Since #10967 made Router::sendLocal handle self-addressed packets
synchronously, the entire phone-API chain for a BLE client runs inline in
the Bluefruit characteristic write callback: toRadioWriteCb ->
PhoneAPI::handleToRadio -> admin set-config -> radio reconfigure ->
NodeDB::saveToDisk. That callback executes on the Bluefruit BLE FreeRTOS
task, whose stock stack is 5 KB (CFG_BLE_TASK_STACKSIZE = 256*5 words) -
not the Arduino loop task that #10944 already raised to 8 KB. The loop-task
fix therefore protects the wrong task for BLE-originated writes.
On a Seeed Wio Tracker L1 the 5 KB stack overflows during pairing
first-sync, resetting the device mid-LittleFS-write, every single time.
Repeated mid-write resets tear the LittleFS metadata, lfs_assert fires on
the next boot, and the corruption handler formats the whole filesystem:
region, channels, module config, and the node's keypair are all lost
(critical fault #13, new node identity on next region set). Reproduced
end-to-end tonight on stock develop 6908d27; with this change the same
device pairs, serves config screens, and survives back-to-back
config.proto saves over BLE.
Raise the BLE task to the same 2048 words (8 KB) as LOOP_STACK_SZ, for the
same reason. bluefruit.cpp's #ifndef guard makes the -D take effect with no
framework patch. Costs 3 KB of RAM on nrf52840 targets only.
Credit where due: Ixitxachitl independently established in #11155 testing
that the save-path crash persists after #11185 and that re-queueing
sendLocal (moving the pipeline back to the Router thread) makes it go away
- which corroborates this diagnosis from the other direction. This commit
is the minimal capacity-side fix; #11155's relocation of the pipeline off
the BLE task remains the right architectural follow-up, and this guard
stays correct even after it lands.
Likely also explains #10905 (L1 display-thread crash when a client
requests full configuration) and the 2.8 field reports of idle nodes
losing region and keys after a BLE session.
* Add RAK WisMesh Pod variant and fix Tag LPCOMP wake on user shutdown
* chore: trunk fmt - replace Unicode em-dash in Pod comment
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(esp32): skip RTC timer wake on user shutdown
Do not arm esp_sleep_enable_timer_wakeup when msecToWake is portMAX_DELAY (UI shutdown), matching nRF52 system_off semantics.
fix(rak_wismesh_tap_v2): Tag OCV curve and 16MB partition
Add OCV_ARRAY matching WisMesh Tag for accurate SOC. Use 16MB flash partition scheme for TAP V2 hardware.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Trunkt
* Add RAK WisMesh Repeater Mini V2 and HP variants
Introduce rak_wismesh_repeater_mini (RAK4631) and
rak_wismesh_repeater_mini_hp (RAK3401) with low-VDD System OFF.
Skip LPCOMP battery wake on user-initiated shutdown to avoid
immediate reboot near the LPCOMP threshold; keep LPCOMP for
brownout-driven shutdown via variant_enableBatteryLpcompWake.
* docs(variants): update RAK BOM numbers for Repeater Mini V2 & HP
* chore: run trunk fmt
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Add conditional compilation guards for LR1121 and LR2021 radio chip configurations in rfswitch.h to prevent compilation errors when these radios are not in use. Move USE_LR2021 definition to the radio section in variant.h for consistency with other radio chip definitions.
The Arduino loop task runs Meshtastic's entire cooperative OSThread
scheduler on the Adafruit core's stock 4 KB (1024-word) stack. The 2.8
first-sync path - AdminModule::handleSetConfig -> saveChanges ->
configChanged -> RadioInterface::reloadConfig -> LR11x0 reconfigure ->
SPI Lock::lock, with vsnprintf/USB-CDC logging frames stacked on top -
overflows it.
SWD fault capture on a T1000-E (pyocd vector_catch=h) proved it: the
loop task's SP was driven 40 bytes BELOW its own pxStack base, the
stack paint was consumed to the floor, and the crash was a BusFault in
xQueueSemaphoreTake dereferencing a semaphore handle that adjacent-heap
corruption had overwritten with log text (0x3f3f207c = "| ??"). The
core's HardFault handler is a bare NVIC_SystemReset, so in the field
this presents as a silent reboot ~seconds after a phone pairs (or a 30 s
zombie hang -> supervision timeout 0x8 when the corruption lands on task
TCBs instead). Also explains the set_time_only -> immediate-NodeInfo
crash variant reported on empty-DB nodes: same task, different deep
chain. 2.7.26 is unaffected because the deep frames (XEdDSA, satellite
map conversion, replay engine) did not exist.
Fix: set -DLOOP_STACK_SZ=2048 (words = 8 KB) for all nrf52840 targets.
Requires the #ifndef guard from meshtastic/Adafruit_nRF52_Arduino#7;
until that merges the flag is a harmless redefinition warning. Validated
on hardware: pairing + full sync completes, stack paint shows healthy
margin under load.
Also fix the boot-time reset-reason log: the core's init() caches
RESETREAS and W1C-clears the register before setup() runs, so the raw
read here has always printed 0. Use readResetReason() instead.
(preFSBegin's RESETREAS==0 gate is intentionally left as-is - its
degenerate GPREGRET-only behavior is what makes lfs recovery work.)
isCharging()/getHasUSB() were hard-compiled to always return false on
this board: the nrfx_power_usbstatus_get() block in Power.cpp that
derives them is gated behind #ifdef NRF_APM, and this board's variant.h
never defined it - unlike tracker-t1000-e and wio-tracker-wm1110, which
do. Confirmed on hardware: before this change, `Battery: usbPower=0,
isCharging=0` regardless of actual USB/charge state; after, `usbPower=1,
isCharging=1` while genuinely on USB power with a battery attached.
Same underlying gap as #4367, fixed for tracker-t1000-e and
wio-tracker-wm1110 in #4376 (which also fixed a deeper bug where
PowerStatus notifications were gated behind a battery-level null check -
that part is already fixed generically in Power.cpp today, so this board
only needed the define). Looks like a simple oversight from when this
board was added, since it's newer than the two boards #4376 touched.
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
Every other .cpp/.h pair in src/ (350 of 351) uses identical
capitalization between the two files. Power.cpp/power.h was the sole
outlier; this aligns it with the rest of the codebase. No functional
change — all includes already resolved this file the same way on
case-sensitive filesystems.
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Right-size nRF52 heap tiers after 2.8.0 heap-exhaustion field reports
Field reports on 2.8.0 show nRF52840 devices at 99% heap (114/115 KB)
within minutes of boot; operator new asserts on OOM, so these devices
are one allocation from a reboot. The 2.8.0 cache sizing ladders gave
nRF52 the largest non-PSRAM tiers on the assumption that a BLE-only
part has a roomy heap - the arena is actually ~125 KB shared with the
FreeRTOS task stacks.
Per-target retiers (nRF52840 unless noted):
- Traffic Management cache 1000 -> 250 entries (10 KB -> 2.5 KB); the
unclassified fallthrough drops 1000 -> 400 to match the classic-ESP32
tier (also affects RP2040/RP2350)
- Warm node store 200 -> 100 entries (8 KB -> 4 KB); the non-XXAA
fallthrough drops 320 -> 100 so an unclassified RAM-constrained part
can't boot-allocate 12.8 KB
- MESSAGE_HISTORY_LIMIT 20 -> 10 (text pool 4.4 KB -> 2.2 KB), the tier
classic ESP32 already ships
- MAX_RX_TOPHONE 32 -> 16, shrinking the static packet pool 70 -> 54
slots (~6.6 KB of .bss returned to the heap arena)
- PacketHistory hash index off arch-wide (1 KB); O(n) over 240 records
is negligible at LoRa packet rates
- OLEDDISPLAY_REDUCE_MEMORY arch-wide (~1 KB OLED back buffer); the five
TFT variants -U it because TFTDisplay.cpp needs buffer_back for
dirty-window diffing
- Drop the stale "for testing" 1024-entry TMM override on T1000-E
Measured on rak4631: heap arena grows 124,572 -> 131,180 B and boot
allocations drop ~15.7 KB, roughly +22 KB free heap on the field-report
device class.
Migration: the nRF52840 warm flash ring replays through place() (LRU),
so the newest 100 identities survive the shrink; the file backend
rejects oversized snapshots cleanly (new test covers this). Native
suites pass (536/536 Docker, 13/13 native-macos warm store); rak4631,
heltec-mesh-node-t114 (TFT) and tracker-t1000-e build green.
* Add central memory-class ladder (MemClass.h) with fail-safe-small defaults
The 2.8.0 nRF52840 heap exhaustion happened because each RAM-sized cache
picked its per-platform tier from its own chip #ifdef ladder, and every
ladder's fallthrough default was its largest non-PSRAM tier - nRF52 was
never named, so it silently got 1000-entry caches on a ~115 KB arena.
This introduces src/memory/MemClass.h: a single MESHTASTIC_MEM_CLASS
(TINY / SMALL / MEDIUM / LARGE) ranked by usable app heap after platform
overheads, with the deliberate property that an unclassified chip lands
in SMALL - a new target boots with small caches until someone opts it up
in one visible place.
The TMM cache, warm store, MAX_RX_TOPHONE and MAX_SATELLITE_NODES
ladders in mesh-pb-constants.h now key off the class; branches pinned by
something other than RAM stay explicit and say why (nRF52840's SoftDevice
arena, RP2040's warm.dat watchdog bound). MAX_NUM_NODES intentionally
stays separate - it is flash-shaped (nodes.proto vs LittleFS), not
heap-shaped.
A per-class MESHTASTIC_BOOT_CACHE_BUDGET static_assert now covers the
three big boot-allocated caches, so the next cache-adding PR that would
blow a small platform's budget fails to compile instead of exhausting
heap in the field.
No values change for any existing target: rak4631, tbeam, rak11310 and
wio-e5 build byte-identical before/after; all ladders remain
#ifndef-guarded so variant overrides keep working.
* Address review: fix RP2350 class-table doc, add PacketRecord static_assert
- MemClass.h's class table claimed RP2350 was MEDIUM while the mapping
ladder classifies it SMALL (with RP2040) - the table now matches the
ladder, with a note that RP2350 is a MEDIUM candidate whenever someone
wants to tune it up (kept SMALL here so this header stays a behavioral
no-op).
- The boot-cache budget comment referenced a static_assert pinning
PacketHistory::PacketRecord at 20 B that did not exist (only a layout
comment). Add the real static_assert so the budget math in
mesh-pb-constants.h fails to compile if the record layout changes.
Also merges develop (the base #10898 landed there as a squash, which is
what made this stacked branch conflict); develop's mesh-pb-constants.h
is byte-identical to this branch's base, so the resolution keeps the
MemClass ladder unchanged. rak4631 and wio-e5 build green;
test_packet_history 47/47.
* Address review: share PACKETHISTORY_MAX, trim policy comments
- Hoist PACKETHISTORY_MAX from PacketHistory.cpp into
mesh-pb-constants.h (next to the MAX_NUM_NODES it derives from) so the
constructor clamp and the boot-cache budget static_assert use one
definition instead of hand-mirrored arithmetic that could drift. The
expression stays valid where MAX_NUM_NODES resolves at runtime
(ESP32-S3, portduino); the pointless 2.0 double math becomes integer.
- Trim the MemClass.h header (36 -> 16 comment lines) and the budget /
sizing-policy comments per the repo comment-length guideline, keeping
the class table, the fail-safe-small rule, the override mechanism, and
the include-order constraint.
rak4631 (compile-time MAX_NUM_NODES) and heltec-v3 (runtime) build
green; test_packet_history 47/47.
* Right-size nRF52 heap tiers after 2.8.0 heap-exhaustion field reports
Field reports on 2.8.0 show nRF52840 devices at 99% heap (114/115 KB)
within minutes of boot; operator new asserts on OOM, so these devices
are one allocation from a reboot. The 2.8.0 cache sizing ladders gave
nRF52 the largest non-PSRAM tiers on the assumption that a BLE-only
part has a roomy heap - the arena is actually ~125 KB shared with the
FreeRTOS task stacks.
Per-target retiers (nRF52840 unless noted):
- Traffic Management cache 1000 -> 250 entries (10 KB -> 2.5 KB); the
unclassified fallthrough drops 1000 -> 400 to match the classic-ESP32
tier (also affects RP2040/RP2350)
- Warm node store 200 -> 100 entries (8 KB -> 4 KB); the non-XXAA
fallthrough drops 320 -> 100 so an unclassified RAM-constrained part
can't boot-allocate 12.8 KB
- MESSAGE_HISTORY_LIMIT 20 -> 10 (text pool 4.4 KB -> 2.2 KB), the tier
classic ESP32 already ships
- MAX_RX_TOPHONE 32 -> 16, shrinking the static packet pool 70 -> 54
slots (~6.6 KB of .bss returned to the heap arena)
- PacketHistory hash index off arch-wide (1 KB); O(n) over 240 records
is negligible at LoRa packet rates
- OLEDDISPLAY_REDUCE_MEMORY arch-wide (~1 KB OLED back buffer); the five
TFT variants -U it because TFTDisplay.cpp needs buffer_back for
dirty-window diffing
- Drop the stale "for testing" 1024-entry TMM override on T1000-E
Measured on rak4631: heap arena grows 124,572 -> 131,180 B and boot
allocations drop ~15.7 KB, roughly +22 KB free heap on the field-report
device class.
Migration: the nRF52840 warm flash ring replays through place() (LRU),
so the newest 100 identities survive the shrink; the file backend
rejects oversized snapshots cleanly (new test covers this). Native
suites pass (536/536 Docker, 13/13 native-macos warm store); rak4631,
heltec-mesh-node-t114 (TFT) and tracker-t1000-e build green.
* Drop stale OLEDDISPLAY_REDUCE_MEMORY -U on t114 / mesh-solar-tft
Only USE_TFTDISPLAY variants (t1, t096, wismeshtap) compile
TFTDisplay.cpp and need the lib's buffer_back; t114 and mesh-solar-tft
render through the meshtastic-st7789 driver, which handles the
reduced-memory configuration fine - as #10894 (merged from develop)
already established by defining the flag there. Remove the -U guard and
the per-variant -D (redundant with the arch-wide define in nrf52_base
on this branch). Both variants verified building.
Audit of the XEdDSA packet-signing implementation (#10478) surfaced several
issues in when unsigned packets are accepted on receive or emitted on send.
This fixes them and adds regression coverage.
- Unicast NodeInfo exchange no longer breaks against signer nodes: the
NodeInfoModule downgrade drop is gated to broadcasts, since senders never
sign unicast (want_response replies, directed exchanges).
- Replace the payload-size sign heuristic with an exact encoded-size gate
(signedDataFits) and mirror it on the receive side, removing a dead band
where 167-168 B broadcasts were signed then failed TOO_LARGE.
- Extract the receive policy into checkXeddsaReceivePolicy() and apply it to
plaintext-MQTT decoded downlink, which previously skipped signature
verification and downgrade protection entirely.
- Reject signatures whose length is neither 0 nor 64 as malformed, so a
crafted partial signature can't inflate the size estimate and dodge the
unsigned-downgrade drop.
- Hold cryptLock on the MQTT verify path (shared Ed25519 key cache).
- Clear any client-preset signature on packets we originate, on all builds.
- Randomized (hedged) signing per the Signal XEdDSA spec: bump the
meshtastic/Crypto pin to the build where XEdDSA::sign mixes 32 bytes of
caller randomness into the nonce as Z (meshtastic/Crypto#3), and seed those
bytes in xeddsa_sign from HardwareRNG (checked, with a seeded-CSPRNG
fallback). test_crypto pins that repeated signs differ and both verify.
Adds test coverage: test_packet_signing groups A-E (receive matrix, send
policy, NodeInfo backstop, encoding invariants, decoded-ingress policy),
test_mqtt end-to-end downlink cases, and a test_crypto randomization check.
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* Seeed Tracker X1 Support
* silence CPPCheck
* fix macro order regression and adapt stm32hal for new radiolib
* STM32 is a radiolib upstream fix ( https://github.com/jgromes/RadioLib/issues/1825 )
* fix STM32 regression
* address copilot OCD
* Split behavior only when the two LEDs are on distinct pins.
* bring naming in line with the other seeed devices
* update env name to fit convention too
* guarantee evaluation order
* Guard sensor readings against null values, make sensor use less power
Reconciles develop to master's latest renovate values for deps bumped on the
2.7 line but never back-merged, so the develop->master 2.8 promotion (#10777)
doesn't regress them. Done as a value reconcile, not a cherry-pick: several
master commits are superseded (5 device-ui bumps, 2 ststm32 bumps), and
develop's stale archive/refs/tags/ URL form actually blocked renovate from
bumping these (the regex expects archive/<version>.zip).
GitHub Actions:
- actions/checkout v6 -> v7 (35 refs)
- actions/cache v5 -> v6
- actions/github-script v8 -> v9 (3 refs)
- actions/stale v10.2.0 -> v10.3.0
Build / platform:
- alpine 3.23 -> 3.24 (alpine.Dockerfile)
- platformio/ststm32 19.5.0 -> 19.7.0
- platformio/nordicnrf52 10.11.0 -> 10.12.0
Libraries:
- Adafruit SSD1306 2.5.16 -> 2.5.17
- SparkFun MMC5983MA v1.1.4 -> v1.1.5
- Sensirion I2C SCD30 1.0.0 -> 1.1.1
- meshtastic esp8266-oled-ssd1306 6bfd1f1 -> 2e26010
Deliberately excluded:
- meshtastic/device-ui digest: coupled to firmware protobuf/API and develop has
diverged hard (NodeDB v25); left for a separate maintainer bump + visual check.
- libpax: develop uses the mverch67 fork (pinned by Arduino-3.x migration #9122),
master uses dbinfrago -- a fork divergence, not a version bump; not reconciled.
- platform-native digest: develop already at 61067ac (equal to master).
* NodeDB: 3-tier node store with persistent warm tier (long-tail identity retention)
Introduces a tiered NodeDB so the device retains identity (public key,
last_heard) for far more nodes than fit in the full-record hot store,
without growing heap or the persisted nodes.proto unboundedly.
- Hot store: full NodeInfoLite, MAX_NUM_NODES (120 on nRF52).
- Satellite maps: position/telemetry/environment/status capped at
MAX_SATELLITE_NODES (40 freshest); eviction via enforceSatelliteCaps /
evictSatelliteOverCap.
- Warm tier (WarmNodeStore): 40 B {num,last_heard,public_key} records for
evicted nodes so DMs to/from long-tail nodes keep encrypting/decrypting.
Persisted to /prefs/warm.dat, or on nRF52840 a dedicated 12 KB raw-flash
record-ring below LittleFS (3x4 KB pages; see linker scripts + the
nrf52_warm_region.py post-link guard).
NodeDB::getOrCreateMeshNode now demotes evicted nodes into the warm tier and
re-admits them (restoring key/last_heard). Router PKI decrypt/encode resolve
the peer key via NodeDB::copyPublicKey (hot store, then warm tier).
NodeInfoLite gains snr_q4 (sint32, Q4-encoded dB); the float snr is zeroed on
disk. NodeInfoLite grows 105 -> 112 B; backup 2432 -> 2468 B.
Note: the snr_q4 .proto change still needs to land in the protobufs submodule
(generated header is updated here; submodule pointer left at upstream).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* NodeDB: robust receive + retention for blocked (ignored) nodes
Hardens how ignored/favourite nodes are received over admin and retained,
closing paths where a block could be lost or accidentally cleared.
- Blocking keeps the node's public key (admin set_ignored_node and
addFromContact no longer zero it / drop the warm-tier key), so a blocked
peer stays a verifiable identity.
- set_ignored_node creates the node if absent, so a block by node ID sticks
even for a node we've never heard from (e.g. pushed by a remote admin) with
no NodeInfo or key.
- Eviction protection (favourite/ignored/manually-verified) now also applies to
the load-time hot-store migration and is never undone by cleanupMeshDB, which
previously purged ignored nodes that lacked user info.
- The hot-store migration leaves our own node (index 0) in place and prefers to
demote non-protected nodes, like the runtime eviction scan.
Caps the protected set (favourite + ignored + verified) at MAX_NUM_NODES-2 via
NodeDB::setProtectedFlag(), so at least two evictable slots always remain and
getOrCreateMeshNode can always make room — replacing the previous unconditional
append that could run off the end of the node vector when every node was
protected. A locally-set favourite/ignore that hits the cap reports back to the
phone via a ClientNotification.
Adds test_nodedb_blocked covering the migration, favourite/ignored eviction
protection, ignored-survives-cleanup, and the protected-node cap. The
maintenance methods stay private in production; the test reaches them through a
PIO_UNIT_TESTING-guarded friend shim.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
# Conflicts:
# src/mesh/NodeDB.h
* fix copilot comments
* once again
* WarmNodeStore: fix cppcheck warnings (uninitvar, constVariablePointer)
Zero-initialise `stranded[]` and `seqs[]/order[]` VLAs so cppcheck can
verify there are no unguarded reads of uninitialised memory (the guards
exist but are not visible to static analysis). Mark two local pointers
`const` where the pointed-to entry is never mutated after assignment.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* self-care added to assist 2.7 and 2.8 nodedb migration
* Tidy warm-store/self-care: comments, guards, log + flash cleanup
Style/cleanup pass over the branch (no behavior change except the noted
preprocessor simplifications, which are semantically identical):
- Comments: move function descriptions to the headers, cap in-function
comments at ~3-4 lines, drop leading-number step markers, label stacked
#endif blocks, de-decorate banner comments.
- dumpToLog: fully gate decl + definition + AdminModule call site behind
MESHTASTIC_NODEDB_MIGRATION_VERBOSE so it compiles out when disabled
(~1.2 KB when off).
- mesh-pb-constants: drop the dead nRF52832 WARM_NODE_COUNT branch and trim
the macro docs.
- WarmNodeStore: simplify the redundant `ARCH_NRF52 && NRF52840_XXAA` guards
to `NRF52840_XXAA`, add a kNoPage sentinel for the ring page state.
- Shorten the always-on LOG_WARN strings (~120 B flash).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* more tidying up, aligning with docs and undoing other-arch regressions
* Update protobufs (#19)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* made the migration pathway cleareer
* address copilot review
* fixed a copilot review on a downstream PR.
* Address Copilot review comments for PR #10705 (warmstore/nodedb)
- WarmNodeStore.h: default MIGRATION_VERBOSE to 0 (suppress info-level
chatter on production builds; opt in with =1)
- WarmNodeStore.cpp load(): move memset to top of function so all
failure paths (header-read fail, invalid header) leave entries clear
- WarmNodeStore.cpp save(): replace manual spiLock lock/unlock around
mkdir with LockGuard covering the full SafeFile sequence, matching
the lock discipline in load()
- Router.cpp: memcpy(&p->public_key.bytes, ...) -> memcpy(p->public_key.bytes,
...) — pass decayed uint8_t* rather than pointer-to-array
- AdminModule.cpp: check setProtectedFlag return for PKC auto-favorite;
log cap-refusal warning instead of unconditional "auto-favoriting"
- nrf52_warm_region.py: error message references both v6.ld and v7.ld
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* NodeDB: formatting cleanup (blank lines after preprocessor blocks)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Lukewarm store
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fixes
* Remove BATTERY_LPCOMP_THRESHOLD
BATTERY_LPCOMP_THRESHOLD is dead code — in main-nrf52.cpp it's inside #ifdef BATTERY_LPCOMP_INPUT, which this board intentionally doesn't define. The threshold value is never reached.
* Trunk fix
* Update MotionSensor.cpp
* fix
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Use standard GPS enable pin, for smarter power control on M3
* Enable GPS pin in variant.cpp initialization
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Test commit for XEdDSA support
* Update to Crypto lib in Meshtatic org
* Generate a new node identity on key generation (#7628)
* Generate a new node identity on key generation
* Fixes
* Fixes
* Fixes
* Messed up
* Fixes
* Update src/modules/AdminModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Figured it out!
* Cleanup
* Update src/mesh/NodeDB.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/mesh/NodeDB.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/AdminModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update crypto commit hash
* Some fixes for xeddsa pr (#9610)
* fix: add null check for getMeshNode() in NodeInfoModule
getMeshNode() can return nullptr for unknown nodes. Dereferencing
without a check crashes the firmware when receiving NodeInfo from
a node not yet in the database.
* fix: enforce XEdDSA signature verification and prevent stripping
Previously, failed signature verification still allowed the packet
through, making signatures purely cosmetic. Now:
- Failed verification drops the packet (DECODE_FAILURE)
- Successfully verified nodes get HAS_XEDDSA_SIGNED bitfield set
- Unsigned packets from previously-signing nodes are rejected
- Log levels reduced from WARN/ERROR to DEBUG/WARN as appropriate
* fix: include packet metadata in XEdDSA signature
The signature now covers [fromNode | packetId | portnum | payload]
instead of just the payload bytes. This prevents:
- Replay attacks (different packetId fails verification)
- Reattribution (different fromNode fails verification)
- Portnum redirection (different portnum fails verification)
Also adds a key initialization check to xeddsa_sign (returns false
if XEdDSA keys are all zeros) and checks the return value in the
encode path.
* fix: handle existing key pair in AdminModule security config
When a user provides both a valid private key and public key via
admin config, the crypto engine's DH private key and owner public
key were never loaded. DMs and XEdDSA signing would silently break.
Add an else branch to load both keys into the crypto engine.
* perf: cache Ed25519 public key conversion in xeddsa_verify
curve_to_ed_pub() performs field element parsing, inversion, and
multiplication on every call. Since packets from the same node
tend to arrive in bursts, a single-entry cache avoids repeating
this expensive conversion for consecutive packets from one sender.
* fix: skip identity cleanup when node number is unchanged
createNewIdentity() was called on every generateCryptoKeyPair(),
including normal boots where the same key is regenerated. This
caused unnecessary NodeDB writes and old-node cleanup logic to
run when the node number hadn't actually changed.
Also fixes only zeroing byte[0] of the old node's public key
instead of clearing the entire array.
* fix: replace hardcoded 120 with derived XEDDSA_SIGNATURE_SIZE constant
The payload size check for XEdDSA signing used a magic number (120).
Replace with a derivation from DATA_PAYLOAD_LEN and XEDDSA_SIGNATURE_SIZE
so the limit adjusts automatically if constants change. This also
increases the max signable payload from 120 to 169 bytes, which is
still safe since the actual encoded size is checked after pb_encode.
* fix: add const qualifiers to XEdDSA verify and curve_to_ed_pub inputs
pubKey, payload, and signature parameters in xeddsa_verify are
input-only and should not be modified. Same for curve_pubkey in
curve_to_ed_pub.
* chore: remove commented-out old Crypto dependency in portduino.ini
* Leave out the admin module change for now
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* trunk
* protobuf re-update
* Protobufs
* Merge resolution fix
* Put XEDDSA on the right bit
* NodeDB update to new nodeInfoLite accessors, etc
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* Refine unsigned packet rejection logic in Router (#10534)
* use hardware random to fill the first 32 signature bytes with entropy prior to signing.
* Add XEdDSA packet-signing policy tests and update dependencies for macos
* Minor fixes
* integrate XEdDSA support and update dependencies across multiple modules
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Wessel <github@weebl.me>
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Add LTO support for nrf52840 while preserving interrupt handlers
* nrf52840: enable whole-image LTO on all targets via nrf52_base
Moves -flto + the nrf52_lto.py exclusion middleware from the rak4631 env
(771018ca8) up to [nrf52_base], so every nrf52840 target inherits it.
nrf52_lto.py keeps the interrupt handlers out of LTO (framework core +
TinyUSB USBD_IRQHandler) -- they're referenced only from the asm vector
table, so whole-program LTO would otherwise drop them and the chip hangs.
HW-validated: RAK4631 (SX1262, -60KB) and muzi-base (LR1121) both boot and
init their radios. Build-verified on canaryone (fresh board, base-inherited).
Caveat: the RAK "1-Watt" variant's radio does not tolerate global-LTO
(SX126x init fails); it shares the rak4631 binary, so keep that hardware on
src-only or split it into a separate target.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* nrf52840: move -fmerge-all-constants to nrf52_base (all targets)
It had been trialed on rak4631 only; it's a general image-wide flag (the
same one stm32 uses globally, ~0.7KB), so move it up to [nrf52_base] next
to -flto so every nrf52840 target gets it instead of just rak4631.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* nrf52_lto.py: normalize path separators for Windows (Copilot review)
get_abspath() returns backslash-separated paths on Windows, so the
"/FrameworkArduino/" / "/cores/nRF5/" substring matches would miss and the
ISR-owning objects would still be LTO'd -> hang on first IRQ. Replace
backslashes with forward slashes before matching. No-op on macOS/Linux.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Fix directory handling for LTO
* Add post-link guard to check for dropped ISR handlers in nrf52 LTO
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: Jason P <applewiz@mac.com>
* add noise floor
* Sliding window noise floor
* Add getCurrentRSSI() to SimRadio for noise floor support
* Remove sendLocalStatsToPhone call from runOnce
* Change noise floor to int32_t type
* Use int32_t for RSSI sample storage in noise floor
* Remove float cast from noise floor assignment
* Fix Copilot review issues: fix noise floor logic, types, and null pointer
- Use robust busyTx/busyRx checks instead of simple isReceiving check
- Initialize noiseFloorSamples to NOISE_FLOOR_MIN instead of 0
- Move noise_floor assignment inside null check to prevent potential crash
- Change getNoiseFloor() and getAverageNoiseFloor() to return int32_t
- Fix RSSI validation to check for positive values (rssi > 0)
- Fix format specifier from %.1f to %d for int32_t
- Update comments to accurately reflect the sampling logic
* Fix RSSI condition to include zero value
* Change noise floor initialization to zero
* Disable noise floor for LR11x0 chips: getRSSI(bool) unsupported
* Remove updateNoiseFloor call from onNotify to avoid radio queue overflow
Per PR review feedback, calling updateNoiseFloor() in onNotify() for every
ISR event (ISR_TX, ISR_RX, TRANSMIT_DELAY_COMPLETED) can cause the LoRa
radio queue to get full. The noise floor sampling still happens in
startReceive() and after transmitting.
* fix lr11x0 current rssi
* Address noise floor review comments
* Address Copilot SimRadio noise floor comments
* Fix RadioLibInterface formatting
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
kevin
吴文峰andGitHub
Ben MeadorsandGitHub
renovate[bot]andGitHub
AustinandGitHub
Thomas GöttgensandGitHub
IrisandGitHub
Andrew YongandGitHub
HarukiToredaandGitHub
TomandGitHub
Jonathan BennettandGitHub
Quency-DandGitHub
Benjamin FaershteinandGitHub
