add heltec-v4-r8 board (#10268)

* add heltec-v4-r8 board

* Fixed default SPI pin and macro definition errors.

* update platformio.ini according device-ui LGFX display definitions

Co-authored-by: Copilot <copilot@github.com>

* fix commit reference

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Co-authored-by: Copilot <copilot@github.com>
Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com>

variants/esp32s3/heltec_v4/platformio.ini

@@ -89,8 +89,10 @@ build_flags =
   -D VIEW_240x320
   -D DISPLAY_SET_RESOLUTION
   -D DISPLAY_SIZE=240x320 ; portrait mode
+  -D LGFX_SPI_3WIRE=true
   -D LGFX_PIN_SCK=17
   -D LGFX_PIN_MOSI=33
+  -D LGFX_PIN_MISO=-1
   -D LGFX_PIN_DC=16
   -D LGFX_PIN_CS=15
   -D LGFX_PIN_BL=21
@@ -123,7 +125,7 @@ build_flags =
   -D SCREEN_TRANSITION_FRAMERATE=5
   -D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
   -D HAS_TOUCHSCREEN=1
-  -D TOUCH_I2C_PORT=0
+  -D TOUCH_I2C_PORT=1
   -D TOUCH_SLAVE_ADDRESS=0x2E
   -D SCREEN_TOUCH_INT=TOUCH_INT_PIN
   -D SCREEN_TOUCH_RST=TOUCH_RST_PIN

variants/esp32s3/heltec_v4_r8/pins_arduino.h

@@ -0,0 +1,56 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+static const uint8_t SS = 8;
+static const uint8_t MOSI = 10;
+static const uint8_t MISO = 11;
+static const uint8_t SCK = 9;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/heltec_v4_r8/platformio.ini

@@ -0,0 +1,145 @@
+[heltec_v4_r8_base] 
+extends = esp32s3_base
+board = heltec_v4_r8
+board_check = true
+board_build.partitions = default_16MB.csv
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -D HELTEC_V4_R8
+  -D HAS_LORA_FEM=1
+  -D BOARD_HAS_PSRAM
+  -I variants/esp32s3/heltec_v4_r8
+  -ULED_BUILTIN
+
+[env:heltec-v4-r8-oled]
+custom_meshtastic_hw_model = 132
+custom_meshtastic_hw_model_slug = HELTEC_V4_R8
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V4 R8
+custom_meshtastic_images = heltec_v4_r8.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = heltec_v4_r8_base
+build_flags = 
+  ${heltec_v4_r8_base.build_flags}
+  -D HELTEC_V4_R8_OLED
+  -D USE_SSD1306 ; Heltec_v4_R8 has an SSD1315 display (compatible with SSD1306 driver)
+  -D LED_POWER=46
+  -D RESET_OLED=21
+  -D I2C_SDA=17
+  -D I2C_SCL=18
+
+[env:heltec-v4-r8-tft]
+custom_meshtastic_hw_model = 132
+custom_meshtastic_hw_model_slug = HELTEC_V4_R8
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V4 R8 TFT
+custom_meshtastic_images = heltec_v4_r8_tft.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = heltec_v4_r8_base
+build_flags = 
+  ${heltec_v4_r8_base.build_flags} ;-Os
+  -D HELTEC_V4_R8_TFT
+  -D I2C_SDA=17
+  -D I2C_SCL=18
+  -D PIN_BUTTON2=46
+  -D ALT_BUTTON_PIN=PIN_BUTTON2
+  -D ALT_BUTTON_ACTIVE_LOW=false
+  -D PIN_BUZZER=4
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D CONFIG_ARDUHAL_LOG_COLORS
+  -D RADIOLIB_DEBUG_SPI=0
+  -D RADIOLIB_DEBUG_PROTOCOL=0
+  -D RADIOLIB_DEBUG_BASIC=0
+  -D RADIOLIB_VERBOSE_ASSERT=0
+  -D RADIOLIB_SPI_PARANOID=0
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D RAM_SIZE=5120
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D LV_BUILD_TEST=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D USE_PACKET_API
+  -D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
+  -D VIEW_240x320
+  -D DISPLAY_SET_RESOLUTION
+  -D DISPLAY_SIZE=240x320 ; portrait mode
+  -D LGFX_SPI_3WIRE=false
+  -D LGFX_PIN_SCK=16
+  -D LGFX_PIN_MOSI=15
+  -D LGFX_PIN_MISO=45
+  -D LGFX_PIN_DC=48
+  -D LGFX_PIN_CS=47
+  -D LGFX_PIN_BL=44
+  -D LGFX_PIN_RST=21
+  -D CUSTOM_TOUCH_DRIVER
+  -D TOUCH_SDA_PIN=I2C_SDA
+  -D TOUCH_SCL_PIN=I2C_SCL
+  -D TOUCH_INT_PIN=-1
+  -D TOUCH_RST_PIN=-1
+;base UI
+  -D TFT_CS=LGFX_PIN_CS
+  -D ST7789_CS=TFT_CS
+  -D ST7789_RS=LGFX_PIN_DC
+  -D ST7789_SDA=LGFX_PIN_MOSI
+  -D ST7789_SCK=LGFX_PIN_SCK
+  -D ST7789_RESET=LGFX_PIN_RST
+  -D ST7789_MISO=LGFX_PIN_MISO
+  -D ST7789_BUSY=-1
+  -D ST7789_BL=LGFX_PIN_BL
+  -D ST7789_SPI_HOST=SPI3_HOST
+  -D TFT_BL=ST7789_BL
+  -D SPI_FREQUENCY=75000000
+  -D SPI_READ_FREQUENCY=SPI_FREQUENCY
+  -D SPI_3_WIRE=false
+  -D TFT_HEIGHT=320
+  -D TFT_WIDTH=240
+  -D TFT_OFFSET_X=0
+  -D TFT_OFFSET_Y=0
+  -D TFT_OFFSET_ROTATION=0
+  -D SCREEN_ROTATE
+  -D SCREEN_TRANSITION_FRAMERATE=5
+  -D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
+  -D HAS_TOUCHSCREEN=1
+  -D TOUCH_I2C_PORT=0
+  -D TOUCH_SLAVE_ADDRESS=0x2E
+  -D SCREEN_TOUCH_INT=TOUCH_INT_PIN
+  -D SCREEN_TOUCH_RST=TOUCH_RST_PIN
+
+; Have SPI interface SD card slot
+  -D HAS_SDCARD
+  -D SDCARD_USE_SPI1
+  -D SDCARD_USER_SPI_BEGIN
+  -D SPI_MOSI=LGFX_PIN_MOSI
+  -D SPI_SCK=LGFX_PIN_SCK
+  -D SPI_MISO=LGFX_PIN_MISO
+  -D SPI_CS=3
+  -D SDCARD_CS=SPI_CS
+  -D SD_SPI_FREQUENCY=SPI_FREQUENCY
+
+lib_deps = ${heltec_v4_r8_base.lib_deps}
+  ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.19
+  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
+  https://github.com/Quency-D/chsc6x/archive/3b2b6cebf3177b3e2c33d06e07909b0b10159516.zip

