Merge branch 'master' into master

platformio.ini

@@ -30,10 +30,12 @@ build_flags = -Wno-missing-field-initializers -Isrc -Isrc/mesh -Isrc/gps -Ilib/n
   -DHW_VERSION_${sysenv.COUNTRY}
   -DAPP_VERSION=${sysenv.APP_VERSION}
   -DHW_VERSION=${sysenv.HW_VERSION}
+  -DUSE_THREAD_NAMES
 
 ; leave this commented out to avoid breaking Windows
 ;upload_port = /dev/ttyUSB0
 ;monitor_port = /dev/ttyUSB0
+
 ;upload_port = /dev/cu.SLAB_USBtoUART
 ;monitor_port = /dev/cu.SLAB_USBtoUART
 
@@ -57,15 +59,16 @@ debug_tool = jlink
 
 lib_deps =
   https://github.com/meshtastic/esp8266-oled-ssd1306.git ; ESP8266_SSD1306 
-  1260 ; OneButton library for non-blocking button debounce
+  https://github.com/geeksville/OneButton.git ; OneButton library for non-blocking button debounce
   1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
-  https://github.com/meshtastic/arduino-fsm.git 
-  https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git
-  https://github.com/meshtastic/RadioLib.git#ac7feac00f5e0bd95a3ac5d5852b4cc7344cf95c
+  https://github.com/meshtastic/arduino-fsm.git#2f106146071fc7bc620e1e8d4b88dc4e0266ce39
+  https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git#31015a55e630a2df77d9d714669c621a5bf355ad
+  https://github.com/meshtastic/RadioLib.git#8657380241bce681c33aab46598bbf13b11f876c
   https://github.com/meshtastic/TinyGPSPlus.git 
   https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
   Wire ; explicitly needed here because the AXP202 library forgets to add it
   SPI
+  https://github.com/geeksville/ArduinoThread.git#333ffd09b596977c217ba25da4258f588b462ac6
   
 ; Common settings for conventional (non Portduino) Ardino targets
 [arduino_base]
@@ -91,6 +94,9 @@ build_flags =
   ${arduino_base.build_flags} -Wall -Wextra -Isrc/esp32 -Isrc/esp32-mfix-esp32-psram-cache-issue -lnimble -std=c++11 
   -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
   -DAXP_DEBUG_PORT=Serial
+lib_deps =
+  ${arduino_base.lib_deps}
+  https://github.com/meshtastic/esp32_https_server.git
 # Hmm - this doesn't work yet
 # board_build.ldscript = linker/esp32.extram.bss.ld
 lib_ignore = segger_rtt
@@ -113,7 +119,7 @@ board_build.partitions = partition-table.csv
 extends = esp32_base
 board = ttgo-t-beam
 lib_deps =
-  ${arduino_base.lib_deps}
+  ${esp32_base.lib_deps}
 build_flags = 
   ${esp32_base.build_flags} -D TBEAM_V10
 
@@ -230,6 +236,15 @@ lib_deps =
   ${arduino_base.lib_deps}
   UC1701
 
+; The PPR board
+[env:ppr1]
+extends = nrf52_base
+board = ppr1
+build_flags = ${nrf52_base.build_flags} -Ivariants/ppr1
+src_filter = ${nrf52_base.src_filter} +<../variants/ppr1>
+lib_deps = 
+  ${arduino_base.lib_deps}
+
 ; Prototype eink/nrf52840/sx1262 device
 [env:eink]
 extends = nrf52_base
@@ -265,7 +280,30 @@ lib_deps =
   ${arduino_base.lib_deps}
   SparkFun BQ27441 LiPo Fuel Gauge Arduino Library
   TFT_eSPI
-  # Adafruit ST7735 and ST7789 Library
+
+; The https://github.com/BigCorvus/LoRa-BLE-Relay-v2 board by @BigCorvus
+[env:lora-relay-v2]
+extends = nrf52_base
+board = lora-relay-v2
+# add our variants files to the include and src paths
+# define build flags for the TFT_eSPI library
+build_flags = ${nrf52_base.build_flags} -Ivariants/lora_relay_v2
+  -DUSER_SETUP_LOADED
+  -DTFT_WIDTH=80
+  -DTFT_HEIGHT=160
+  -DST7735_GREENTAB160x80
+  -DST7735_DRIVER
+  -DTFT_CS=ST7735_CS
+  -DTFT_DC=ST7735_RS
+  -DTFT_RST=ST7735_RESET
+  -DSPI_FREQUENCY=27000000
+  -DTFT_WR=ST7735_SDA
+  -DTFT_SCLK=ST7735_SCK
+src_filter = ${nrf52_base.src_filter} +<../variants/lora_relay_v2>
+lib_deps = 
+  ${arduino_base.lib_deps}
+  SparkFun BQ27441 LiPo Fuel Gauge Arduino Library
+  TFT_eSPI
 
 ; The Portduino based sim environment on top of linux
 [env:linux]