5f734dabf9d641c4556d54b4aea6fc1a7aa6aced
28
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  
|
1eb860a3fc |
fix(stm32wl,nrf52,fs): flash hardening, FS platform unification, write-behind LFS cache (FORMAT BREAK) (#10171)
* stm32wl: check HAL_FLASH_Unlock() return in _internal_flash_erase _internal_flash_prog already checks HAL_FLASH_Unlock() and returns LFS_ERR_IO on failure. _internal_flash_erase discarded the return value, proceeding to erase even if the flash was not unlocked. Apply the same check for consistency and safety. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl: fix _internal_flash_prog to abort on first write error Previously the programming loop continued to the next doubleword after HAL_FLASH_Program() failed, potentially writing to invalid addresses and returning a misleading error code only at the end (last iteration). HAL_FLASH_Lock() was also skipped on the mid-loop early return path. - Move bounds check before the loop (validate full range at once) - Break on first HAL error so subsequent doublewords are not written - Move HAL_FLASH_Lock() after the loop so it always runs Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl: clear stale flash SR error flags before erase and program Stale error flags in FLASH->SR from a previous failed operation can cause HAL_FLASH_Program() or HAL_FLASHEx_Erase() to return HAL_ERROR immediately without attempting the operation. Add __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS) after each HAL_FLASH_Unlock() in both _internal_flash_prog and _internal_flash_erase to ensure a clean state before each operation. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl: reject flash prog writes not aligned to 8-byte doubleword The STM32WL HAL minimum write unit is one 64-bit doubleword (8 bytes). _internal_flash_prog silently truncated any trailing bytes when size % 8 != 0 because dw_count = size / 8 drops the remainder. Return LFS_ERR_INVAL early so LittleFS sees the error rather than a silent short write. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(nrf52,fs): use atomic SafeFile rename instead of direct write NRF52 was bypassing the .tmp/readback/rename path entirely — openFile() deleted the target file and wrote directly to it, and close() returned true without verifying the write or renaming anything. Adafruit_LittleFS::rename() calls lfs_rename() directly (confirmed at Adafruit_LittleFS.cpp:205). Remove both ARCH_NRF52 guards so NRF52 follows the same write-to-.tmp → readback-hash → rename path used by all other platforms. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(admin): skip uiconfig.proto save on devices without a screen handleStoreDeviceUIConfig() was writing /prefs/uiconfig.proto unconditionally. MenuHandler.cpp is already gated behind #if HAS_SCREEN, so there is no path that populates UI config on screen-less platforms. Guard the save with #if HAS_SCREEN to avoid wasting a flash block on devices that will never use it. The read path (handleGetDeviceUIConfig) does not touch the filesystem and needs no change. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * fs: enable format-on-retry for all platforms in saveToDisk The FSCom.format() call on save failure was guarded to ARCH_NRF52 with a comment that other platforms were not ready (bug #4184). STM32WL was added to the guard in a prior commit. All platforms now expose format semantics and the retry logic is identical — remove the guard. To keep NodeDB.cpp platform-agnostic and fix a CI failure on native-tft (portduino's fs::FS has no format() method), introduce fsFormat() in FSCommon as the single call-site for all callers: - Embedded (ESP32, NRF52, STM32WL, RP2040): delegates to FSCom.format() - Portduino: rmDir("/prefs") + FSBegin() (a no-op on portduino). rmDir("/prefs") is already called unconditionally by factoryReset() (NodeDB.cpp:504), so both primitives are proven on portduino. Replace both direct FSCom.format() calls in NodeDB.cpp with fsFormat(). Note: we do not run portduino locally — portduino/native build testers please verify the format-on-retry path. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * DO NOT MERGE: nrf52(fs): add File() default constructor bound to InternalFS Adds File() to the Adafruit LittleFS File class (in the Meshtastic Adafruit_nRF52_Arduino fork), delegating to File(InternalFS). This matches the default-constructible File API on all other platforms. The constructor is implemented in Adafruit_LittleFS_File.cpp rather than inline in the header to avoid a circular include between Adafruit_LittleFS_File.h and InternalFileSystem.h. FOLLOW-UP REQUIRED: nrf52.ini points to a commit SHA on the mesh-malaysia/Adafruit_nRF52_Arduino fork instead of the upstream meshtastic framework. Once meshtastic/Adafruit_nRF52_Arduino#5 is merged, revert nrf52.ini to point back to the upstream meshtastic framework URL. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl(fs): add File() default constructor and document LFS tunables Adds File() to STM32_LittleFS_Namespace::File, delegating to File(InternalFS). Implemented in the .cpp to avoid a circular include between STM32_LittleFS_File.h (which cannot include LittleFS.h) and the InternalFS extern declaration. This matches the File API on ESP32/RP2040/Portduino and is a prerequisite for removing the ARCH_STM32WL guard in xmodem.h. No behavior change — the constructor leaves the file in the same closed/unattached state as File(InternalFS) would. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * fs: remove arch-specific ifdefs from FSCommon, SafeFile, xmodem Now that NRF52 and STM32WL have File() default constructors and NRF52 has working atomic SafeFile rename, the capability gaps are closed. Remove all per-arch guards across the shared FS layer: FSCommon.cpp — renameFile(): Use FSCom.rename() on all platforms. Adafruit_LittleFS::rename() calls lfs_rename() directly (Adafruit_LittleFS.cpp:205). The copy+delete fallback on NRF52/RP2040 was never necessary. FSCommon.cpp — getFiles(): Replace four ARCH_ESP32 guards with a single filepath pointer at the top of the loop (file.path() on ESP32, file.name() elsewhere). Fix strcpy(fileInfo.file_name, filepath): bounded to sizeof(fileInfo.file_name)-1 with explicit NUL termination to prevent overflow of the 228-byte meshtastic_FileInfo::file_name array. FSCommon.cpp — listDir(): Same filepath pointer approach. NRF52/STM32WL were in an else-branch that only logged but never deleted — now all platforms follow the unified del path. 12 guards → 2. Fix three strncpy(buffer, ..., sizeof(buffer)) calls that did not NUL-terminate when source length >= sizeof(buffer) (255 bytes). Add explicit buffer[sizeof(buffer)-1] = '\0' after each. FSCommon.cpp — rmDir(): Use listDir(del=true) everywhere. The ARCH_NRF52 rmdir_r() path and the ARCH_ESP32|RP2040|PORTDUINO listDir() path collapse to one line. SafeFile.cpp: ARCH_NRF52 bypass removed (handled in preceding commit). xmodem.h: File file; now works on all platforms via default constructors added in the two preceding commits. Remaining #ifdef ARCH_ESP32 in FSCommon.cpp: exactly 4, all for the file.path() vs file.name() API difference (ESP32 Arduino LittleFS returns the full path; all others return only the name). That difference lives in the framework and cannot be closed here. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl(fs): add write-behind page cache, reduce virtual block size and FS reservation (FORMAT BREAK) Adds a write-behind (RMW) page cache to the STM32WL LittleFS driver, modelled after the NRF52 Adafruit approach (flash_cache.c). This allows LFS to use 256-byte virtual blocks backed by 2048-byte physical pages: the erase/prog callbacks accumulate changes in a 2 KB RAM buffer; the sync callback (and page eviction on page-change) flushes with a single HAL physical-erase + doubleword-program pass. LFS tunables changed (FORMAT BREAK — superblock parameters): block_size: 2048 B → 256 B (8 virtual blocks per physical page) read_size: 2048 B → 256 B (= block_size) prog_size: 2048 B → 256 B (= block_size; hardware min is 8 B) block_count: 112 → 80 (14 phys pages → 10 phys pages = 20 KiB) Benefits: - Internal fragmentation: max 2047 B/file → max 255 B/file - Heap per open LFS file: ~4 KB → 512 B (prog + read buffers) - Code