tlora-t3s3-epaper: e-ink startup and build cleanup (#10973)

* T3s3 Eink

* Update SerialConsole.cpp

* Update

* Update SerialConsole.h

* Update EInkDisplay2.cpp

src/FSCommon.h

@@ -65,3 +65,9 @@ std::vector<meshtastic_FileInfo> getFiles(const char *dirname, uint8_t levels, s
 void listDir(const char *dirname, uint8_t levels, bool del = false);
 void rmDir(const char *dirname);
 void setupSDCard();
+
+#if defined(HAS_SDCARD) && !defined(SDCARD_USE_SOFT_SPI) && defined(SDCARD_USE_SPI1)
+#include <SPI.h>
+// HSPI bus set up by setupSDCard(). Reuse this for other devices on the same bus.
+extern SPIClass SPI_HSPI;
+#endif

src/graphics/EInkDisplay2.cpp

@@ -2,6 +2,7 @@
 
 #if defined(USE_EINK) && !defined(USE_EINK_PARALLELDISPLAY)
 #include "EInkDisplay2.h"
+#include "FSCommon.h"
 #include "SPILock.h"
 #include "main.h"
 #include <SPI.h>
@@ -214,9 +215,23 @@ bool EInkDisplay::connect()
     defined(CROWPANEL_ESP32S3_5_EPAPER) || defined(CROWPANEL_ESP32S3_4_EPAPER) || defined(CROWPANEL_ESP32S3_2_EPAPER) ||         \
     defined(MINI_EPAPER_S3)
     {
+#if defined(TLORA_T3S3_EPAPER)
+        // T3-S3 shares HSPI with the SD card; preconfigure the panel control pins.
+        hspi = &SPI_HSPI;
+        pinMode(PIN_EINK_CS, OUTPUT);
+        pinMode(PIN_EINK_DC, OUTPUT);
+        pinMode(PIN_EINK_BUSY, INPUT);
+        if (PIN_EINK_RES >= 0) {
+            pinMode(PIN_EINK_RES, OUTPUT);
+            digitalWrite(PIN_EINK_RES, HIGH);
+        }
+        digitalWrite(PIN_EINK_CS, HIGH);
+        digitalWrite(PIN_EINK_DC, HIGH);
+#else
         // Start HSPI
         hspi = new SPIClass(HSPI);
         hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS); // SCLK, MISO, MOSI, SS
+#endif
         // VExt already enabled in setup()
         // RTC GPIO hold disabled in setup()
 

src/graphics/niche/InkHUD/PlatformioConfig.ini

@@ -1,6 +1,21 @@
 [inkhud]
 build_src_filter =
   +<graphics/niche/>; Include the nicheGraphics directory
+  -<graphics/draw/> ; BaseUI renderer stack is disabled for InkHUD
+  -<graphics/fonts/> ; InkHUD uses GFX_Root fonts instead of BaseUI font tables
+  -<graphics/EInkDisplay2.cpp> ; InkHUD drives e-ink through niche drivers
+  -<graphics/EInkDynamicDisplay.cpp>
+  -<graphics/EInkParallelDisplay.cpp>
+  -<graphics/EmoteRenderer.cpp>
+  -<graphics/emotes.cpp>
+  -<graphics/Panel_sdl.cpp>
+  -<graphics/ScreenGlobals.cpp>
+  -<graphics/SharedUIDisplay.cpp>
+  -<graphics/TFTColorRegions.cpp>
+  -<graphics/TFTDisplay.cpp>
+  -<graphics/tftSetup.cpp>
+  -<graphics/TimeFormatters.cpp>
+  -<graphics/VirtualKeyboard.cpp>
 build_flags =
   -D MESHTASTIC_INCLUDE_NICHE_GRAPHICS ; Use NicheGraphics
   -D MESHTASTIC_INCLUDE_INKHUD ; Use InkHUD (a NicheGraphics UI)

variants/esp32s3/tlora_t3s3_epaper/nicheGraphics.h

@@ -1,5 +1,6 @@
 #pragma once
 
+#include "FSCommon.h"
 #include "configuration.h"
 
 #ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
@@ -29,9 +30,8 @@ void setupNicheGraphics()
     // SPI
     // -----------------------------
 
-    // Display is connected to HSPI
-    SPIClass *hspi = new SPIClass(HSPI);
-    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+    // Display shares the HSPI bus with the SD card; reuse it rather than re-init the same host.
+    SPIClass *hspi = &SPI_HSPI;
 
     // E-Ink Driver
     // -----------------------------

variants/esp32s3/tlora_t3s3_epaper/platformio.ini

@@ -20,6 +20,8 @@ build_flags =
   -D TLORA_T3S3_EPAPER
   -I variants/esp32s3/tlora_t3s3_epaper
   -DUSE_EINK
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
   -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
@@ -39,6 +41,9 @@ extends = esp32s3_base, inkhud
 board = tlora-t3s3-v1
 board_check = true
 upload_protocol = esptool
+custom_sdkconfig =
+  ${esp32s3_base.custom_sdkconfig}
+  CONFIG_ESP_IPC_TASK_STACK_SIZE=2048 ; default 1024 overflows during NimBLE init off USB power
 build_src_filter =
   ${esp32s3_base.build_src_filter}
   ${inkhud.build_src_filter}
@@ -47,6 +52,8 @@ build_flags =
   ${inkhud.build_flags}
   -I variants/esp32s3/tlora_t3s3_epaper
   -D TLORA_T3S3_EPAPER
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_WEBSERVER=1
 lib_deps =
   ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
   ${esp32s3_base.lib_deps}