Fix #ifndef and rename the variant

variants/rak4631_eth_gw/platformio.ini

@@ -1,21 +1,29 @@
 ; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
-[env:rak4631_mqtt_json]
+[env:rak4631_eth_gw]
 extends = nrf52840_base
 board = wiscore_rak4631
 board_check = true
-build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_mqtt_json -D RAK_4631
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_eth_gw -D RAK_4631
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
   -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
   -DNRF52_USE_JSON=1
-;   -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_GPS=1
   -DMESHTASTIC_EXCLUDE_WIFI=1
 ;   -DMESHTASTIC_EXCLUDE_SCREEN=1
-  -DMESHTASTIC_EXCLUDE_PKI=1
+;   -DMESHTASTIC_EXCLUDE_PKI=1
   -DMESHTASTIC_EXCLUDE_POWER_FSM=1
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_mqtt_json> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  -DMESHTASTIC_EXCLUDE_TZ=1
+  -DMESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1
+  -DMESHTASTIC_EXCLUDE_STOREFORWARD=1
+  -DMESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -DMESHTASTIC_EXCLUDE_WAYPOINT=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_eth_gw> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}
@@ -31,7 +39,7 @@ lib_deps =
 ; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
 ; programming time is about the same as the bootloader version.
 ; For information on this see the meshtastic developers documentation for "Development on the NRF52"
-[env:rak4631_mqtt_json_dbg]
+[env:rak4631_eth_gw_dbg]
 extends = env:rak4631
 board_level = extra
 
@@ -39,11 +47,11 @@ board_level = extra
 ; platform_packages = platformio/tool-openocd@^3.1200.0
 
 build_flags =
-  ${env:rak4631_mqtt_json.build_flags}
+  ${env:rak4631_eth_gw.build_flags}
   -D USE_SEMIHOSTING
 
 lib_deps =
-  ${env:rak4631_mqtt_json.lib_deps}
+  ${env:rak4631_eth_gw.lib_deps}
   https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
 
 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.