Fixes this build error:
<command-line>: error: expected unqualified-id before '-' token
/home/<snip>/.platformio/packages/framework-arduinoespressif32/variants/esp32s3/pins_arduino.h:15:22: note: in expansion of macro 'LED_BUILTIN'
15 | static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
| ^~~~~~~~~~~
More info: https://github.com/meshtastic/firmware/pull/9122#issuecomment-4028263894
The fix is consistent with variants/esp32s3/heltec_v3/platformio.ini
This commit is intentionally on the develop branch, because it's harmless to
develop branch, and makes us more ready for pioarduino when the time comes.
Heltec v4 introduced in: https://github.com/meshtastic/firmware/pull/7845
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update Heltec Tracker v2 to version KCT8103L.
* Fixed the issue of inaccurate comments.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Just set LED_BUILTIN universally to -1, as we don't use it.
* LUD_BUILTIN workarounds
* Squash the LED_BUILTINs that sneaked in
* Don't kill valid pin derfine
* Fix LNA/PA power control for Heltec v4, wireless tracker v2
* Stop using pin 46 as RF switch, just let DIO2 switch handle the RF path
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Migrate all of the Meshtastic API attributes into the ini as a source of truth
* Cleanup garbage coalescing
* Another spot
* We already account for inkhud and mui
* Consolidate
* Removed them
* Boogers
* Infer
* Copying manifest should always succeed
* Remove portduino guards
* Rename
* None
Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless)
This makes the configs more concise and make future PIO variants/ libdeps audits easier.
* Plain RAK4631 should not compile EInk and TFT display code
* Add USE_TFTDISPLAY to variant files.
* Derp
* Undo the platformio.ini changes to heltec_v4
* Drop unneeded src_filter lines
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Jason P <applewiz@mac.com>
* Add the Heltec v4 expansion box.
* Change heltec-v4-oled to heltec-v4.
* Add touchscreen to I2C scanning.
* Add reset and busy pins to the ST7789.
* Ignore the touch interrupt pin and extend the sleep time to 1 hour.
* Remove the default sleep function.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Introduce non-linear TX_GAIN_LORA
Previously, our TX_GAIN_LORA setting was a single number, intended
to represent the signal gain going through a power amp (plus or minus
antenna, attenuator, and other parts of the RF chain).
It turns out the relationship between the input power (i.e. from an SX1262)
and total output power is often non-linear. While we fudged a 1dBm difference
here and there with existing chips, the Heltec v4 has a 5dBm difference in gain
depending on which end of the input power (and frequency) you are at.
To allow people to run their Heltec v4 at max power when legal, and future
proof our code, this patch introduced an optional array-based TX_GAIN_LORA.
Define NUM_PA_POINTS and set TX_GAIN_LORA to gain values for a given input
power in 1dBm increments, and all will work.
For linear systems, just continue to define TX_GAIN_LORA as a number.
Fixes https://github.com/meshtastic/firmware/issues/8070
* Remove temporary power limit on heltec v4
* Add function RadioLibInterface::checkOutputPower
* Ensure SX126x reaches minimum supported power.
* Keep it simple, instead.
Thomas GöttgensandGitHub
Jonathan BennettandBen Meadors
ManuelandBen Meadors
Catalin PatuleaandBen Meadors
AustinandGitHub
Tom Fifield