flash headroom: 6.7 KB → ~14.1 KB (+7.4 KB) - Block budget: 80 virtual blocks, worst-case peak ~20, ~60 free Updates board_upload.maximum_size in wio-e5/platformio.ini from 233472 (256 KB − 28 KB) to 241664 (256 KB − 20 KB) to match the reduced FS reservation. Justification for the format break: the prior STM32WL firmware had several flash write bugs fixed earlier in this series (missing error flag clearing, no abort on first write failure, unaligned write acceptance). These bugs very likely caused silent config corruption on deployed devices. The format break should be treated as an enhancement: it provides a clean, reliably-written starting point. Users will need to reconfigure their device once after this update. Correctness fixes applied to the cache implementation: - alignas(8) on _page_cache: the buffer was uint8_t[] (alignment 1) but _flash_cache_flush casts it to const uint64_t* — undefined behaviour per C++ standard, potential Cortex-M hardfault. alignas(8) guarantees the required alignment for the doubleword cast. - HAL_FLASH_Lock() return value: was discarded. Now assigned to lock_rc and propagated into rc if prior writes succeeded, so LFS sees the error rather than a false success. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> * stm32wl(fs): reduce FS reservation from 10 pages to 7 pages (FORMAT BREAK) Reduces LFS_FLASH_TOTAL_SIZE from 10 × 2 KiB pages (20 KiB) to 7 × 2 KiB pages (14 KiB), freeing 6 KiB for firmware. board_upload.maximum_size updated accordingly across all STM32WL variants: 241664 (256 KiB - 20 KiB) → 247808 (256 KiB - 14 KiB) This is a FORMAT BREAK: existing filesystems must be erased before use. Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> * fix(fs): return false in renameFile() when FSCom is not defined Avoids undefined behavior and -Wreturn-type warnings in configurations that compile FSCommon.cpp without a filesystem backend. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
fe90c49795 |
fix/feat(stm32/russell): Serial2 build fix and BME680 support (#10097)
* fix(stm32/russell): define ENABLE_HWSERIAL2 and Serial2 pins The Russell board variant was missed during Initial serialModule cleanup (PR #9465), which began requiring Serial2 to be explicitly defined via ENABLE_HWSERIAL2 and PIN_SERIAL2_TX/RX rather than relying on implicit defaults, causing a build error. Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(stm32/russell): add BME680 support, exclude modules to fit flash The BME680 is hardware footprint compatible with the BME280 already present on the Russell board, so add it as an additional lib dep to enable environment sensing (temperature, humidity, pressure, gas resistance). The STM32 target has very limited flash. Even traceroute alone causes overflow, so the following modules are excluded to stay within budget: - RANGETEST - DETECTIONSENSOR - EXTERNALNOTIFICATION - POWERSTRESS - NEIGHBORINFO - TRACEROUTE - WAYPOINT AIR_QUALITY_SENSOR is also excluded as it requires the BSEC2 library for real IAQ output, which alone overflows flash by ~44KB on this target. The Adafruit BME680 library is used instead for raw sensor readings. Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
  Chloe BethelandChloe Bethel
|
31418ca821 |
stm32wl: reserve 2KB of stack via linker script to match NRF52, change sbrkHeadroom to use the start of the reserved stack region instead of the current stack pointer
The linker script was created by merging variants/STM32WLxx/WL54JCI_WL55JCI_WLE4J(8-B-C)I_WLE5J(8-B-C)I/ldscript.ld and system/ldscript.ld from stm32duino/Arduino_Core_STM32. |
||
|
Andrew YongandChloe Bethel
|
0ee5777c15 |
stm32wl(mem): fix getFreeHeap() underreporting on dynamic sbrk heap
mallinfo().fordblks counts only free bytes within the committed arena. On STM32WL (newlib sbrk heap) the arena grows lazily from _end toward SP, so fordblks reads near-zero at early boot even when ~48 KB of addressable space remains. This caused NodeDB::isFull() to fire prematurely and evict nodes on a freshly booted device. Fix getFreeHeap() to include uncommitted sbrk headroom (SP - sbrk(0)) so the returned value reflects true available memory throughout the boot lifecycle. Introduce MESHTASTIC_DYNAMIC_SBRK_HEAP as an opt-in build flag (set in stm32.ini) so the fix is gated to platforms with a dynamic sbrk heap rather than a static heap. Future platforms with the same heap model can opt in by adding this flag. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
