Merge branch 'master' into wio-lr1110-refresh

boards/heltec_mesh_node_t114.json

@@ -0,0 +1,53 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "nrf52840_s140_v6.ld"
+    },
+    "core": "nRF5",
+    "cpu": "cortex-m4",
+    "extra_flags": "-DARDUINO_NRF52840_PCA10056 -DNRF52840_XXAA",
+    "f_cpu": "64000000L",
+    "hwids": [
+      ["0x239A", "0x4405"],
+      ["0x239A", "0x0029"],
+      ["0x239A", "0x002A"]
+    ],
+    "usb_product": "HT-n5262",
+    "mcu": "nrf52840",
+    "variant": "heltec_mesh_node_t114",
+    "variants_dir": "variants",
+    "bsp": {
+      "name": "adafruit"
+    },
+    "softdevice": {
+      "sd_flags": "-DS140",
+      "sd_name": "s140",
+      "sd_version": "6.1.1",
+      "sd_fwid": "0x00B6"
+    },
+    "bootloader": {
+      "settings_addr": "0xFF000"
+    }
+  },
+  "connectivity": ["bluetooth"],
+  "debug": {
+    "jlink_device": "nRF52840_xxAA",
+    "onboard_tools": ["jlink"],
+    "svd_path": "nrf52840.svd",
+    "openocd_target": "nrf52840-mdk-rs"
+  },
+  "frameworks": ["arduino"],
+  "name": "Heltec nrf (Adafruit BSP)",
+  "upload": {
+    "maximum_ram_size": 248832,
+    "maximum_size": 815104,
+    "speed": 115200,
+    "protocol": "nrfutil",
+    "protocols": ["jlink", "nrfjprog", "nrfutil", "stlink"],
+    "use_1200bps_touch": true,
+    "require_upload_port": true,
+    "wait_for_upload_port": true
+  },
+  "url": "FIXME",
+  "vendor": "Heltec"
+}

boards/heltec_vision_master_e213.json

@@ -0,0 +1,42 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "-DBOARD_HAS_PSRAM",
+      "-DARDUINO_USB_CDC_ON_BOOT=1",
+      "-DARDUINO_USB_MODE=0",
+      "-DARDUINO_RUNNING_CORE=1",
+      "-DARDUINO_EVENT_RUNNING_CORE=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      ["0x303A", "0x1001"],
+      ["0x303A", "0x0002"]
+    ],
+    "mcu": "esp32s3",
+    "variant": "heltec_vision_master_e213"
+  },
+  "connectivity": ["wifi", "bluetooth", "lora"],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": ["arduino", "espidf"],
+  "name": "Heltec Vision Master E213",
+  "upload": {
+    "flash_size": "8MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 8388608,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 921600
+  },
+  "url": "https://heltec.org/project/vision-master-e213/",
+  "vendor": "Heltec"
+}

boards/wio-sdk-wm1110.json

@@ -27,7 +27,7 @@
     "jlink_device": "nRF52840_xxAA",
     "svd_path": "nrf52840.svd"
   },
-  "frameworks": ["arduino"],
+  "frameworks": ["arduino", "freertos"],
   "name": "Seeed WIO WM1110",
   "upload": {
     "maximum_ram_size": 248832,

boards/wio-tracker-wm1110.json

@@ -23,7 +23,7 @@
       "sd_flags": "-DS140",
       "sd_name": "s140",
       "sd_version": "7.3.0",
-      "sd_fwid": "0x00B6"
+      "sd_fwid": "0x0123"
     },
     "bootloader": {
       "settings_addr": "0xFF000"

boards/wiscore_rak4631.json

@@ -35,7 +35,7 @@
     "svd_path": "nrf52840.svd",
     "openocd_target": "nrf52840-mdk-rs"
   },
-  "frameworks": ["arduino"],
+  "frameworks": ["arduino", "freertos"],
   "name": "WisCore RAK4631 Board",
   "upload": {
     "maximum_ram_size": 248832,