diff --git a/variants/nrf52840/diy/moonshine_NRF52_mini/readme.md b/variants/nrf52840/diy/moonshine_NRF52_mini/readme.md
index 2b5bb9dfe..98fc1c4bb 100644
--- a/variants/nrf52840/diy/moonshine_NRF52_mini/readme.md
+++ b/variants/nrf52840/diy/moonshine_NRF52_mini/readme.md
@@ -1,7 +1,7 @@
 # Moonshine NRF52 Mini
 
 Minimal DIY Meshtastic node variant: nRF52840 + RA-01S-P (SX1262) LoRa module
-with a single status LED on P0.13. No display, GPS, button, or battery ADC -
+with a single status LED on P0.15. No display, GPS, button, or battery ADC -
 LoRa-only minimal system.
 
 ## Hardware
@@ -12,7 +12,7 @@ LoRa-only minimal system.
   - `SX126X_MAX_POWER=22`
   - `TCXO_OPTIONAL` (no TCXO on module - firmware tries XTAL first)
   - DIO2 drives TXEN internally; RXEN is controlled by `P0.17`
-- **LED**: status LED on P0.13 (active high, `LED_STATE_ON = 1`)
+- **LED**: status LED on P0.15 (active high, `LED_STATE_ON = 1`)
 
 ## Pin map
 
@@ -21,14 +21,14 @@ LoRa-only minimal system.
 | SPI_MISO    | P0.02 | LORA_MISO                      |
 | LORA_RESET  | P0.09 | SX126X_RESET                   |
 | LORA_DIO1   | P0.10 | SX126X_DIO1 (IRQ)              |
-| LED         | P0.13 | Status LED (active high)       |
+| LED         | P0.15 | Status LED (active high)       |
 | LORA_RXEN   | P0.17 | SX126X_RXEN                    |
 | LORA_BUSY   | P0.29 | SX126X_BUSY                    |
 | SPI_SCK     | P1.11 | LORA_SCK                       |
 | LORA_CS     | P1.13 | SX126X_CS                      |
 | SPI_MOSI    | P1.15 | LORA_MOSI                      |
 
-Only the status LED on P0.13 is wired (no button, battery ADC, GPS, or display).
+Only the status LED on P0.15 is wired (no button, battery ADC, GPS, or display).
 The board has no user button, so DFU entry is via the 1200 bps touch or SWD.
 
 ## Build & Flash
diff --git a/variants/nrf52840/diy/moonshine_NRF52_mini/variant.h b/variants/nrf52840/diy/moonshine_NRF52_mini/variant.h
index 37a3f315f..1828a257b 100644
--- a/variants/nrf52840/diy/moonshine_NRF52_mini/variant.h
+++ b/variants/nrf52840/diy/moonshine_NRF52_mini/variant.h
@@ -24,7 +24,7 @@ MOONSHINE NRF52 MINI PIN ASSIGNMENT (minimal system: nRF52840 + RA-01S-P)
 | P0.02 | SPI MISO    | LORA_MISO                   |
 | P0.09 | LORA RESET  | SX126X_RESET                |
 | P0.10 | LORA DIO1   | SX126X_DIO1 (IRQ)           |
-| P0.13 | LED         | Status LED (active high)    |
+| P0.15 | LED         | Status LED (active high)    |
 | P0.17 | LORA RXEN   | SX126X_RXEN                 |
 | P0.29 | LORA BUSY   | SX126X_BUSY                 |
 | P1.11 | SPI SCK     | LORA_SCK                    |
@@ -41,8 +41,8 @@ MOONSHINE NRF52 MINI PIN ASSIGNMENT (minimal system: nRF52840 + RA-01S-P)
 // No dedicated 3V3 enable pin on this board
 #define PIN_3V3_EN (-1)
 
-// LED - status LED on P0.13 (active high)
-#define PIN_LED1 (0 + 13) // P0.13
+// LED - status LED on P0.15 (active high)
+#define PIN_LED1 (0 + 15) // P0.15
 #define LED_BLUE PIN_LED1
 #define LED_STATE_ON 1 // State when LED is lit (active high)