Crowpanel 4.3, 5.0, 7.0 support (#6611)

* SD software SPI control
* fix notification crash;
* allow wake on touch
* don't build non-MUI variants
* use pwm buzzer
* Finalize support for Crowpanel TFT 2.4, 2.8 and 3.5
* add hardware ID for TFT panels
* Add stubs for the bigger panels. WIP!
* fix braces
* elecrow 4.3, 5.0, 7.0 support
* completed implementation 4.3, 5.0, 7.0 variants
* NodeDB default config & simplified light sleep macros
* trunk fmt
* remove flags
* removed leftovers (note: rtc gpios are only needed for deep sleep; the remove section caused issues with the elecrows)
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>
Co-authored-by: Austin <vidplace7@gmail.com>

variants/elecrow_panel/platformio.ini

@@ -4,10 +4,8 @@ board = crowpanel
 board_check = true
 upload_protocol = esptool
 board_build.partitions = default_16MB.csv ; must be here for some reason, board.json is not enough !?
-
 build_flags = ${esp32s3_base.build_flags} -Os
   -I variants/elecrow_panel
-  -D ELECROW
   -D ELECROW_PANEL
   -D CONFIG_ARDUHAL_LOG_COLORS
   -D RADIOLIB_DEBUG_SPI=0
@@ -22,15 +20,15 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
   -D MESHTASTIC_EXCLUDE_SCREEN=1
   -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-;  -D INPUTDRIVER_BUTTON_TYPE=0
   -D HAS_TELEMETRY=0
   -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D USE_PIN_BUZZER
   -D HAS_SCREEN=0
   -D HAS_TFT=1
   -D RAM_SIZE=6144
-	-D LV_LVGL_H_INCLUDE_SIMPLE
-	-D LV_CONF_INCLUDE_SIMPLE
-	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
   -D LV_USE_SYSMON=0
   -D LV_USE_PROFILER=0
   -D LV_USE_PERF_MONITOR=0
@@ -40,29 +38,44 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D USE_LOG_DEBUG
   -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
   -D USE_PACKET_API
+  -D HAS_SDCARD
+  -D SD_SPI_FREQUENCY=75000000
 
 lib_deps = ${esp32s3_base.lib_deps}
   ${device-ui_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
-  lovyan03/LovyanGFX@^1.2.0
-  hideakitai/TCA9534@^0.1.1
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.0.1
+  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  hideakitai/TCA9534@0.1.1
 
-[env:elecrow-24-28-tft]
+[crowpanel_small] ; 2.4, 2.8, 3.5 inch
 extends = crowpanel_base
-
 build_flags =
   ${crowpanel_base.build_flags}
-  -D TFT_HEIGHT=320 ; needed in variant.h
-  -D HAS_SDCARD
+  -D CROW_SELECT=1
   -D SDCARD_USE_SOFT_SPI
+  -D SDCARD_CS=7
   -D SPI_DRIVER_SELECT=2
-  -D USE_PIN_BUZZER
-;  -D INPUTDRIVER_BUTTON_TYPE=0 ; no button as this pin is assigned to LoRa cs!
-  -D SCREEN_TOUCH_INT=47 ; used to wake up the MCU by touch
   -D LGFX_DRIVER_TEMPLATE
   -D LGFX_DRIVER=LGFX_GENERIC
   -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
+  -D VIEW_320x240
+  -D MAP_FULL_REDRAW
+
+[crowpanel_large] ; 4.3, 5.0, 7.0 inch
+extends = crowpanel_base
+build_flags =
+  ${crowpanel_base.build_flags}
+  -D CROW_SELECT=2
+  -D SDCARD_CS=7
+  -D LGFX_DRIVER=LGFX_ELECROW70
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_ELECROW70.h\"
+  -D DISPLAY_SET_RESOLUTION
+
+[env:elecrow-adv-24-28-tft]
+extends = crowpanel_small
+build_flags =
+  ${crowpanel_small.build_flags}
   -D SPI_FREQUENCY=80000000
   -D LGFX_SCREEN_WIDTH=240
   -D LGFX_SCREEN_HEIGHT=320
@@ -81,25 +94,12 @@ build_flags =
   -D LGFX_TOUCH_INT=47
   -D LGFX_TOUCH_RST=48
   -D LGFX_TOUCH_ROTATION=0
-  -D VIEW_320x240
-  -D MAP_FULL_REDRAW
-
-[env:elecrow-35-tft]
-extends = crowpanel_base
 
+[env:elecrow-adv-35-tft]
+extends = crowpanel_small
 build_flags =
-  ${crowpanel_base.build_flags}
-  -D TFT_HEIGHT=480 ; needed in variant.h
-  -D HAS_SDCARD
-  -D SDCARD_USE_SOFT_SPI
-  -D SPI_DRIVER_SELECT=2
-  -D USE_PIN_BUZZER
-;  -D INPUTDRIVER_BUTTON_TYPE=0 ; no button as this pin is assigned to LoRa cs!
-  -D SCREEN_TOUCH_INT=47 ; used to wake up the MCU by touch
+  ${crowpanel_small.build_flags}
   -D LV_CACHE_DEF_SIZE=2097152
-  -D LGFX_DRIVER_TEMPLATE
-  -D LGFX_DRIVER=LGFX_GENERIC
-  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
   -D SPI_FREQUENCY=60000000
   -D LGFX_SCREEN_WIDTH=320
   -D LGFX_SCREEN_HEIGHT=480
@@ -119,5 +119,10 @@ build_flags =
   -D LGFX_TOUCH_RST=48
   -D LGFX_TOUCH_ROTATION=0
   -D DISPLAY_SET_RESOLUTION
+
+; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
+[env:elecrow-adv1-43-50-70-tft]
+extends = crowpanel_large
+build_flags =
+  ${crowpanel_large.build_flags}
   -D VIEW_320x240
-  -D MAP_FULL_REDRAW