kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 5 Packages Projects Releases Wiki Activity
11,226 Commits 1 Branch 0 Tags
8af9e7fbdc912ba5b423e4c7885c3380f5d73b88
Commit Graph
1163 Commits
Author SHA1 Message Date
Andrew YongGitHubBen Meadors
 		1f7ed6888a feat(stm32): Add Milesight GS301 Bathroom Odor Detector (#9359) 
- STM32WLE5CCU6
- NFC (unsupported): NXP NT3H2211W0FTTJ (NTAG I2C plus: NFC Forum T2T with I2C interface, password protection and energy harvesting)
- Sensor (unsupported): Analog ADuCM355 (SHTC3 is connected to ADuCM355 and not directly accessible)
- Bicolor LED
- User button (presently not functional in STM32 variants)

The definitions for sensor voltage control are present but commented out to save power, due to lack of sensor support.

Powered by 4x 4000mAh RAMWAY ER18505 Li-SOCl2 batteries.

Flashing:

1. Power down device (remove batteries)
2. Connect USB-UART to J1 (USART2), pinout is below, do not connect +3V3 pin yet
3. Short BOOT pins next to J1
4. Connect +3V3 pin or insert batteries while BOOT pins are shorted
5. Use STM32CubeProgrammer, connect by UART mode
6. Load firmware .hex and download

J1 (USART2); Molex Picoblade (P=1.25mm * 4)

1. +3V3
2. PA3_USART2_RX_J1
3. PA2_USART2_TX_J1
4. GND

Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-01-29 06:43:48 -06:00
treysisGitHubBen Meadors
 		31bf51b3f2 Add support for the hardware buttons on Bluetooth Nugget device (#9468) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-01-29 06:38:49 -06:00
Ben Meadors 415686dd06 Trunk 2026-01-29 05:56:19 -06:00
Quency-DGitHubBen Meadors
 		b2f2f6b305 Add a watchdog module to meshsolar. (#9337) 
* add watchdog module

* Restore the code in power.h

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-01-28 20:41:27 -06:00
Jonathan Bennett df400850c1 Undefine LED_BUILTIN where needed 2026-01-28 18:56:57 -06:00
Jonathan BennettandGitHub 4fd0a8276b Just set LED_BUILTIN universally to -1, as we don't use it. (#8830) 
* Just set LED_BUILTIN universally to -1, as we don't use it.

* LUD_BUILTIN workarounds

* Squash the LED_BUILTINs that sneaked in

* Don't kill valid pin derfine
 2026-01-28 17:09:13 -06:00
Jonathan BennettGitHubCopilot
 		571c1ac34c Initial serialModule cleanup (#9465) 
* Initial serialModule cleanup

* Move SERIAL_PRINT_PORT definition to variant.h

* Add missed c6 check

* Update src/modules/SerialModule.cpp

Compile error for invalid SERIAL_PRINT_OBJECT value

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
 2026-01-28 14:08:32 -06:00
Ben Meadors fb635987d1 Merge remote-tracking branch 'origin/master' into develop 2026-01-28 13:31:39 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		c1e3f56324 Update LovyanGFX to v1.2.19 (#9405) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-28 11:08:07 -06:00
Jonathan BennettandGitHub 69a42e1fd2 Add portduino_status, assign hardware device IDs... (#9441) 
* Add portduino_status, assign hardware device IDs, and try to recover a CH341 device on a USB error

* Minor fixes suggested by Copilot
 2026-01-27 18:00:20 -06:00
Ben Meadors e1e8d6124d Merge branch 'master' into develop 2026-01-27 14:01:27 -06:00
Jonathan BennettandGitHub 10b2eae70c Move more code out of main-nrf52 into variant.cpp (#9450) 2026-01-27 13:56:32 -06:00
Jonathan BennettandGitHub 91ad861b26 Add Thinknode M4 variant_shutdown() (#9449) 2026-01-27 09:56:56 -06:00
Ben Meadors c8079d4115 Metadata for heltec tracker v2 2026-01-27 08:05:36 -06:00
Jonathan BennettandGitHub a2e8e232f1 Remove the unused OCV_ARRAYs and move one to a variant.h (#9442) 2026-01-26 16:58:16 -06:00
Jonathan BennettandGitHub 3d58c6e916 Trackball revamp (#9440) 
* Trackball revamp

* Use Throttle

* Volatile!
 2026-01-26 14:28:05 -06:00
Jonathan BennettandGitHub c038cfe69a Move device code from main.cpp to earlyInitVariant (#9438) 2026-01-26 11:54:14 -06:00
Ben Meadors 0770f25e79 Merge remote-tracking branch 'origin/master' into develop 2026-01-26 08:56:38 -06:00
Uğur ALTINSOYGitHubBen Meadors
 		6cff13623f Added Minimesh variant (#9289) 
* Minimesh Lite Added

* Add Minimesh Lite NRF

* Added board_level = extra

* Fix formatting and optimize image for Minimesh Lite

* Change image

* The image has been deleted.