Andrew YongandGitHub
|
026213aab7 |
feat(stm32): Add STM32 ADC support to AnalogBatteryLevel (#9369)
Integrate STM32 battery monitoring into AnalogBatteryLevel, supporting external GPIO ADC pins as well as internal VBAT channel. Features: - ADC reading using STM32 LL (Lower Layer) macros supporting external ADC channels and internal VBAT channel (AVBAT) - ADC compensation using STM32 LL macros with factory-calibrated VREFINT (AVREF) for accurate voltage measurement - LFP battery OCV curve for STM32WL using AVBAT (STM32 VDD absolute maximum supply voltage 3.9V, direct connection of Li-Po batteries is not supported) Internal VBAT channel implemented in: - Russell - RAK3172 In these variants, ADC_MULTIPLIER = (1.01f * 3) = 3.30 as there is a 3:1 internal divider (DS13105 Rev 12 §5.3.21), and a bit of tolerance as the actual 10% spec leads to readings much too high. Assisted-by: Claude:sonnet-4-5 Signed-off-by: Andrew Yong <me@ndoo.sg> |
||
 Tom FifieldandGitHub
|
4587dc2d64 |
Add RADIOLIB_EXCLUDE_LR2021 in places that excluded LR11x0 (#10112)
To save resources, some devices where LR11x0 was never an option excluded it from compilation, using RADIOLIB_EXCLUDE_LR11X0 . As we will soon have LR2021 support, apply the same treatment to that chip to these devices, by adding RADIOLIB_EXCLUDE_LR2021 |
||
|
Chloe BethelandGitHub
|
33e7f16c05 | Supporting STM32WL is like squeezing blood from a stone (#10015) | ||
  |
1e16185fdd |
chore(deps): update platformio/ststm32 to v19.5.0 (#9764)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> |
||
+19        Ben MeadorsJonathan BennettJason PEric SesterhennVortettyMattatat25CopilotMaxColby DillionAustin Tomgithub-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>Chloe Bethel Thomas Göttgens Quency-D HarukiToreda oscgonfer nikl Hannes Fuchs Nashui-YanTom Fifield Mike Robbins WillyJLrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Wessel Christian Walther Jorropo Eric Barch Clive Blackledge |
4c91beeda9 |
Develop to master (#9618)
* Don't ever define PIN_LED or BLE_LED_INVERTED (#9494) * Don't ever define PIN_LED * Deprecate BLE_LED_INVERTED * Add StatusMessage module and config overrides (#9351) * Add StatusMessage module and config overrides * Trunk * Don't reboot node simply for a StatusMessage config update * Missed in reviews - fixing send bubble (#9505) * Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511) * Make sure we always return a value in NodeDB::restorePreferences() (#9516) In case FScom is not defined there is no return statement. This moves the return outside of the ifdef to make sure a defined value is returned. * Inkhud battery icon improvements. (#9513) * Inkhud battery icon improvements. Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices. * Remove option for icon mirroring * Add border + dither to battery to prevent font overlap * Fix trunk format * Code cleanup, courtesy of Xaositek. * Add reply bot module with DM-only responses and rate limiting (#9456) * Implement Meshtastic reply bot module with ping and status features Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes. * Update ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.h Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Tidying up --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532) * Undefine LED_BUILTIN (#9531) Keep variant in sync with https://github.com/meshtastic/firmware/commit/df40085 Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add agc reset attempt (#8163) * Add agc reset attempt * Add radioLibInterface include * Trunk * AGC reset don't crash, don't naively call * Update src/main.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use Throttle function --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove unused hmx variable (#9529) The variable is not used at all in the function, remove it to silence the compiler warning. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512) * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module * Misc * Remove errant endif * Fix hop_limit upgrade detection (#9550) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * meshtasticd: Fix install on Fedora 43 (#9556) * RPM: Include meshtasticd-start.sh (#9561) * Add Slash Key to VirtualKeyboard (#9563) Addition of ? and / to the virtual Keyboard via short and long press * Add support for CW2015 LiPo battery fuel gauge (#9564) * Add support for CW2015 LiPo battery fuel gauge * Address Copilot's concerns, minor fixups * Make LED_POWER blip even in critical battery (#9545) * Enable FORTIFY and SP for native builds (#9537) * Enable FORITFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and SP for native builds meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update built-in documentation for current method of implementation (#9592) * Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536) * Automated version bumps (#9604) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add missing openocd_target to custom nrf52 boards (#9603) This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil. * Add sdl libs for native builds (#9595) * Add sdl libs for native builds * Alpine try again * fix some random compiler warnings (#9596) * Modify the dependency library of v4-tft (#9507) * BaseUI: Favorite Screen Signal Quality improvement (#9566) * Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com> * ExternalNotification and StatusLED now call AmbientLighting to update… (#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats * Fixes on SCD4X admin comands (#9607) * Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat/add sfa30 (#9372) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Add SFA30 with new sensor template in AQ module * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Final SFA30 class implementation * Add HCHO to screen and improve logs * Add metrics to mesh packet serializer * Minor fixes in logs * OCD tidy up of logs * Fix sleep function * Remove old I2C_CLOCK_SPEED code --------- Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614) * Exclude status message module * fix: zero entire public key array instead of only first byte (#9619) * Update protobufs (#9621) * Xiao NRF - define suitable i2c pins for the sub-variants (#8866) Co-authored-by: Christian Walther <cwalther@gmx.ch> * Update src/detect/ScanI2C.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/mesh/NodeDB.cpp Co-authored-by: Wessel <wessel@weebl.me> * convert GPS global and some new in gps.cpp to unique_ptr (#9628) Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr. I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std. * replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642) Is part of the unique_ptr modernization effort. * replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643) Is part of the unique_ptr modernization effort. * Undefine LED_BUILTIN for Heltec v2 variant (#9647) * Undefine LED_BUILTIN for Heltec v2 variant * Undefine LED_BUILTIN for Heltec v2.1 variant --------- Co-authored-by: Jorropo <jorropo.pgm@gmail.com> * replace delete in RadioInterface.cpp with std::unique_ptr (#9645) Is part of the unique_ptr modernization effort. * fix typo in PIN_GPS_SWITCH (#9648) Wasn't caught by CI. * replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649) Is part of the unique_ptr modernization effort. * workaround NCP5623 and LP5562 I2C builds (#9652) Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import. Idk why other platforms using the same smart LEDs are working while theses ones don't. This should make CI green on the dev branch. * replace delete in AudioThread.h with std::unique_ptr (#9651) Is part of the unique_ptr modernization effort. * Add USB_MODE=1 for Station G2 (#9660) * InkHUD: Favorite Map Applet (#9654) * fix a lot of low level cppcheck warnings (#9623) * simplify the observer pattern, since all the called functions are const getters. * use arduino macro over std: for numerical values and refactor local