variants/esp32s3/heltec_v4_r8/variant.h

@@ -0,0 +1,72 @@
+#define VEXT_ENABLE 40 // active low, powers the oled display and the lora antenna boost
+#define VEXT_ON_VALUE LOW
+#define BUTTON_PIN 0
+
+#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
+#define ADC_MULTIPLIER 4.9 * 1.035
+
+#define USE_SX1262
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 12
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 13 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
+
+#define LORA_SCK 9
+#define LORA_MISO 11
+#define LORA_MOSI 10
+#define LORA_CS 8
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Enable Traffic Management Module for Heltec V4
+#ifndef HAS_TRAFFIC_MANAGEMENT
+#define HAS_TRAFFIC_MANAGEMENT 1
+#endif
+#ifndef TRAFFIC_MANAGEMENT_CACHE_SIZE
+#define TRAFFIC_MANAGEMENT_CACHE_SIZE 2048
+#endif
+
+// ---- KCT8103L RF FRONT END CONFIGURATION ----
+// The Heltec V4.3 uses a KCT8103L FEM chip with integrated PA and LNA
+// RF path: SX1262 -> Pi attenuator -> KCT8103L PA -> Antenna
+// Control logic (from KCT8103L datasheet):
+//   Transmit PA:     CSD=1, CTX=1, CPS=1
+//   Receive LNA:     CSD=1, CTX=0, CPS=X  (21dB gain, 1.9dB NF)
+//   Receive bypass:  CSD=1, CTX=1, CPS=0
+//   Shutdown:        CSD=0, CTX=X, CPS=X
+// Pin mapping:
+//   CPS (pin 5)  -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
+//   CSD (pin 4)  -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
+//   CTX (pin 6)  -> GPIO5: Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
+//   VCC0/VCC1    -> Vfem via U3 LDO, controlled by GPIO7
+// KCT8103L FEM: TX/RX path switching is handled by DIO2 -> CPS pin (via SX126X_DIO2_AS_RF_SWITCH)
+
+#define USE_KCT8103L_PA
+#define LORA_PA_POWER 7        // VFEM_Ctrl - KCT8103L LDO power enable
+#define LORA_KCT8103L_PA_CSD 2 // CSD - KCT8103L chip enable (HIGH=on)
+#define LORA_KCT8103L_PA_CTX 5 // CTX - Switch between Receive LNA Mode and Receive Bypass Mode. (HIGH=RX bypass, LOW=RX LNA)
+
+#if HAS_TFT
+#define USE_TFTDISPLAY 1
+#endif
+/*
+ * GPS pins
+ */
+#define GPS_L76K
+#define PIN_GPS_EN (42)
+#define GPS_EN_ACTIVE LOW
+#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
+#define PIN_GPS_PPS (41)
+// Seems to be missing on this new board
+#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
+#define GPS_THREAD_INTERVAL 50