Replace PIO fuzzy version matches (reproducible builds) (#8984)

This change does not introduce version *changes*, but simply "updates" to the version already being referenced by the fuzzy-match (^)
2025-12-15 19:48:34 -06:00
parent eafa8c7b47
commit ed77ba5612
59 changed files with 105 additions and 105 deletions
@@ -11,5 +11,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_nRF52840-pca10059-v1>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
@@ -24,8 +24,8 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps = 
  ${nrf52840_base.lib_deps}
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  khoih-prog/nRF52_PWM@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
+  khoih-prog/nRF52_PWM@1.0.1
 ;upload_protocol = fs

 [env:thinknode_m1-inkhud]
@@ -45,4 +45,4 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
@@ -13,5 +13,5 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M3>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  khoih-prog/nRF52_PWM@^1.0.1
-  lewisxhe/PCF8563_Library@^1.0.1
+  khoih-prog/nRF52_PWM@1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
@@ -12,4 +12,4 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
 lib_deps =
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
@@ -15,7 +15,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD_e-ink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
@@ -13,6 +13,6 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MakePyt
 lib_deps = 
  ${nrf52840_base.lib_deps}
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
@@ -8,5 +8,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mesh_v4>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
+  zinggjm/GxEPD2@1.6.5
 debug_tool = jlink
@@ -11,5 +11,5 @@ build_flags =
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/canaryone>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs
@@ -14,7 +14,7 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 extra_scripts =
  ${env.extra_scripts}
  variants/nrf52840/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
@@ -13,5 +13,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_node_t114>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
@@ -25,7 +25,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d


@@ -71,7 +71,7 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_pocket> 
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d


@@ -14,7 +14,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_
 lib_deps = 
  ${nrf52840_base.lib_deps}
  https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
  ArduinoJson@6.21.4
 [env:heltec-mesh-solar]
 extends = heltec_mesh_solar_base
@@ -10,5 +10,5 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2-ultra>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs
@@ -2,7 +2,7 @@
 ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
 platform =
  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
-  platformio/nordicnrf52@^10.8.0
+  platformio/nordicnrf52@10.10.0
 extends = arduino_base
 platform_packages =
  ; our custom Git version until they merge our PR
@@ -14,5 +14,5 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
  artronshop/ArtronShop_RX8130CE@1.0.0
@@ -14,7 +14,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak2560
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${nrf52_networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
  https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
@@ -16,9 +16,9 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak3401
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  melopero/Melopero RV3028@1.2.0
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip

 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
@@ -23,10 +23,10 @@ build_src_filter = ${nrf52_base.build_src_filter} \
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${nrf52_networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip

@@ -42,7 +42,7 @@ extends = env:rak4631
 board_level = extra

 ; if the builtin version of openocd has a buggy version of semihosting, so use the external version
-; platform_packages = platformio/tool-openocd@^3.1200.0
+; platform_packages = platformio/tool-openocd@3.1200.0

 build_flags =
  ${env:rak4631.build_flags}
@@ -59,6 +59,6 @@ lib_deps =
 ; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.

 upload_protocol = stlink
-; eventually use platformio/tool-pyocd@^2.3600.0 instad
+; eventually use platformio/tool-pyocd@2.3600.0 instad
 ;upload_protocol = custom
 ;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
@@ -14,11 +14,11 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631_epaper>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  melopero/Melopero RV3028@^1.1.0
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAKwireless RAK12034@^1.0.0
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  zinggjm/GxEPD2@1.6.5
+  melopero/Melopero RV3028@1.2.0
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAKwireless RAK12034@1.0.0
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
@@ -16,11 +16,11 @@ build_flags = ${nrf52840_base.build_flags}
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631_epaper_onrxtx>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  melopero/Melopero RV3028@^1.1.0
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  beegee-tokyo/RAKwireless RAK12034@^1.0.0
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  zinggjm/GxEPD2@1.6.5
+  melopero/Melopero RV3028@1.2.0
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  beegee-tokyo/RAKwireless RAK12034@1.0.0
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
@@ -27,12 +27,12 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
-  bblanchon/ArduinoJson @ 6.21.4
+  bblanchon/ArduinoJson@6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
 ;upload_protocol = jlink
@@ -45,7 +45,7 @@ extends = env:rak4631
 board_level = extra

 ; if the builtin version of openocd has a buggy version of semihosting, so use the external version
-; platform_packages = platformio/tool-openocd@^3.1200.0
+; platform_packages = platformio/tool-openocd@3.1200.0

 build_flags =
  ${env:rak4631_eth_gw.build_flags}
@@ -62,6 +62,6 @@ lib_deps =
 ; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.

 upload_protocol = stlink
-; eventually use platformio/tool-pyocd@^2.3600.0 instad
+; eventually use platformio/tool-pyocd@2.3600.0 instad
 ;upload_protocol = custom
 ;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
@@ -29,7 +29,7 @@ extends = env:rak4631_nomadstar_meteor_pro
 board_level = extra

 ; if the builtin version of openocd has a buggy version of semihosting, so use the external version
-; platform_packages = platformio/tool-openocd@^3.1200.0
+; platform_packages = platformio/tool-openocd@3.1200.0

 build_flags =
  ${env:rak4631.build_flags}
@@ -46,6 +46,6 @@ lib_deps =
 ; In theory I could change those scripts.  But for now I'm trying going back to a DAP adapter but with the external openocd.

 upload_protocol = stlink
-; eventually use platformio/tool-pyocd@^2.3600.0 instad
+; eventually use platformio/tool-pyocd@2.3600.0 instad
 ;upload_protocol = custom
-;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
+;upload_command = pyocd flash -t nrf52840 $UPLOADERFLAGS $SOURCE
@@ -18,13 +18,13 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak_wis
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${nrf52_networking_base.lib_deps}
-  melopero/Melopero RV3028@^1.1.0
+  melopero/Melopero RV3028@1.2.0
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
-  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  bodmer/TFT_eSPI
-  beegee-tokyo/RAKwireless RAK12034@^1.0.0
-  beegee-tokyo/RAK14014-FT6336U @ 1.0.1
-  beegee-tokyo/RAK12035_SoilMoisture@^1.0.4
+  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
+  bodmer/TFT_eSPI@2.5.43
+  beegee-tokyo/RAKwireless RAK12034@1.0.0
+  beegee-tokyo/RAK14014-FT6336U@1.0.1
+  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
@@ -21,7 +21,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/t-echo>
 lib_deps = 
  ${nrf52840_base.lib_deps}
  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
 ;upload_protocol = fs

 [env:t-echo-inkhud]
@@ -41,4 +41,4 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  lewisxhe/PCF8563_Library@1.0.1