Add support for the rak10701 board, no touch (#2933)

* Add support for the rak10701 board, no touch

* Moved tftblack fillin and changed teh src flags

* Added rak10701 to platformio.ini

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

variants/rak10701/platformio.ini

@@ -0,0 +1,18 @@
+; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
+[env:rak10701]
+extends = nrf52840_base
+board = wiscore_rak4631
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak10701 -D RAK_4631
+  -L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m4/fpv4-sp-d16-hard"
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak10701> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  ${networking_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  bodmer/TFT_eSPI
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+;upload_protocol = jlink