Add EByte EoRa-Hub (#9169)

2026-01-15 06:24:10 -06:00
parent 360579926c
commit 7e4e772113
5 changed files with 143 additions and 0 deletions
@@ -0,0 +1,19 @@
+#include "RadioLib.h"
+
+// This is rewritten to match the requirements of the E80-900M2213S
+// The E80 does not conform to the reference Semtech switches(!) and therefore needs a custom matrix.
+// See footnote #3 in "https://www.cdebyte.com/products/E80-900M2213S/2#Pin"
+// RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
+// DIO5 -> RFSW0_V1
+// DIO6 -> RFSW1_V2
+// DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC, RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode             DIO5  DIO6  DIO7
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW}},  {LR11x0::MODE_RX, {LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX, {HIGH, HIGH, LOW}},  {LR11x0::MODE_TX_HP, {HIGH, LOW, LOW}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
+    {LR11x0::MODE_WIFI, {LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+};