diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp
index 8cd3172f6..49d56512e 100644
--- a/src/mesh/NodeDB.cpp
+++ b/src/mesh/NodeDB.cpp
@@ -819,7 +819,7 @@ void NodeDB::installDefaultModuleConfig()
     moduleConfig.has_store_forward = true;
     moduleConfig.has_telemetry = true;
     moduleConfig.has_external_notification = true;
-#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION)
+#if defined(PIN_BUZZER) || defined(PIN_VIBRATION) || defined(LED_NOTIFICATION) || defined(PCA_LED_NOTIFICATION)
     moduleConfig.external_notification.enabled = true;
 #endif
 #if defined(PIN_BUZZER)
diff --git a/src/modules/ExternalNotificationModule.cpp b/src/modules/ExternalNotificationModule.cpp
index 3addc4b3a..16ccdd744 100644
--- a/src/modules/ExternalNotificationModule.cpp
+++ b/src/modules/ExternalNotificationModule.cpp
@@ -203,6 +203,10 @@ void ExternalNotificationModule::setExternalState(uint8_t index, bool on)
     default:
         if (output > 0)
             digitalWrite(output, (moduleConfig.external_notification.active ? on : !on));
+#ifdef PCA_LED_NOTIFICATION
+        io.digitalWrite(PCA_LED_NOTIFICATION, on);
+
+#endif
         break;
     }
 
diff --git a/src/platform/esp32/main-esp32.cpp b/src/platform/esp32/main-esp32.cpp
index 171911e5e..25cb30e96 100644
--- a/src/platform/esp32/main-esp32.cpp
+++ b/src/platform/esp32/main-esp32.cpp
@@ -231,7 +231,9 @@ void cpuDeepSleep(uint32_t msecToWake)
 #if SOC_RTCIO_HOLD_SUPPORTED && SOC_PM_SUPPORT_EXT_WAKEUP
     uint64_t gpioMask = (1ULL << (config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
 #endif
-
+#ifdef ALT_BUTTON_WAKE
+    gpioMask |= (1ULL << BUTTON_PIN_ALT);
+#endif
 #ifdef BUTTON_NEED_PULLUP
     gpio_pullup_en((gpio_num_t)BUTTON_PIN);
 #endif
diff --git a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
index 917341560..51a91bef0 100644
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
@@ -9,11 +9,11 @@ void earlyInitVariant()
     io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
     io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
     io.pinMode(PCA_LED_POWER, OUTPUT);
-    io.pinMode(PCA_LED_USER, OUTPUT);
+    io.pinMode(PCA_LED_NOTIFICATION, OUTPUT);
     io.pinMode(PCA_LED_ENABLE, OUTPUT);
 
     io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
-    io.digitalWrite(PCA_LED_USER, LOW);
+    io.digitalWrite(PCA_LED_NOTIFICATION, LOW);
     io.digitalWrite(PCA_LED_ENABLE, LOW);
 }
 
diff --git a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
index 223f60264..2d02c7f27 100644
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
@@ -8,9 +8,9 @@
 
 // LED
 // Both of these are on the GPIO expander
-#define PCA_LED_USER 1   // the Blue LED
-#define PCA_LED_ENABLE 2 // the power supply to the LEDs, in an OR arrangement with VBUS power
-#define PCA_LED_POWER 3  // the Red LED? Seems to have hardware logic to blink when USB is plugged in.
+#define PCA_LED_NOTIFICATION 1 // the Blue LED
+#define PCA_LED_ENABLE 2       // the power supply to the LEDs, in an OR arrangement with VBUS power
+#define PCA_LED_POWER 3        // the Red LED? Seems to have hardware logic to blink when USB is plugged in.
 #define POWER_LED_HARDWARE_BLINKS_WHILE_CHARGING
 
 // USB_CHECK
@@ -18,7 +18,7 @@
 #define BATTERY_PIN 8
 #define ADC_CHANNEL ADC1_GPIO8_CHANNEL
 
-#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+#define ADC_MULTIPLIER 2.0 // 2.0 + 10% for correction of display undervoltage.
 
 #define PIN_BUZZER 9
 
@@ -86,6 +86,7 @@
 
 #define BUTTON_PIN PIN_BUTTON1
 #define BUTTON_PIN_ALT PIN_BUTTON2
+#define ALT_BUTTON_WAKE
 
 #define SERIAL_PRINT_PORT 0
 #endif