diff --git a/bin/config.d/lora-NebraHat_1W.yaml b/bin/config.d/lora-NebraHat_1W.yaml
new file mode 100644
index 000000000..9f3393713
--- /dev/null
+++ b/bin/config.d/lora-NebraHat_1W.yaml
@@ -0,0 +1,19 @@
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/NebraHat
+# Use for 1 watt hat
+Meta:
+  name: NebraHat 1W
+  support: community
+  compatible:
+    - raspberry-pi
+
+Lora:
+  Module: sx1262  # Nebra SX1262 Pi Hat - 1W
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+#  CS: 8          # Newer version of MeshtasticD do not need this? If issues uncomment this line
+  IRQ: 22
+  Busy: 4
+  Reset: 18
+  RXen: 25  
+I2C:
+  I2CDevice: /dev/i2c-1
\ No newline at end of file
diff --git a/bin/config.d/lora-NebraHat_2W.yaml b/bin/config.d/lora-NebraHat_2W.yaml
new file mode 100644
index 000000000..4b712dd8a
--- /dev/null
+++ b/bin/config.d/lora-NebraHat_2W.yaml
@@ -0,0 +1,20 @@
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/NebraHat
+# Use for 2 watt hat
+Meta:
+  name: NebraHat 2W
+  support: community
+  compatible:
+    - raspberry-pi
+
+Lora:
+  Module: sx1262  # Nebra SX1262 Pi Hat - 2W
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  SX126X_MAX_POWER: 8
+#  CS: 8          # Newer version of MeshtasticD do not need this? If issues uncomment this line
+  IRQ: 22
+  Busy: 4
+  Reset: 18
+  RXen: 25
+I2C:
+  I2CDevice: /dev/i2c-1
\ No newline at end of file
diff --git a/bin/config.d/lora-RAK6421-13300-slot1.yaml b/bin/config.d/lora-RAK6421-13300-slot1.yaml
index a88544896..086dadbc5 100644
--- a/bin/config.d/lora-RAK6421-13300-slot1.yaml
+++ b/bin/config.d/lora-RAK6421-13300-slot1.yaml
@@ -18,4 +18,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.0
-  # CS: 8
\ No newline at end of file
+  # CS: 8
diff --git a/bin/config.d/lora-RAK6421-13300-slot2.yaml b/bin/config.d/lora-RAK6421-13300-slot2.yaml
index 5fa3a7126..c0ed9017a 100644
--- a/bin/config.d/lora-RAK6421-13300-slot2.yaml
+++ b/bin/config.d/lora-RAK6421-13300-slot2.yaml
@@ -18,4 +18,4 @@ Lora:
   DIO3_TCXO_VOLTAGE: true
   DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
-  # CS: 7
\ No newline at end of file
+  # CS: 7
diff --git a/bin/config.d/lora-ZebraHat_1W.yaml b/bin/config.d/lora-ZebraHat_1W.yaml
new file mode 100644
index 000000000..f0b3c34d3
--- /dev/null
+++ b/bin/config.d/lora-ZebraHat_1W.yaml
@@ -0,0 +1,19 @@
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/ZebraHAT
+# Use for 1 watt hat
+Meta:
+  name: ZebraHat 1W
+  support: community
+  compatible:
+    - raspberry-pi
+
+Lora:
+  Module: sx1262  # Zebra SX1262 Pi Hat - 1W
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  SX126X_MAX_POWER: 18 
+  CS: 24
+  IRQ: 22
+  Busy: 27
+  Reset: 17
+I2C:
+  I2CDevice: /dev/i2c-1
diff --git a/bin/config.d/lora-ZebraHat_2W.yaml b/bin/config.d/lora-ZebraHat_2W.yaml
new file mode 100644
index 000000000..fe556ea77
--- /dev/null
+++ b/bin/config.d/lora-ZebraHat_2W.yaml
@@ -0,0 +1,20 @@
+# https://github.com/wehooper4/Meshtastic-Hardware/tree/main/ZebraHAT
+# Use for 2 watt hat
+Meta:
+  name: ZebraHat 2W
+  support: community
+  compatible:
+    - raspberry-pi
+
+Lora:
+  Module: sx1262  # Zebra SX1262 Pi Hat - 2W
+  DIO2_AS_RF_SWITCH: true
+  DIO3_TCXO_VOLTAGE: true
+  SX126X_MAX_POWER: 8 
+  CS: 24
+  IRQ: 22
+  Busy: 27
+  Reset: 17
+  RXen: 25
+I2C:
+  I2CDevice: /dev/i2c-1
diff --git a/bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml b/bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml
index e0ef946d9..5121e8a61 100644
--- a/bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml
+++ b/bin/config.d/lora-ecb41-pge-RAK6421-13300-slot2.yaml
@@ -29,6 +29,8 @@ Lora:
     - pin: 50 # GPIO1_C2 (physical 16)
       gpiochip: 1
       line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
   #   pin: 7
diff --git a/bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml b/bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml
index 5548bc5c7..0417d36e9 100644
--- a/bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml
+++ b/bin/config.d/lora-ecb41-pge-RAK6421-13302-slot2.yaml
@@ -29,6 +29,8 @@ Lora:
     - pin: 50 # GPIO1_C2 (physical 16)
       gpiochip: 1
       line: 18
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_A7 (SPI1_CSN1, physical 26)
   #   pin: 7
diff --git a/bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml b/bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml
index 255a3eca3..63648432c 100644
--- a/bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml
+++ b/bin/config.d/lora-lyra-zero-RAK6421-13300-slot2.yaml
@@ -29,6 +29,8 @@ Lora:
     - pin: 13 # GPIO0_B5
       gpiochip: 0
       line: 13
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_B1
   #   pin: 9
diff --git a/bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml b/bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml
index 773a35ab0..d3baebd45 100644
--- a/bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml
+++ b/bin/config.d/lora-lyra-zero-RAK6421-13302-slot2.yaml
@@ -29,6 +29,8 @@ Lora:
     - pin: 13 # GPIO0_B5
       gpiochip: 0
       line: 13
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_B1
   #   pin: 9
diff --git a/bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml b/bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml
index 969c20ad3..225fb5f8d 100644
--- a/bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml
+++ b/bin/config.d/lora-ok3506-RAK6421-13300-slot2.yaml
@@ -31,6 +31,8 @@ Lora:
     - pin: 103 # GPIO3_A7 (physical 16)
       gpiochip: 3
       line: 7
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
   #   pin: 15
diff --git a/bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml b/bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml
index 36b70658b..ffb221fba 100644
--- a/bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml
+++ b/bin/config.d/lora-ok3506-RAK6421-13302-slot2.yaml
@@ -31,6 +31,8 @@ Lora:
     - pin: 103 # GPIO3_A7 (physical 16)
       gpiochip: 3
       line: 7
+  DIO3_TCXO_VOLTAGE: true
+  DIO2_AS_RF_SWITCH: true
   spidev: spidev0.1
   # CS: # GPIO0_B7 (SPI0_CSN1, physical 26)
   #   pin: 15
diff --git a/bin/config.d/lora-usb-meshtoad-e22.yaml b/bin/config.d/lora-usb-meshtoad-e22.yaml
index 49182c83e..3d8b15783 100644
--- a/bin/config.d/lora-usb-meshtoad-e22.yaml
+++ b/bin/config.d/lora-usb-meshtoad-e22.yaml
@@ -1,3 +1,5 @@
+# This config works with all revisions of the Meshtoad USB radio.
+
 Meta:
   name: meshtoad-e22
   support: official