22072c5f4b106a338e59ffe3c13b8d026e737dac
27
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
   
|
22072c5f4b |
Pr1.5 tmm nexthop (#10745)
* TrafficManagement: flat unified cache + persistent next-hop overflow store Reworks the TrafficManagementModule cache layer (policing behaviour unchanged from upstream) and adds a routing-hint overflow store: - Flatten the ring: replace the cuckoo-hashed unified cache and the bucketed PSRAM NodeInfo index with plain flat arrays + linear scan (same idiom as WarmNodeStore). At LoRa packet rates an O(n) scan of the cache is negligible, and it removes a large amount of hashing/displacement complexity. The cache entry is 11 B; timestamps use a uniform +1 presence-offset so a 0 byte always means "empty" across every sub-store. Adds rebaseEpoch() so cached state survives the ~19 h relative-timestamp horizon instead of being flushed. - Next-hop overflow cache: setNextHop/getNextHopHint store a confirmed last-byte relay for a destination, written only from NextHopRouter's ACK-confirmed decision (and mirrored from TraceRoute). NextHopRouter::getNextHop falls back to this cache when the hot NodeDB has no hint, so DMs/relays to long-tail nodes keep routing after the node ages out of NodeInfoLite. - Persistence: preloadNextHopsFromNodeDB warm-starts the cache from persisted NodeInfoLite hints on first maintenance pass; next_hop entries are kept alive across the maintenance sweep (no TTL) and never clobbered by a stale preload. All packet-policing logic (rate limit, position dedup, unknown-packet drop, NodeInfo direct response, hop exhaustion) is the existing upstream behaviour, untouched. HAS_TRAFFIC_MANAGEMENT defaults on so the module is compiled in. (see note). Tests: upstream policing suite now actually runs (adds the MeshTypes.h include that gates HAS_TRAFFIC_MANAGEMENT) plus 4 next-hop tests. Role-aware throttles, politeness, precision clamp, port-interval and mesh-radius gating — and the rate-limit >255 saturation fix — are deferred to the advanced-TMM branch. Note: default dedup movement grid moves to ~91m, which also means 1.5km required to end up with the same signature position - coarser and therefore further than before. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * TrafficManagement: fix cppcheck constVariablePointer warning `node` in preloadNextHopsFromNodeDB() is never written through — mark it const to satisfy cppcheck's constVariablePointer check in CI. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Add multi-hop NextHop recovery tests and unit tests for routing reliability - Introduced a new test suite for multi-hop NextHop directed-message delivery and relay recovery in `test_nexthop_multihop_recovery.py`. This includes tests for end-to-end delivery and recovery after relay drop. - Implemented unit tests in `test_main.cpp` for NextHop routing reliability mitigations, covering: - M1: Ambiguity-aware last-byte resolution. - M2: NextHopRouter's strict-neighbor gate and hop limit checks. - M3: Route-health freshness and failure decay. - Enhanced mock classes to facilitate controlled testing of node behaviors and routing logic. * grafting fixed * Address Copilot review for PR #10735 (NextHop improvements) - docs/nexthop-routing-reliability.md: update status from "no code changes yet" to reflect that mitigations and tests are implemented RAM pressure and MIGRATION_VERBOSE concerns addressed upstream in PR2.5 (per-platform TRAFFIC_MANAGEMENT_CACHE_SIZE) and PR2 (verbose default=0) respectively; (0,0) sentinel fixed in PR2.5. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * CI: fix cppcheck constVariablePointer and test include path - NextHopRouter.cpp: qualify two RouteHealth *h locals as const — only read for stale-route checks, never mutated through the pointer - Router.cpp: qualify meshtastic_NodeInfoLite *node as const in shouldDecrementHopLimit — only read for favorite/role predicate - test_position_module/test_main.cpp: change bare PositionModule.h to modules/PositionModule.h — build_flags sets -Isrc, not -Isrc/modules, so the bare form fails to resolve in the native PlatformIO test env Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * WarmStore: cache device role + protected category in last_heard low bits Steal the low 6 bits of WarmNodeEntry.last_heard to carry an evicted node's device role (4 bits) and a protected category (2 bits) for the hop-trim path, at zero record-size cost (entry stays 40 B; no RAM/flash growth). The high bits remain a real unix-seconds timestamp, quantised to 64 s — ample for warm LRU ordering of long-tail nodes. - absorb() packs role/protectedCat; place()/ring replay store the raw word so metadata round-trips through flash. LRU compares masked time (warmTimeOf). - take() rehydration masks the metadata bits and restores the cached role so a re-admitted node isn't stuck at CLIENT until its next NodeInfo. - NodeDB classifies the category (favorite/ignored/verified -> Flag; tracker/sensor/tak_tracker -> Role) at each eviction site. - WarmNodeStore::lookupMeta() exposes role/category to consumers. - Bump WARM_RING_MAGIC (WRNG->WRN2): old rings read as erased and rebuild; warm data is a non-critical evictee cache, so discard-on-upgrade is safe. Tests: test_warm_store 11/11 (new meta round-trip + quantisation-aware ordering); NodeDB compiles (test_nodedb_blocked 4/4). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * WarmStore: migrate v1 rings/files by discarding last_heard, not the data Previously the WRNG->WRN2 magic bump treated old rings as erased, discarding all warm entries — including the PKI public keys that let evicted nodes keep decrypting DMs. Instead, read v1 (WRNG / WRM1) records and keep each node's identity + public key, discarding only last_heard (its low bits would otherwise be misread as the new role/protected metadata). Records re-rank and re-learn their role on next contact. - Ring backend (nRF52840): ringReadHeader accepts both magics and reports v1 via an out-param; replay zeroes last_heard for v1 records. If the active head page is v1, force a rotation so new v2 records never land in a v1-headered page (which would discard their freshly-set role on the next load). Legacy pages convert to v2 as the ring rotates. - File backend (warm.dat): bump WARM_STORE_MAGIC WRM1->WRM2; accept WRM1, verify CRC against the stored bytes, then discard last_heard and mark dirty so the next save rewrites as v2. Tests: test_warm_store 12/12 (adds test_ws_v1_migration_discardsLastHeard: key survives, role/protected reset). Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * WarmStore: guard role bit-width + test eviction carries role/protected - static_assert that the device role enum still fits the 4-bit warm metadata field (WARM_ROLE_MASK); fails the build loudly if a new role is added past 15 rather than silently truncating role on eviction. (Max role today = 12.) - Add test_migration_carriesRoleAndProtectedIntoWarm: a demoted TRACKER lands in the warm tier with its key, role=TRACKER and protected category=Role; a demoted CLIENT carries role=CLIENT/None. Exercises the NodeDB eviction path + warmProtectedCategory classification (the warm-store unit tests only cover absorb() directly). Tests: test_nodedb_blocked 5/5. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix copilot comments * fix(test): restore #if HAS_TRAFFIC_MANAGEMENT guard in TMM test The rebase onto PR1.5 lost the top-level HAS_TRAFFIC_MANAGEMENT guard that PR1.5 introduced, leaving the #else/#endif tail orphaned and causing compile errors on non-TMM builds. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
 
|
83a98c81f6 |
Hash table index for O(1) packet history lookups (#9499)
* Use hash table for O(1) lookup of recently seen packets * Eliminate a packet lookup during deduplication * Infinite loop checks for find and remove * Consolidate conditional compilation * Exclude hash table from minimal build * Additional comment on hash table capacity * Unit tests for packet history changes * Update incorrect comment about size clamp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Const --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben Meadors
|
e24db2994b | Merge remote-tracking branch 'origin/master' into develop | ||
|
Ben MeadorsandGitHub
|
d9e2b12097 |
Experiment: C++17 support (#9874)
* Add C++17 support * Add C++17 runtime probes and update build configurations for STM32 and Portduino * Remove unflags * Update C++ standard flags across the platforms * Convert a couple of instances to structured bindings * NRF52 platform.txt to add C++17 support * Still need the unflags apparently * Remove C++17 runtime probe tests from test_main.cpp * Reconfigured doesnt need a nodiscard * Remove nodiscard attribute from init() method in RadioInterface * Remove mbedtls/error.h from build flags Removed include directive for mbedtls/error.h from build flags. * Fix IRAM overflow * Fix IRAM overflow * Add build flag to exclude MQTT from rak11200 * Update C++ standard from gnu17 to gnu++17 |
