* Added "Hops away" on display
Added in logic that displays "hops away" instead of signal strength when the node is more than 0 hops away.
* Added comment
* Update extensions.json to same as master
* attempt 2 at reverting extensions JSON
* Attempt 3 at getting extensions right
* Take 4. should be reverting to before my edits
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Update images.h
Add some fun emojis
* Update Screen.cpp
Update Screen.cpp to display single emojis on the OLED of devices, if a single known emoji is detected
* Update images.h
add ? ! fog emojis
* Update Screen.cpp
add logic for new emojis
* Update Screen.cpp
correct formatting
* Update images.h
correct formatting
* Update Screen.cpp
change formatting via trunk application
* Update images.h
change formatting based on trunk application
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump platfomio/espressif32 version to latest 6.7.0
* Fix deprecated constants
* Remove pin defs already defined by the framework
* ESP_EXT1_WAKEUP_ALL_LOW is deprecated for any target except esp32
* Enable LTO and use newlib nano flavor
* Make trunk happy
* Respect build_unflags of base env
* Recover float printfing
* Disable BLE_SM_PAIR_AUTHREQ_SC
* Distribute BLE_SM_PAIR_KEY_DIST_ID too
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* E-Ink displays sometimes use timestamp instead of delta
* Allow users to disable E-Ink screensaver
* Clarify variable's purpose
* Operator order oopsie
* Picky print problem
* Implement for all display, not just E-Ink
* Align "unknown age" behavior with existing code
* One more use of timestamp, if screen is wide enough
* Don't reboot for certain config prefs and make accelerometer thread re-entrant
* WHOOPS
* Don't reboot for LED heartbeat and button press
* Remove TZ
by rearranging the arguments to match the expected input order.
The lwip library makes an internal reorder or the arguments
depending on the netmask to work with both ESP and Arduino
platforms.
The input order was incorrect when running on an rp2040 device.
Co-authored-by: Henrik Witt-Hansen <henrik@hardttoolkit.org>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Portduino multiple logging levels
* Fixes based on GPSFan work
* Fix derped logic
* Correct size field for AID message
* Reformat to add comments, beginning of GPS rework
* Update PM2 message for Neo-6
* Correct ECO mode logic as ECO mode is only for Neo-6
* Cleanup ubx.h add a few more comments
* GPS rework, changes for M8 and stub for M10
* Add VALSET commands for u-blox M10 receivers
* Add VALSET commands for u-blox M10 receivers
tweak M8 commands
add comments for VALSET configuration commands
* Add commands to init M10 receivers,
tweak the M8 init sequence, this is a WIP as there are still some issues during init.
Add M10 version of PMREQ.
* Add wakeup source of uartrx to PMREQ_10
The M10 does not respond to commands when asleep,
may need to do this for the M8 as well
* Enable NMEA messages on USB port.
Normally, it is a good idea to disable messages on unused ports.
Native Linux needs to be able to use GNSS modules connected via
via either serial or USB.
In the future I2C connections may be required, but are not enabled for now.
* Save the config for all u-blox receiver types.
The M10 supports this command in addition to saving using
the VALSET commands for the RAM & BBR layers.
* Address Issue #3779 RAK12500 GPS Checksum failures
Remove NMEA sentences that are not processed by TinyGPS++ or Meshtastic.
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Thomas Göttgens
Ben MeadorsandGitHub
ManuelandGitHub
Jonathan BennettandGitHub
Neil HaoandGitHub
andrew-morozandGitHub
Andrew Moroz
todd-herbertandGitHub
caveman99andgithub-actions[bot]
Jorge Castillo
