ThinkNode M7 (#8077)

* ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * ThinkNode G3, ETH support WIP * rename variant and add guard macros * older G3 operational. M7 next. * Split out G3 and M7 to different variants. Completely new PCB design. The G3 stays on 'PRIVATE_HW' * Define button behaviour and use all of the device flash --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
2026-05-11 11:33:13 -05:00
parent a23f923e64
commit 8e99ffbe7e
25 changed files with 340 additions and 22 deletions
@@ -0,0 +1,26 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 39;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 41;
+static const uint8_t SCK = 42;
+
+// #define SPI_MOSI (11)
+// #define SPI_SCK (10)
+// #define SPI_MISO (9)
+// #define SPI_CS (12)
+
+// #define SDCARD_CS SPI_CS
+
+#endif /* Pins_Arduino_h */
@@ -0,0 +1,20 @@
+[env:thinknode_g3]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+board_build.psram_type = opi
+
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D HAS_UDP_MULTICAST=1
+  -D BOARD_HAS_PSRAM
+  -D PRIVATE_HW
+  -I variants/esp32s3/ELECROW-ThinkNode-G3
+  -mfix-esp32-psram-cache-issue
+
+lib_ignore =
+    Ethernet
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=github-tags depName=ESP32-CH390 packageName=meshtastic/ESP32-CH390
+  https://github.com/meshtastic/ESP32-CH390/archive/refs/tags/v1.0.1.zip
@@ -0,0 +1,36 @@
+#define HAS_GPS 0
+#define HAS_WIRE 0
+#define I2C_NO_RESCAN
+
+#define WIFI_LED 5
+#define WIFI_STATE_ON 0
+
+#define LED_PIN 6
+#define LED_STATE_ON 0
+#define BUTTON_PIN 4
+
+#define LORA_SCK 42
+#define LORA_MISO 41
+#define LORA_MOSI 40
+#define LORA_CS 39
+#define LORA_RESET 21
+
+#define USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 15
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define PIN_POWER_EN 45
+
+#define HAS_ETHERNET 1
+#define USE_CH390D 1
+
+#define ETH_MISO_PIN 12
+#define ETH_MOSI_PIN 11
+#define ETH_SCLK_PIN 13
+#define ETH_CS_PIN 14
+#define ETH_INT_PIN 10
+#define ETH_RST_PIN 9
+// #define ETH_ADDR 1