||
|
016e68ec53 |
Traffic Management Module for packet forwarding logic (#9358)
* Add ESP32 Power Management lessons learned document Documents our experimentation with ESP-IDF DFS and why it doesn't work well for Meshtastic (RTOS locks, BLE locks, USB issues). Proposes simpler alternative: manual setCpuFrequencyMhz() control with explicit triggers for when to go fast vs slow. * Addition of traffic management module * Fixing compile issues, but may still need to update protobufs. * Fixing log2Floor in cuckoo hash function * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Adding station-g2 and portduino varients to be able to use this module. * Spoofing from address for nodeinfo cache * Changing name and behavior for zero_hop_telemetry / zero_hop_position * Name change for exhausting telemetry packets and setting hop_limit to 1 so it will be 0 when sent. * Updated hop logic, including exhaustRequested flag to bypass some checks later in the code. * Reducing memory on nrf52 nodes further to 12 bytes per entry, 12KB total using 8 bit hashes with 0.4% collision. Probably ok. Adding portduino to the platforms that don't need to worry about memory as much. * Fixing hopsAway for nodeinfo responses. * traffic_management.nodeinfo_direct_response_min_hops -> traffic_management.nodeinfo_direct_response_max_hops * Removing dry run mode * Updates to UnifiedCacheEntry to use a common cache, created defaults for some values, reduced a couple bytes per entry by using a resolution-scale time selection based on configuration value. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Creating consistent log messages * Remove docs/ESP32_Power_Management.md from traffic_module * Add unit tests for Traffic Management Module functionality * Fixing compile issues, but may still need to update protobufs. * Adding support for traffic management in PhoneAPI. * Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE. * Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants. * Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails. * Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit. * Add mock classes and unit tests for Traffic Management Module functionality. * Refactor setup and loop functions in test_main.cpp to include extern "C" linkage * Update comment to include reduced memory requirements Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Re-arranging comments for programmers with the attention span of less than 5 lines of code. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update comments in TrafficManagementModule to reflect changes in timestamp epoch handling and memory optimization details. * bug: Use node-wide config_ok_to_mqtt setting for cached NodeInfo replies. * Better way to handle clearing the ok_to_mqtt bit * Add bucketing to cuckoo hashing, allowing for 95% occupied rate before major eviction problems. * Extend nodeinfo cache for psram devices. * Refactor traffic management to make hop exhaustion packet-scoped. Nice catch. * Implement better position precision sanitization in TrafficManagementModule. * Added logic in TrafficManagementModule to invalidate stale traffic state. Also, added some tests to avoid future me from creating a regression here. * Fixing tests for native * Enhance TrafficManagementModule to improve NodeInfo response handling and position deduplication logic. Added tests to ensure local packets bypass transit filters and that NodeInfo requests correctly update the requester information in the cache. Updated deduplication checks to prevent dropping valid position packets under certain conditions. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
 JorropoandGitHub
|
beb268ff25 |
Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit
|
||
|
JorropoandGitHub
|
0d11331d18 | add a .clang-format file (#9154) | ||
 Eric SeveranceandBen Meadors
|
9058ccecf9 |
Calculate hops correctly even when hop_start==0 (#9120)
* Calculate hops correctly even when hop_start==0. * Use the same type (int8_t) in the loop, avoiding signed/unsigned mismatches. * Clarify defaultIfUnknown is returned for encrypted packets. |
||
|
Eric SeveranceandGitHub
|
1b2dc10e77 |
Calculate hops correctly even when hop_start==0 (#9120)
* Calculate hops correctly even when hop_start==0. * Use the same type (int8_t) in the loop, avoiding signed/unsigned mismatches. * Clarify defaultIfUnknown is returned for encrypted packets. |
||
 GUVWAFandGitHub
|
664d17c519 |
