* Add gpsd support to portduino
* copilot fixes
* emit gps config in emit_yaml
* Fix formating to standard
* Address coderabitai issues
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* Add Portduino Enable pins
* Add hat plus custom fields
* Punt on the GPIO device detection for now
* Simplify TX_GAIN_LORA for RAK13302
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add GPIO_DETECT_PA portduino config, and support 13302 detection with it.
* Tweak PA detect gpio to use pinMapping
* minor yaml output fixes
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
* Add support for setting API port from the config file
* Update PortduinoGlue.cpp
Fix typo in var identifier
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
* Start portduino_config refactor
* refactor GPIOs to new portduino_config
* More portduino_config work
* More conversion to portduino_config
* Finish portduino_config transition
* trunk
* yaml output work
* Simplify the GPIO config
* Trunk
* Add missed include
* Another Warning fix
* Add another HAS_SCREEN
* Namespace fixes
* Removed depricated destination types and re-factored destination screen
* Get rid of Arduino Strings
* Clean up after Copilot
* SixthLine Def, Screen Rename
Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment
* Consistency is hard - fixed "Sixth"
* System Frame Updates
Adjusted line construction to ensure we fit maximum content per screen.
* Fix up notifications
* Add a couple more ifdef HAS_SCREEN lines
* Add screen->isOverlayBannerShowing()
* Don't forget the invert!
* Adjust Nodelist Center Divider
Adjust Nodelist Center Divider
* Fix variable casting
* Fix entryText variable as empty before update to fix validation
* Altitude is int32_t
* Update PowerTelemetry to have correct data type
* Fix cppcheck warnings (#6945)
* Fix cppcheck warnings
* Adjust logic in Power.cpp for power sensor
---------
Co-authored-by: Jason P <applewiz@mac.com>
* More pixel wrangling so things line up NodeList edition
* Adjust NodeList alignments and plumb some background padding for a possible title fix
* Better alignment for banner notifications
* Move title into drawCommonHeader; initial screen tested
* Fonts make spacing items difficult
* Improved beeping booping and other buzzer based feedback (#6947)
* Improved beeping booping and other buzzer based feedback
* audible button feedback (#6949)
* Refactor
---------
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
* Sandpapered the corners of the notification popup
* Finalize drawCommonHeader migration
* Update Title of Favorite Node Screens
* Update node metric alignment on LoRa screen
* Update the border for popups to separate it from background
* Update PaxcounterModule.cpp with CommonHeader
* Update WiFi screen with CommonHeader and related data reflow
* It was not, in fact, pointing up
* Fix build on wismeshtap
* T-deck trackball debounce
* Fix uptime on Device Focused page to actually detail
* Update Sys screen for new uptime, add label to Freq/Chan on LoRa
* Don't display DOP any longer, make Uptime consistent
* Revert Uptime change on Favorites, Apply to Device Focused
* Label the satelite number to avoid confusion
* Boop boop boop boop
* Correct GPS positioning and string consistency across strings for GPS
* Fix GPS text alignment
* Enable canned messages by default
* Don't wake screen on new nodes
* Cannedmessage list emote support added
* Fn+e emote picker for freetext screen
* Actually block CannedInput actions while display is shown
* Add selection menu to bannerOverlay
* Off by one
* Move to unified text layouts and spacing
* Still my Fav without an "e"
* Fully remove EVENT_NODEDB_UPDATED
* Simply LoRa screen
* Make some char pointers const to fix compilation on native targets
* Update drawCompassNorth to include radius
* Fix warning
* button thread cleanup
* Pull OneButton handling from PowerFSM and add MUI switch (#6973)
* Trunk
* Onebutton Menu Support
* Add temporary clock icon
* Add gps location to fsi
* Banner message state reset
* Cast to char to satisfy compiler
* Better fast handling of input during banner
* Fix warning
* Derp
* oops
* Update ref
* Wire buzzer_mode
* remove legacy string->print()
* Only init screen if one found
* Unsigned Char
* More buttonThread cleaning
* screen.cpp button handling cleanup
* The Great Event Rename of 2025
* Fix the Radiomaster
* Missed trackball type change
* Remove unused function
* Make ButtonThread an InputBroker
* Coffee hadn't kicked in yet
* Add clock icon for Navigation Bar
* Restore clock screen definition code - whoops
* ExternalNotifications now observe inputBroker
* Clock rework (#6992)
* Move Clock bits into ClockRenderer space
* Rework clock into all device navigation
* T-Watch Actually Builds Different
* Compile fix
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Add AM/PM to Digital Clock
* Flip Seconds and AM/PM on Clock Display
* Tik-tok pixels are hard
* Fix builds on Thinknode M1
* Check for GPS and don't crash
* Don't endif til the end
* Rework the OneButton thread to be much less of a mess. (#6997)
* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily
* Update src/input/ButtonThread.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* fix GPS toggle
* Send the shutdown event, not just the kbchar
* Honor the back button in a notificaiton popup
* Draw the right size box for popup with options
* Try to un-break all the things
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* 24-hour Clock Should have leading zero, but not 12-hour
* Fixup some compile errors
* Add intRoutine to ButtonThread init, to get more responsive user button back
* Add Timezone picker
* Fix Warning
* Optionally set the initial selection for the chooser popup
* Make back buttons work in canned messages
* Drop the wrapper classes
* LonPressTime now configurable
* Clock Frame can not longer be blank; just add valid time
* Back buttons everywhere!
* Key Verification confirm banner
* Make Elecrow M* top button a back button
* Add settings saves
* EInk responsiveness fixes
* Linux Input Fixes
* Add Native Trackball/Joystick support, and move UserButton to Input
* No Flight Stick Mode
* Send input event
* Add Channel Utilization to Device Focused frame
* Don't shift screens when we draw new ones
* Add showOverlayBanner arguments to no-op
* trunk
* Default Native trackball to NC
* Fix crash in simulator mode
* Add longLong button press
* Get the args right
* Adjust Bluetooth Pairing Screen to account for bottom navigation.
* Trackball everywhere, and unPhone buttons
* Remap visionmaster secondary button to TB_UP
* Kill ScanAndSelect
* trunk
* No longer need the canned messages input filter
* All Canned All the time
* Fix stm32 compile error regarding inputBroker
* Unify tft lineheights (#7033)
* Create variable line heights based upon SCREEN_HEIGHT
* Refactor textPositions into method -> getTextPositions
* Update SharedUIDisplay.h
---------
Co-authored-by: Jason P <applewiz@mac.com>
* Adjust top distance for larger displays
* Adjust icon sizes for larger displays
* Fix Paxcounter compile errors after code updates
* Pixel wrangling to make larger screens fit better
* Alert frame has precedence over banner -- for now
* Unify on ALT_BUTTON
* Align AM/PM to the digit, not the segment on larger displays
* Move some global pin defines into configuration.h
* Scaffolding for BMM150 9-axis gyro
* Alt button behavior
* Don't add the blank GPS frames without HAS_GPS
* EVENT_NODEDB_UPDATED has been retired
* Clean out LOG_WARN messages from debugging
* Add dismiss message function
* Minor buttonThread cleanup
* Add BMM150 support
* Clean up last warning from dev
* Simplify bmm150 init return logic
* Add option to reply to messages
* Add minimal menu upon selecting home screen
* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp
* Properly dismiss message
* T-Deck Trackball press is not user button
* Add select on favorite frame to launch cannedMessage DM
* Minor wording change
* Less capital letters
* Fix empty message check, time isn't reliable
* drop dead code
* Make UIRenderer a static class instead of namespace
* Fix the select on favorite
* Check if message is empty early and then 'return'
* Add kb_found, and show the option to launch freetype if appropriate
* Ignore impossible touchscreen touches
* Auto scroll fix
* Move linebreak after "from" for banners to maximize screen usage.
* Center "No messages to show" on Message frame
* Start consolidating buzzer behavior
* Fixed signed / unsigned warning
* Cast second parameter of max() to make some targets happy
* Cast kbchar to (char) to make arduino string happy
* Shorten the notice of "No messages"
* Add buzzer mode chooser
* Add regionPicker to Lora icon
* Reduce line spacing and reorder Position screen to resolve overlapping issues
* Update message titles, fix GPS icons, add Back options
* Leftover boops
* Remove chirp
* Make the region selection dismissable when a region is already set
* Add read-aloud functionality on messages w/ esp8266sam
* "Last Heard" is a better label
* tweak the beep
* 5 options
* properly tear down freetext upon cancel
* de-convelute canned messages just a bit
* Correct height of Mail icon in navigation bar
* Remove unused warning
* Consolidate time methods into TimeFormatters
* Oops
* Change LoRa Picker Cancel to Back
* Tweak selection characters on Banner
* Message render not scrolling on 5th line
* More fixes for message scrolling
* Remove the safety next on text overflow - we found that root cause
* Add pin definitions to fix compilation for obscure target
* Don't let the touchscreen send unitialized kbchar values
* Make virtual KB just a bit quicker
* No more double tap, swipe!
* Left is left, and Right is right
* Update horizontal lightning bolt design
* Move from solid to dashed separator for Message Frame
* Single emote feature fix
* Manually sort overlapping elements for now
* Freetext and clearer choices
* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)
* Remove BaseUI branding
* Capitalization is fun
* Revert Meshtastic Boot Frame Changes
* Add ANZ_433 LoRa region to picker
* Update settings.json
---------
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add std::string exec() function to PortduinoGlue for future work
* MVP for HostMetrics module.
* Fix compilation for other targets
* Remove extra debug calls
* Big numbers don't do well as INTs.
* Add HostMetrics to config.yaml
* For each GPIO PIN, allow to specify gpiochip and line
* Added support for LLCC68 in native env.
* Removed one if by employing &&
* Fix for log, as std::string and not const char*
* Remove CH341 flag, enabling it for all LoRa chips
* Provide a default example
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Selection of minor edits from the TFT branch that are too
challenging to cherry-pick cleanly, including:
* introducing the HAS_TFT flag
* fixing pins in unphone
* Adding pinterdevice to portduino settings
* Very hacky first attempt at usermod ech341
* Fixes and debug printfs
* Move to library version of libpinedio-usb
* Add spidev: ch341 option in meshtasticd config.yaml
* Only check settingsStrings on native
* Use new CH341 code
* Bump ch341 lib
* Cleanup USBHal
* Add ch341 config.d files
* Remove ch341quirk
* Bump to most recent spi-userspace driver
* Add handling for ch341 serial, pid, and vid
* Minor fixes from pio check
* Trunk
* Add include for musl compliance
* Point to upstream libch341
* Add MACAddress to config.yaml
* Better error handling on native, including failing to launch with blank MAC Address and real hardware.
* Re-arrange Mac Address handling and add MACAddressSource
* Bump portduino to remove macaddr function there
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add support for loading yaml from a config directory
* Add waveshare hats to the new config.d approach
* Move to available.d for module inactive module configs
* Adds ASCII logs useful to portudino
Activates ASCII log option when stdout is not a terminal. This is
generally the right thing to do; if not, the behavior can be
overridden in config.yaml using AsciiLogs under Logging. The result
is reasonable system logs for portudino when running under systemd or
the like.
Signed-off-by: Christopher Hoover <ch@murgatroid.com>
* Make SPI frequency configurable on Native
* Make the tophone queue size configurable for Portduino
* The modified SPISettings must be configured in setup(), after config.yaml is processed
* make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time
* Got a little over excited with refactoring
* Silence a warning
* Macro to trace log all MeshPackets as JSON
* Comment
* Add trace logging to file for native target
* bytes to hex
* Add time_ms
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
This seems to fix the ch341 quirk where large packets fail to send. As it can be problematic for other radios, we gate it behind "ch341_quirk" in the config.
* Add better support for the Adafruit PiTFT 2.8 for Native
* native: Make touch i2c address configurable
* Bump portduino to pick up I2C features
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This changeset gives us the ability to specify a separate SPI device for the LoRa, Display, and Touchscreen. The changes in Portduino also add support for specifying a new SPI speed for each transaction. All together, this means that we can let the Linux OS manage the CS lines, and also get much faster SPI speeds, leading to better framerates.
* Add multiple SPI devices to put Radio, Display, and Touchscreen on each their own
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add MaxNodes to Native
* It compiles...
* Convert nodedb to use new
* Closer but still broken.
* Finally working
* Remove unintended lines
* Don't include a pointer
* Capitalization matters.
* avoid rename in protocol regen
* When trimming the nodeDB, start with a cleanup
* Remove extra cleanupMeshDB() call for now
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Thomas GöttgensandGitHub
JorropoandGitHub
Tom FifieldandGitHub
Mark Trevor BirssandGitHub
Christopher HooverandGitHub