variables in drawScrollbar() * oh, so Cppcheck actually complained about const pointers not being const. * slowly getting out of ifdef hell * fix inkHUD warnings as well * last 2 check warnings * git checks should fail on low defects from now on * Feat/add scd30 (#9609) * Merge develop into SCD30 * Add SCD30 class * Fix logging and admin commands * Minor cleanup and logging improvements * Minor formatting issue Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Improvements on setTemperature * Fix casting float-uint16_t * Pass 100 for resetting temperature offset * Fix issues pointed out by copilot * Add quick reboot to set interval quicker on scd30 * Change saveState to only happen after boot and minor log changes * Fix missing semicolon in one shot mode log --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * fix: respect DontMqttMeBro flag regardless of channel PSK (#9626) The previous PSK check was broken from its introduction in #4643 — memcmp was used in boolean context without comparing to 0, inverting the condition. Since no one noticed for over a year, the PSK-based filtering provided no practical value. Simplifying to always respect the sender's preference is both more correct and easier to reason about. * our firmware action is too clever Update pio_target and add pio_opts for checks. * fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664) * fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct fix signedness warning in PMSA003 sensor code. * Add alternate path for LPS22HB Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * check EndTransmission for errors and compare returned length to expected value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * #9623 resolved a local shadow of next_key by converting it to int. (#9665) * zip a few gitrefs down (#9672) * InkHUD: Allow non-system applets to subscribe to input events (#9514) * Allow inkhud user applets to consume inputs with opt-in system Adds a way for applets to subscribe to input events while keeping it off by default to preserve compatibility and expected behaviours. Adds example for use as well. * Add check for nullptr on getActiveApplet uses * Remove redundant includes * Move subscribedInputs to protected * More consistent naming scheme * Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663) * BSEC2 Replacement - add approximation for IAQ to non-BSEC2 platforms. - Re-add this sensor to ESP32 targets, and refactor env_extra includes. - Fix C++ 11 compatibility * Check for gas resistance 0 * ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685) --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de> Co-authored-by: Vortetty <33466216+Vortetty@users.noreply.github.com> Co-authored-by: Mattatat25 <108779801+mattatat25@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Max <rekin.m@gmail.com> Co-authored-by: Colby Dillion <colby.dillion@pacshealth.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Chloe Bethel <chloe@9net.org> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: oscgonfer <oscgonfer@users.noreply.github.com> Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Wessel <wessel@weebl.me> Co-authored-by: Christian Walther <cwalther@gmx.ch> Co-authored-by: Jorropo <jorropo.pgm@gmail.com> Co-authored-by: Eric Barch <ericb@ericbarch.com> Co-authored-by: Clive Blackledge <clive@ansible.org> |
||
+1 oscgonferGitHubHannes FuchsNashui-YanBen MeadorsTom FifieldMike Robbinsgithub-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>thebenternWillyJLrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com> |
7cbab4838c |
Feat/add sen5x (#7245)
* Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Fix trunk * Fix on condition in reclock * Add check on polling interval of sen5x --------- Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> |
||
|
Jonathan BennettandGitHub
|
dbded86dcb | More variant.h cleanup. LED_NOTIFICATION, remove dead code, etc (#9477) | ||
|
|
1f7ed6888a |
feat(stm32): Add Milesight GS301 Bathroom Odor Detector (#9359)
- STM32WLE5CCU6 - NFC (unsupported): NXP NT3H2211W0FTTJ (NTAG I2C plus: NFC Forum T2T with I2C interface, password protection and energy harvesting) - Sensor (unsupported): Analog ADuCM355 (SHTC3 is connected to ADuCM355 and not directly accessible) - Bicolor LED - User button (presently not functional in STM32 variants) The definitions for sensor voltage control are present but commented out to save power, due to lack of sensor support. Powered by 4x 4000mAh RAMWAY ER18505 Li-SOCl2 batteries. Flashing: 1. Power down device (remove batteries) 2. Connect USB-UART to J1 (USART2), pinout is below, do not connect +3V3 pin yet 3. Short BOOT pins next to J1 4. Connect +3V3 pin or insert batteries while BOOT pins are shorted 5. Use STM32CubeProgrammer, connect by UART mode 6. Load firmware .hex and download J1 (USART2); Molex Picoblade (P=1.25mm * 4) 1. +3V3 2. PA3_USART2_RX_J1 3. PA2_USART2_TX_J1 4. GND Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Jonathan BennettandGitHub
|
4fd0a8276b |
Just set LED_BUILTIN universally to -1, as we don't use it. (#8830)
* Just set LED_BUILTIN universally to -1, as we don't use it. * LUD_BUILTIN workarounds * Squash the LED_BUILTINs that sneaked in * Don't kill valid pin derfine |
||
|
|
571c1ac34c |
Initial serialModule cleanup (#9465)
* Initial serialModule cleanup * Move SERIAL_PRINT_PORT definition to variant.h * Add missed c6 check * Update src/modules/SerialModule.cpp Compile error for invalid SERIAL_PRINT_OBJECT value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Andrew YongandGitHub
|
fb6d199d36 |
feat: Add Russell, a board designed to go Up! on a balloon (#9079)
Hardware repository: https://github.com/Meshtastic-Malaysia/russell - Designed to mount on an ER34615/IFR32700 cell - RAK3172 STM32WLE5CCU6 MCU + integrated SX1262 LoRa - CDtop CD-PA1010D GPS - Bosch Sensortec BME280 sensor - Consonance CN3158 LiFePO4 solar charger Signed-off-by: Andrew Yong <me@ndoo.sg> |
||
|
oscgonferandGitHub
|
5a81403594 | Move PMSA003I to separate class and update AQ telemetry (#7190) | ||
|
JorropoandGitHub
|
beb268ff25 |
Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit
|
||
|
JorropoandGitHub
|
0d11331d18 | add a .clang-format file (#9154) | ||
|
AustinandGitHub
|
96c42229b0 | Renovate all the things (#8994) | ||
|
AustinandGitHub
|
917794ebab |
PIO: Remove useless inheritence (references extends env) (#8987)
Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier. |
||
|
AustinandGitHub
|
66ff1536f3 | Meshtastic build manifest (#8248) | ||
|
Jonathan BennettandGitHub
|
41cbd77db3 | Move everything from /arch to /variant (#8831) | ||
|
Andrew YongandGitHub
|
4f817d69eb |
fix(wio-e5): Fix LED state inversion (#8500)
Wio-E5 currently has LED appearing to be steadily on, due to incorrect LED_STATE_ON (it is actually briefly flashing off, but visually it is hard to perceive). Wio-E5 has LED between GPIO PB5 and VCC, so LED_STATE_ON should be 0 for LED to blink correctly. With this commit, it is now flashing correctly. Refer to schematics: * [Wio-E5 Development Kit](https://files.seeedstudio.com/products/113990934/LoRa-E5%20Dev%20Board%20v1.0.pdf) * [Wio-E5 mini](https://files.seeedstudio.com/products/113990939/LoRa-E5%20mini%20v1.0.pdf) Signed-off-by: Andrew Yong <me@ndoo.sg> |
||
|
|
81a5aeff74 |
Fix serial pins for Ebyte E77 MBL board (#8246)
Also move RAK3172 and new EBYTE_E77_MBL define to variant.h, as this makes VSCode know about the defines properly... Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Chloe BethelandGitHub
|
2e8f4ad6af |
Add RF switch settings for STM32WL variants (#7813)
* Add RF switch settings for STM32WL variants * Shuffle ifdefs in STM32WLE5JCInterface to make it not get built by other targets |
||
|
Chloe BethelandGitHub
|
0952007805 |
Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797)
* Show ExternalNotification as excluded if it is * Enable ExternalNotification, SerialModule and RangeTest on STM32WL * Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin * Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1) * Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping. |
||
|
AustinandGitHub
|
4f895f744b | Take control of our PRs! (#7445) | ||
|
AustinandGitHub
|
1c2a3c620f | STM32: Migrate variants to new structure (#7389) |