Revert "Revert "develop --> Master" (#8244)" (#8450)
This reverts commit
|
||
 Tom FifieldandGitHub
|
5bcc47dddb | Revert "develop --> Master" (#8244) | ||
 GUVWAF
|
f7cf5e6b0a | Change to "rebroadcast" | ||
|
GUVWAF
|
7c373b76c4 | Reprocess repeated packets also | ||
|
GUVWAF
|
de6a02756d | De-duplicate handling upgraded packet and rebroadcasting logic | ||
 Clive BlackledgeandBen Meadors
|
a1c658a467 |
Bug / Send upgraded (duplicate) packets to phone if the queue removal failed. (#8148)
* Add seenRecently = true if wasUpgraded is true but unable to remove from queue (i.e. already sent/processed). * Consistent comment between FloodingRouter and HopRouter |
||
|
Ben MeadorsandGitHub
|
a15d654767 |
Finish deprecating the Repeater role behavior (#8144)
* Finish deprecating the Repeater role behavior * Validate * Fixed bad if/else block * Get your crap together! |
||
|
GUVWAFandGitHub
|
aa876ba42f | Merge branch 'develop' into assymRelay | ||
|
3c25652cdf |
If a packet is heard multiple times, rebroadcast using the highest hop limit (#5534)
* If a packet is heard multiple times, rebroadcast using the highest hop limit Sometimes a packet will be in the TX queue waiting to be transmitted, when it is overheard being rebroadcast by another node, with a higher hop limit remaining. When this occurs, modify the pending packet in the TX queue to avoid unnecessarily wasting hops. * Reprocess instead of modifying queued packet In order to ensure that the traceroute module works correctly, rather than modifying the hop limnit of the existing queued version of the packet, simply drop it ifrom the queue and reprocess the version of the packet with the superior hop limit. * Update protobufs submodule * Merge upstream/develop into overheard-hoptimisation branch Resolved conflicts in: - src/mesh/FloodingRouter.cpp: Integrated hop limit optimization with refactored duplicate handling - src/mesh/MeshPacketQueue.h: Kept both hop_limit_lt parameter and new find() method * Improve method naming and code clarity - Rename findPacket() to getPacketFromQueue() for better clarity - Make code DRY by having find() use getPacketFromQueue() internally - Resolves method overloading conflict with clearer naming * If a packet is heard multiple times, rebroadcast using the highest hop limit Sometimes a packet will be in the TX queue waiting to be transmitted, when it is overheard being rebroadcast by another node, with a higher hop limit remaining. When this occurs, modify the pending packet in the TX queue to avoid unnecessarily wasting hops. * Improve router role checking using IS_ONE_OF macro - Replace multiple individual role checks with cleaner IS_ONE_OF macro - Add CLIENT_BASE support as suggested in PR #7992 - Include MeshTypes.h for IS_ONE_OF macro - Makes code more maintainable and consistent with other parts of codebase * Apply IS_ONE_OF improvement to NextHopRouter.cpp - Replace multiple individual role checks with cleaner IS_ONE_OF macro - Add CLIENT_BASE support for consistency - Include MeshTypes.h for IS_ONE_OF macro - Matches the pattern used in FloodingRouter.cpp * Create and apply IS_ROUTER_ROLE() macro across codebase - Add IS_ROUTER_ROLE() macro to meshUtils.h for consistent router role checking - Update FloodingRouter.cpp to use macro in multiple locations - Update NextHopRouter.cpp to use macro - Include CLIENT_BASE role support * Core Changes: - Add hop_limit field to PacketRecord (17B→20B due to alignment) - Extend wasSeenRecently() with wasUpgraded parameter - Enable router optimization without duplicate app delivery - Handle ROUTER_LATE delayed transmission properly Technical Details: - Memory overhead: ~4000 bytes for 1000 records - Prevents duplicate message delivery while enabling routing optimization - Maintains protocol integrity for ACK/NAK handling - Supports upgrade from hop_limit=0 to hop_limit>0 scenarios * Delete files accdentally added for merge * Trunk formatting * Packets are supposed to be unsigned. Thankfully, it's only a log message. * Upgrade all packets, not just 0 hop packets. * Not just unsigned, but hex. Updating packet log IDs. * Fixed order of operations issue that prevented packetrs from being removed from the queue * Fixing some bugs after testing. Only storing the maximum hop value in PacketRecord which makes sense. Also, updating messaging to make more sense in the logs. * Fixed flow logic about how to handle re-inserting duplicate packets. Removed IS_ROUTER_ROLE macro and replaced it with better isRebroadcaster(). * Add logic to re-run modules, but avoid re-sending to phone. * Refactor how to process the new packet with hops. Only update nodeDB and traceRouteModule. * - Apply changes to both FloodingRouter and NextHopRouter classes to make packets mutable for traceroute - MESHTASTIC_EXCLUDE_TRACEROUTE guard for when we don't want traceroute * Allow MeshPacket to be modified in-place in processUpgradePacket * let's not make a copy where a copy is unncessary. --------- Co-authored-by: Clive Blackledge <clive@ansible.org> Co-authored-by: Clive Blackledge <git@ansible.org> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben MeadorsandGitHub
|
9b3d76967b | Merge branch 'develop' into assymRelay | ||
|
Clive BlackledgeandGitHub
|
fd5ca8b73c |
Feat/0-cost hops for favorite routers (#7992)
* feat: implement router hop preservation for router-to-router communication - Preserve hop_limit when both local device and previous relay are routers/CLIENT_BASE - Only preserve hops for favorite routers to prevent abuse - Apply to both FloodingRouter and NextHopRouter - Update hop counting logic in MeshService for router-to-router communication This allows routers to communicate over longer distances without consuming hop limits, improving mesh network efficiency for infrastructure nodes. * chore: update protobufs submodule to latest * Optimized to check friend list first before nodedb. * Reverting unintended changes * revert: remove protobufs submodule update This reverts the protobufs submodule back to a84657c22 to remove unintended changes from this branch. * Slight rewrite to remove flawed NO_RELAY_NODE logic and added logic to add isFirstHop. If isFirstHop, always decrease hop_limit to avoid retry logic. * DRY code. Remove NodeInfo logic that was left over. * Trunk formatting |
||
|
GUVWAF
|
1fc07607cb | Make sure next-hop is only set when they received us directly | ||
 Mike Robbins
|
0fc33c352a | Fix memory leak in NextHopRouter: always free packet copy when removing from pending | ||
|
Mike Robbins
|
35340fc6e2 | NextHopRouter::roleAllowsCancelingFromTxQueue (same logic as FloodingRouter::roleAllowsCancelingDupe) | ||
|
GUVWAFandGitHub
|
4594ae474e | Upon receiving ACK/reply directly, only update next-hop if we’re the *sole* relayer (#7859) | ||
|
GUVWAFandBen Meadors
|
a25bfd264c |
Only stop retransmissions when receiving implicit ACK over LoRa (#7872)
* Only stop retransmissions when receiving implicit ACK over LoRa * trunk fmt |
||
|
|
8908805894 |
Don't cancel sending ReTx for relayer if we're ROUTER(_LATE)/REPEATER (#6904)
Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
+9     Ben MeadorsGitHubgithub-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>GUVWAFGUVWAFThomas GöttgensTom Fifieldmverch67Manueltodd-herbert Jason Murray Jason Murraydependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Jonathan Bennett Austin virgil Mark Trevor Birss Kalle Lilja rcarteraz |
99d3e5eb70 |
2.6 changes (#5806)
* 2.6 protos
* [create-pull-request] automated change (#5789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Hello world support for UDP broadcasts over the LAN on ESP32 (#5779)
* UDP local area network meshing on ESP32
* Logs
* Comment
* Update UdpMulticastThread.h
* Changes
* Only use router->send
* Make NodeDatabase (and file) independent of DeviceState (#5813)
* Make NodeDatabase (and file) independent of DeviceState
* 70
* Remove logging statement no longer needed
* Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772)
* File system persistence fixes
* [create-pull-request] automated change (#6000)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Update ref
* Back to 80
* [create-pull-request] automated change (#6002)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* 2.6 <- Next hop router (#6005)
* Initial version of NextHopRouter
* Set original hop limit in header flags
* Short-circuit to FloodingRouter for broadcasts
* If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter
* Set last byte to 0xFF if it ended at 0x00
As per an idea of @S5NC
* Also update next-hop based on received DM for us
* temp
* Add 1 retransmission for intermediate hops when using NextHopRouter
* Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback
* Update protos, store multiple relayers
* Remove next-hop update logic from NeighborInfoModule
* Fix retransmissions
* Improve ACKs for repeated packets and responses
* Stop retransmission even if there's not relay node
* Revert perhapsRebroadcast()
