Add RAK4631 Ethernet Gateway with working JSON output to MQTT

2024-09-09 11:56:37 +08:00
parent e470619e3d
commit a5b79528b3
7 changed files with 712 additions and 8 deletions
@@ -0,0 +1,58 @@
+; The very slick RAK wireless RAK 4631 / 4630 board - Unified firmware for 5005/19003, with or without OLED RAK 1921
+[env:rak4631_mqtt_json]
+extends = nrf52840_base
+board = wiscore_rak4631
+board_check = true
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_mqtt_json -D RAK_4631
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
+  -DEINK_WIDTH=250
+  -DEINK_HEIGHT=122
+  -DNRF52_USE_JSON=1
+;   -DMESHTASTIC_EXCLUDE_GPS=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+;   -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_PKI=1
+  -DMESHTASTIC_EXCLUDE_POWER_FSM=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_mqtt_json> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  ${networking_base.lib_deps}
+  melopero/Melopero RV3028@^1.1.0
+  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  https://github.com/meshtastic/RAK12034-BMX160.git#4821355fb10390ba8557dc43ca29a023bcfbb9d9
+  bblanchon/ArduinoJson @ 6.21.4
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+[env:rak4631_mqtt_json_dbg]
+extends = env:rak4631
+board_level = extra
+
+; if the builtin version of openocd has a buggy version of semihosting, so use the external version
+; platform_packages = platformio/tool-openocd@^3.1200.0
+
+build_flags =
+  ${env:rak4631_mqtt_json.build_flags}
+  -D USE_SEMIHOSTING
+
+lib_deps =
+  ${env:rak4631_mqtt_json.lib_deps}
+  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+
+; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
+; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
+;
+; So I'm now trying the external openocd - but the openocd scripts for nrf52.cfg assume you are using a DAP adapter not an STLINK adapter.
+; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.
+
+upload_protocol = stlink
+; eventually use platformio/tool-pyocd@^2.3600.0 instad
+;upload_protocol = custom
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE