kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 6 Packages Projects Releases Wiki Activity

Added compatibility with LilyGo T-Deck-Pro V1.1

Browse Source
This commit is contained in:
lewisxhe
2026-04-18 11:11:41 -05:00
committed by Ben Meadors
co-authored by Ben Meadors
parent 2c8dec2fbd
commit d31d0f85fe
8 changed files with 367 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/main.cpp
+60
View File
@@ -343,6 +343,66 @@ void setup()
digitalWrite(BLE_LED, LED_STATE_OFF);
#endif
#if defined(T_DECK)
// GPIO10 manages all peripheral power supplies
// Turn on peripheral power immediately after MUC starts.
// If some boards are turned on late, ESP32 will reset due to low voltage.
// ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
// TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
pinMode(KB_POWERON, OUTPUT);
digitalWrite(KB_POWERON, HIGH);
// T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
// We need to initialize all CS pins in advance otherwise there will be SPI communication issues
// e.g. when detecting the SD card
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
delay(100);
#elif defined(T_DECK_PRO)
pinMode(LORA_EN, OUTPUT);
digitalWrite(LORA_EN, HIGH);
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(PIN_EINK_CS, OUTPUT);
digitalWrite(PIN_EINK_CS, HIGH);
pinMode(PIN_EINK_RES, OUTPUT);
digitalWrite(PIN_EINK_RES, HIGH);
pinMode(CST328_PIN_RST, OUTPUT);
digitalWrite(CST328_PIN_RST, HIGH);
#elif defined(T_LORA_PAGER)
pinMode(LORA_CS, OUTPUT);
digitalWrite(LORA_CS, HIGH);
pinMode(SDCARD_CS, OUTPUT);
digitalWrite(SDCARD_CS, HIGH);
pinMode(TFT_CS, OUTPUT);
digitalWrite(TFT_CS, HIGH);
pinMode(KB_INT, INPUT_PULLUP);
// io expander
io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
io.pinMode(EXPANDS_DRV_EN, OUTPUT);
io.digitalWrite(EXPANDS_DRV_EN, HIGH);
io.pinMode(EXPANDS_AMP_EN, OUTPUT);
io.digitalWrite(EXPANDS_AMP_EN, LOW);
io.pinMode(EXPANDS_LORA_EN, OUTPUT);
io.digitalWrite(EXPANDS_LORA_EN, HIGH);
io.pinMode(EXPANDS_GPS_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPS_EN, HIGH);
io.pinMode(EXPANDS_KB_EN, OUTPUT);
io.digitalWrite(EXPANDS_KB_EN, HIGH);
io.pinMode(EXPANDS_SD_EN, OUTPUT);
io.digitalWrite(EXPANDS_SD_EN, HIGH);
io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
io.pinMode(EXPANDS_SD_PULLEN, INPUT);
#elif defined(HACKADAY_COMMUNICATOR)
pinMode(KB_INT, INPUT);
#endif
concurrency::hasBeenSetup = true;
#if HAS_SCREEN
meshtastic_Config_DisplayConfig_OledType screen_model =