* Remove relayer if we cancel a transmission
* Better checking for fallback to flooding
* Fix newlines in traceroute print logs
* Stop retransmission for original packet
* Use relayID
* Also when want_ack is set, we should try to retransmit
* Fix cppcheck error
* Fix 'router' not in scope error
* Fix another cppcheck error
* Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK
Also check for broadcast in `getNextHop()`
* Formatting and correct NUM_RETRANSMISSIONS
* Update protos
* Start retransmissions in NextHopRouter if ReliableRouter didn't do it
* Handle repeated/fallback to flooding packets properly
First check if it's not still in the TxQueue
* Guard against clients setting `next_hop`/`relay_node`
* Don't cancel relay if we were the assigned next-hop
* Replies (e.g. tapback emoji) are also a valid confirmation of receipt
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
* fix "native" compiler errors/warnings NodeDB.h
* fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259)
* lib update: light theme
* fix merge issue
* lib update: home buttons + button try-fix
* lib update: icon color fix
* lib update: fix instability/crash on notification
* update lib: timezone
* timezone label
* lib update: fix set owner
* fix spiLock in RadioLibInterface
* add picomputer tft build
* picomputer build
* fix compiler error std::find()
* fix merge
* lib update: theme runtime config
* lib update: packet logger + T-Deck Plus
* lib update: mesh detector
* lib update: fix brightness & trackball crash
* try-fix less paranoia
* sensecap indicator updates
* lib update: indicator fix
* lib update: statistic & some fixes
* lib-update: other T-Deck touch driver
* use custom touch driver for Indicator
* lower tft task prio
* prepare LVGL ST7789 driver
* lib update: try-fix audio
* Drop received packets from self
* Additional decoded packet ignores
* Honor flip & color for Heltec T114 and T190 (#4786)
* Honor TFT_MESH color if defined for Heltec T114 or T190
* Temporary: point lib_deps at fork of Heltec's ST7789 library
For demo only, until ST7789 is merged
* Update lib_deps; tidy preprocessor logic
* Download debian files after firmware zip
* set title for protobufs bump PR (#4792)
* set title for version bump PR (#4791)
* Enable Dependabot
* chore: trunk fmt
* fix dependabot syntax (#4795)
* fix dependabot syntax
* Update dependabot.yml
* Update dependabot.yml
* Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797)
* Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800)
* Actions: Semgrep Images have moved from returntocorp to semgrep (#4774)
https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved!
Official Docker images for Semgrep now available at semgrep/semgrep."
Patch updates our CI workflow for these images.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump meshtestic from `31ee3d9` to `37245b3` (#4799)
Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`.
- [Commits](https://github.com/meshtastic/meshTestic/compare/31ee3d90c8bef61e835c3271be2c7cda8c4a5cc2...37245b3d612a9272f546bbb092837bafdad46bc2)
---
updated-dependencies:
- dependency-name: meshtestic
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* [create-pull-request] automated change (#4789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798)
Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4.
- [Release notes](https://github.com/pnpm/action-setup/releases)
- [Commits](https://github.com/pnpm/action-setup/compare/v2...v4)
---
updated-dependencies:
- dependency-name: pnpm/action-setup
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Raspberry Pico2 - needs protos
* Re-order doDeepSleep (#4802)
Make sure PMU sleep takes place before I2C ends
* [create-pull-request] automated change
* heltec-wireless-bridge
requires Proto PR first
* feat: trigger class update when protobufs are changed
* meshtastic/ is a test suite; protobufs/ contains protobufs;
* Update platform-native to pick up portduino crash fix (#4807)
* Hopefully extract and commit to meshtastic.github.io
* CI fixes
* [Board] DIY "t-energy-s3_e22" (#4782)
* New variant "t-energy-s3_e22"
- Lilygo T-Energy-S3
- NanoVHF "Mesh-v1.06-TTGO-T18" board
- Ebyte E22 Series
* add board_level = extra
* Update variant.h
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Consolidate variant build steps (#4806)
* poc: consolidate variant build steps
* use build-variant action
* only checkout once and clean up after run
* Revert "Consolidate variant build steps (#4806)" (#4816)
This reverts commit
|