kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 4 Packages Projects Releases Wiki Activity

增加mini模型

Browse Source
This commit is contained in:
kevin
2026-07-19 15:13:41 +08:00
parent 9237cf9012
commit fbbfcf072f
6 changed files with 273 additions and 41 deletions
Download Patch File Download Diff File Expand all files Collapse all files
variants/nrf52840/diy/moonshine_NRF52/variant.h
+6 -40
View File
@@ -111,21 +111,13 @@ MOONSHINE NRF52 PIN ASSIGNMENT (RF-BM-ND05)
#define LORA_CS (0 + 29) // P0.29
// LORA MODULES
#define USE_LLCC68
#define USE_SX1262
#define USE_RF95
#define USE_SX1268
#define USE_LR1121
#define USE_LR2021
#define USE_SX1268 // E22-400M33S uses SX1268 (433MHz)
// RF95 CONFIG
#define LORA_DIO0 (0 + 22) // P0.22 BUSY
#define LORA_DIO1 (0 + 21) // P0.21 IRQ
#define LORA_RESET (0 + 23) // P0.23 NRST
// RX/TX for RFM95/SX127x
#define RF95_RXEN (0 + 11) // P0.11
#define RF95_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
// E22-400M33S: 33dBm/2W module with ~25dB PA gain
// SX1268 outputs 8dBm -> PA -> 33dBm (2W)
// 22dBm default would overdrive PA to ~47dBm, causing current spikes and system reset
#define SX126X_MAX_POWER 8
#define TX_GAIN_LORA 25
// SX126X CONFIG
#define SX126X_CS (0 + 29) // P0.29 FIXME - we really should define LORA_CS instead
@@ -137,32 +129,6 @@ MOONSHINE NRF52 PIN ASSIGNMENT (RF-BM-ND05)
#define SX126X_RXEN (0 + 11) // P0.11
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
// LR1121
#ifdef USE_LR1121
#define LR1121_IRQ_PIN (0 + 21) // P0.21 IRQ
#define LR1121_NRESET_PIN LORA_RESET // P0.23 NRST
#define LR1121_BUSY_PIN (0 + 22) // P0.22 BUSY
#define LR1121_SPI_NSS_PIN LORA_CS // P0.29
#define LR1121_SPI_SCK_PIN LORA_SCK
#define LR1121_SPI_MOSI_PIN LORA_MOSI
#define LR1121_SPI_MISO_PIN LORA_MISO
#define LR11X0_DIO3_TCXO_VOLTAGE 1.8
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// LR2021
#ifdef USE_LR2021
#define LR2021_IRQ_PIN (0 + 21) // P0.21 IRQ
#define LR2021_NRESET_PIN LORA_RESET // P0.23 NRST
#define LR2021_BUSY_PIN (0 + 22) // P0.22 BUSY
#define LR2021_SPI_NSS_PIN LORA_CS // P0.29
#define LR2021_DIO3_TCXO_VOLTAGE 1.8
#define LR2021_DIO_AS_RF_SWITCH
#define LR2021_IRQ_DIO_NUM 9 // DIO9 -> P0.21
#endif
// #define SX126X_MAX_POWER 8 set this if using a high-power board!
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL