T1000-E Peripherals (#5141)

* T1000-E Peripherals
- enable intelligent charge controller signals
- enable Accelerometer
- enable internal I2C bus
- provide Power to Accelerometer

* POC Accelerometer Code (wakeScreen is moot for that device, just test if the driver works)
* fix building without the sensor

variants/tracker-t1000-e/platformio.ini

@@ -1,16 +1,14 @@
-; tracker-t1000-e  v0.9.1
 [env:tracker-t1000-e]
 extends = nrf52840_base
 board = tracker-t1000-e
-; board_level = extra
-; platform = https://github.com/maxgerhardt/platform-nordicnrf52#cac6fcf943a41accd2aeb4f3659ae297a73f422e
 build_flags = ${nrf52840_base.build_flags} -Ivariants/tracker-t1000-e -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52 -DTRACKER_T1000_E
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DGPS_POWER_TOGGLE
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/tracker-t1000-e>
 lib_deps = 
   ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/QMA6100P_Arduino_Library.git#14c900b8b2e4feaac5007a7e41e0c1b7f0841136
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil