nRF52840: Migrate variants to new structure (#7396)

2025-07-21 14:13:02 -05:00
parent 806bfa54b5
commit 9b983b6487
138 changed files with 264 additions and 176 deletions
@@ -0,0 +1,57 @@
+; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
+[env:rak4631]
+extends = nrf52840_base
+board = wiscore_rak4631
+board_check = true
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/rak4631
+  -D RAK_4631
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
+  -DEINK_WIDTH=250
+  -DEINK_HEIGHT=122
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  ${networking_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
+  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
+
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+[env:rak4631_dbg]
+extends = env:rak4631
+board_level = extra
+
+; if the builtin version of openocd has a buggy version of semihosting, so use the external version
+; platform_packages = platformio/tool-openocd@^3.1200.0
+
+build_flags =
+  ${env:rak4631.build_flags}
+  -D USE_SEMIHOSTING
+
+lib_deps =
+  ${env:rak4631.lib_deps}
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip
+
+; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
+; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
+;
+; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
+; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.
+
+upload_protocol = stlink
+; eventually use platformio/tool-pyocd@^2.3600.0 instad
+;upload_protocol = custom
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE