Plain RAK4631 should not compile EInk and TFT display code (#8811)

* Plain RAK4631 should not compile EInk and TFT display code

* Add USE_TFTDISPLAY to variant files.

* Derp

* Undo the platformio.ini changes to heltec_v4

* Drop unneeded src_filter lines

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>

variants/esp32/chatter2/variant.h

@@ -67,6 +67,7 @@
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
 #define TFT_BACKLIGHT_ON LOW
+#define USE_TFTDISPLAY 1
 
 // Battery
 

variants/esp32/m5stack_core/platformio.ini

@@ -7,7 +7,6 @@ build_src_filter =
 build_flags = 
   ${esp32_base.build_flags}
   -I variants/esp32/m5stack_core
-  -DILI9341_DRIVER
   -DM5STACK
   -DUSER_SETUP_LOADED
   -DTFT_SDA_READ

variants/esp32/m5stack_core/variant.h

@@ -34,11 +34,13 @@
 #define GPS_RX_PIN 16
 #define GPS_TX_PIN 17
 
+#define ILI9341_DRIVER
 #define TFT_HEIGHT 240
 #define TFT_WIDTH 320
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_BUSY -1
+#define USE_TFTDISPLAY 1
 
 // LCD screens are slow, so slowdown the wipe so it looks better
 #define SCREEN_TRANSITION_FRAMERATE 1 // fps

variants/esp32/wiphone/variant.h

@@ -34,6 +34,7 @@
 #define ST7789_SCK 18
 #define ST7789_CS 5
 #define ST7789_RS 26
+#define USE_TFTDISPLAY 1
 // I don't have a 'wiphone' but this I think should not be defined this way (don't set TFT_BL if we don't have a hw way to control
 // it)
 // #define ST7789_BL -1 // EXTENDER_PIN(9)

variants/esp32s3/hackaday-communicator/variant.h

@@ -10,6 +10,7 @@
 #define HAS_SCREEN 1
 #define TFT_BLACK 0
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
 
 #define USE_POWERSAVE
 #define SLEEP_TIME 120

variants/esp32s3/heltec_v4/variant.h

@@ -34,6 +34,9 @@
 #define LORA_PA_EN 2
 #define LORA_PA_TX_EN 46 // enable tx
 
+#if HAS_TFT
+#define USE_TFTDISPLAY 1
+#endif
 /*
  * GPS pins
  */

variants/esp32s3/heltec_wireless_tracker/variant.h

@@ -27,6 +27,7 @@
 #define TFT_OFFSET_Y -1
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1
 
 // pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
 // GPS UC6580:          GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR

variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h

@@ -28,6 +28,7 @@
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
 #define FORCE_LOW_RES 1
+#define USE_TFTDISPLAY 1
 
 #define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
 #define VEXT_ON_VALUE LOW

variants/esp32s3/heltec_wireless_tracker_v2/variant.h

@@ -27,6 +27,7 @@
 #define TFT_INVERT false
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1
 
 #define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
 #define VEXT_ON_VALUE HIGH

variants/esp32s3/picomputer-s3/variant.h

@@ -32,6 +32,7 @@
 #define ST7789_CS 6
 #define ST7789_RS 1
 #define ST7789_BL 5
+#define USE_TFTDISPLAY 1
 
 #define ST7789_RESET -1
 #define ST7789_MISO -1

variants/esp32s3/seeed-sensecap-indicator/variant.h

@@ -37,6 +37,7 @@
 #define TFT_BL 45
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1
 
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT (6 | IO_EXPANDER)

variants/esp32s3/t-deck/variant.h

@@ -22,6 +22,7 @@
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
 
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16

variants/esp32s3/t-watch-s3/variant.h

@@ -18,6 +18,7 @@
 #define TFT_OFFSET_ROTATION 2
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1
 
 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16

variants/esp32s3/tlora-pager/variant.h

@@ -20,6 +20,7 @@
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
 
 #define I2C_SDA SDA
 #define I2C_SCL SCL

variants/esp32s3/tracksenger/internal/variant.h

@@ -28,6 +28,7 @@
 #define TFT_OFFSET_Y -1
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1
 
 #define VEXT_ENABLE 3 // active HIGH, powers the lora antenna boost
 #define VEXT_ON_VALUE HIGH

variants/esp32s3/tracksenger/lcd/variant.h

@@ -16,6 +16,7 @@
 #define ST7789_CS 38
 #define ST7789_RS 40
 #define ST7789_BL 21
+#define USE_TFTDISPLAY 1
 // P#define TFT_BL 21 /* V1.1 PCB marking */
 
 #define ST7789_RESET -1

variants/esp32s3/unphone/variant.h

@@ -36,6 +36,7 @@
 #define TFT_INVERT false
 #define SCREEN_ROTATE true
 #define SCREEN_TRANSITION_FRAMERATE 5
+#define USE_TFTDISPLAY 1
 
 #define HAS_TOUCHSCREEN 1
 #define USE_XPT2046 1

variants/native/portduino-buildroot/variant.h

@@ -1,4 +1,5 @@
 #define HAS_SCREEN 1
+#define USE_TFTDISPLAY 1
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE portduino_config.maxtophone

variants/native/portduino/variant.h

@@ -1,6 +1,7 @@
 #ifndef HAS_SCREEN
 #define HAS_SCREEN 1
 #endif
+#define USE_TFTDISPLAY 1
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE portduino_config.maxtophone

variants/nrf52840/rak4631/platformio.ini

@@ -8,9 +8,7 @@ build_type = release
 build_flags = ${nrf52840_base.build_flags}
   -I variants/nrf52840/rak4631
   -D RAK_4631
-  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
-  -DEINK_WIDTH=250
-  -DEINK_HEIGHT=122 
+  -DMESHTASTIC_USE_EINK_UI=0
   -DRADIOLIB_EXCLUDE_SX128X=1
   -DRADIOLIB_EXCLUDE_SX127X=1
   -DRADIOLIB_EXCLUDE_LR11X0=1
@@ -30,7 +28,10 @@ build_src_filter = ${nrf52_base.build_src_filter} \
   +<../variants/nrf52840/rak4631> \
   +<mesh/eth/> \
   +<mesh/api/> \
-  +<mqtt/>
+  +<mqtt/> \
+  -<graphics/EInkDisplay2.cpp> \
+  -<graphics/EInkDynamicDisplay.cpp> \
+  -<graphics/fonts/EinkDisplayFonts.cpp>
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${nrf52_networking_base.lib_deps}

variants/nrf52840/rak_wismeshtap/variant.h

@@ -300,6 +300,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SPI_FREQUENCY 50000000
 #define TFT_SPI_PORT SPI1
 #define ST7789_CS WB_SPI_CS // Adds compatibility with the rest of the checking for a ST7789 TFT.
+#define USE_TFTDISPLAY 1
 
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5