuts down again.

* Small cleanups in SEN5X sensor

* Add dynamic measurement interval for SEN5X

* Only disable SEN5X if enough time after reading.

* Idle for SEN5X on communication error

* Cleanup of logs and remove unnecessary delays

* Small TODO

* Settle on uint16_t for SEN5X PM data

* Make AQTelemetry sensors non-exclusive

* Implementation of cleaning in FS prefs and cleanup

* Remove unnecessary LOGS
* Add cleaning date storage in FS
* Report non-cumulative PN

* Bring back detection code for SEN5X after branch rebase

* Add placeholder for admin message

* Add VOC measurements and persistence (WIP)

* Adds VOC measurements and state
* Still not working on VOC Index persistence
* Should it stay in continuous mode?

* Add one-shot mode config flag to SEN5X

* Add nan checks on sensor data from SEN5X

* Working implementation on VOCState

* Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h)
* Adds conditions for stability and sensor state

* Fixes on VOC state and mode swtiching

* Adds a new RHT/Gas only mode, with 3600s stabilization time
* Fixes the VOCState buffer mismatch
* Fixes SEN50/54/55 model mistake

* Adapt SEN5X to new sensor list structure. Improve reclock.

* Improve reClockI2C conditions for different variants
* Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery
* Add SEN5X

* Fix merge errors

* Update library dependencies in platformio.ini

* Fix unitialized variables in SEN5X constructor

* Fix missing import

* Cleanup of SEN5X class

* Exclude AQ sensor from wio-e5 due to flash limitations

* Fix I2C clock change logic

* Fix trunk

* Fix on condition in reclock

* Add check on polling interval of sen5x

---------

Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de>
Co-authored-by: Nashui-Yan <yannashui10@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
Co-authored-by: WillyJL <me@willyjl.dev>
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>

src/detect/reClockI2C.cpp

@@ -0,0 +1,31 @@
+#include "reClockI2C.h"
+#include "ScanI2CTwoWire.h"
+
+uint32_t reClockI2C(uint32_t desiredClock, TwoWire *i2cBus, bool force)
+{
+
+    uint32_t currentClock = 0;
+
+    /* See https://github.com/arduino/Arduino/issues/11457
+      Currently, only ESP32 can getClock()
+      While all cores can setClock()
+      https://github.com/sandeepmistry/arduino-nRF5/blob/master/libraries/Wire/Wire.h#L50
+      https://github.com/earlephilhower/arduino-pico/blob/master/libraries/Wire/src/Wire.h#L60
+      https://github.com/stm32duino/Arduino_Core_STM32/blob/main/libraries/Wire/src/Wire.h#L103
+      For cases when I2C speed is different to the ones defined by sensors (see defines in sensor classes)
+      we need to reclock I2C and set it back to the previous desired speed.
+      Only for cases where we can know OR predefine the speed, we can do this.
+    */
+
+// TODO add getClock function or return a predefined clock speed per variant?
+#ifdef CAN_RECLOCK_I2C
+    currentClock = i2cBus->getClock();
+#endif
+
+    if ((currentClock != desiredClock) || force) {
+        LOG_DEBUG("Changing I2C clock to %u", desiredClock);
+        i2cBus->setClock(desiredClock);
+    }
+
+    return currentClock;
+}