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-01-24 08:38:07 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		b627fa720b Update SensorLib to v0.3.4 (#9396) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-24 05:46:46 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		9faf178bdc Update XPowersLib to v0.3.3 (#9354) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-24 05:45:26 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		c98f134b40 Update meshtastic-esp32_https_server digest to b0f3960 (#9393) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-24 05:39:22 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		5838b26d90 Update lewisxhe-SensorLib to v0.3.4 (#9395) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-24 05:39:05 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		04d2dd3b1c Update GxEPD2 to v1.6.6 (#9412) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-24 05:16:47 -06:00
Ben Meadors d407ec1975 Merge remote-tracking branch 'origin/master' into develop 2026-01-24 04:47:24 -06:00
Jonathan BennettandGitHub 6d6a0734b0 Add pin sense to wake M6 on Solar Charge (#9416) 2026-01-23 15:37:16 -06:00
MattijsGitHubBen Meadors
 		0157a769c3 Make BLE TX power configurable for nRF52 variants (#9232) 
* Make BLE TX power configurable for nRF52 variants

* Include BLE TX power setting in T114 variant.h as tested

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2026-01-23 11:26:01 -06:00
JorropoandGitHub 4744010295 run trunk fmt -a (#9400) 
* run trunk fmt -a

* fix bracket bug

This was introduced by @tedwardd and @thebentern in 021106dfe5.

See this diff:
         else
+            checkConfigPort = false;
             printf("Using config file %d\n", TCPPort);
 2026-01-22 15:46:37 -06:00
Andrew YongandGitHub fb6d199d36 feat: Add Russell, a board designed to go Up! on a balloon (#9079) 
Hardware repository: https://github.com/Meshtastic-Malaysia/russell
- Designed to mount on an ER34615/IFR32700 cell
- RAK3172 STM32WLE5CCU6 MCU + integrated SX1262 LoRa
- CDtop CD-PA1010D GPS
- Bosch Sensortec BME280 sensor
- Consonance CN3158 LiFePO4 solar charger

Signed-off-by: Andrew Yong <me@ndoo.sg>
 2026-01-20 06:38:04 -06:00
Ben Meadors fc268d43d0 Add Meshtastic exclusion flags for webserver and paxcounter in platformio.ini 2026-01-19 16:57:21 -06:00
Ben Meadors ff50ba4002 Remove bsec from OG ESP32 to fix DRAM overflow 2026-01-19 12:12:14 -06:00
Ben MeadorsGitHubJake-B
 		64116cd0d3 Meshtastic OTA (moar) (#9327) 
* Initial commit of combined BLE and WiFi OTA

* Incorporate ota_hash in AdminMessage protobuf

* OTA protobuf changes

* Trunk fmt

* Partition header check for OTA type

* Guards

* Guards

* Derp

* Missed one

---------

Co-authored-by: Jake-B <jake-b@users.noreply.github.com>
 2026-01-15 14:36:36 -06:00
Ben MeadorsGitHubgithub-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>vidplace7HarukiToreda
 		b4157bd9bb Heltec V4 TFT metadata (#9325) 
* Upgrade trunk (#9323)

Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>

* ICM20948 IMU sleep (#9324)

* Add v4-tft metadata

---------

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com>
Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
 2026-01-15 06:48:41 -06:00
AustinandGitHub 7e4e772113 Add EByte EoRa-Hub (#9169) 2026-01-15 06:24:10 -06:00
Ben Meadors ff8316f895 Merge branch 'master' into develop 2026-01-15 06:18:43 -06:00
Thomas GöttgensGitHubJonathan Bennett
 		233e6acc85 Preliminary Thinknode M4 Support (#8754) 
* Preliminary Thinknode M4 Support

* oops

* Fix RF switch TX configuration

* trunk'd

* GPS fix for M4

* Battery handling and LED for M4

* Trunk

* Drop debug warnings

* Make Red LED notification

* Merge cleanup

* Make white LEDs flash during charge

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
 2026-01-14 21:36:53 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		6537eeab03 Update pschatzmann_arduino-audio-driver to v0.2.0 (#9272) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-15 11:00:24 +11:00
oscgonferandGitHub 5a81403594 Move PMSA003I to separate class and update AQ telemetry (#7190) 2026-01-14 13:00:08 -06:00
Jonathan BennettandGitHub 5d7d1ae7a5 Adds Custom battery curve for thinknode m6 (#9313) 2026-01-14 11:40:35 -06:00
ManuelandGitHub 940b3e236b fix GPS for T-Watch S3 plus (#9312) 
* support T-Watch S3 Plus GPS

* HAS_GPS

* define BUTTON_PIN

* swap GPS pins, USB_MODE=1
 2026-01-14 10:01:08 -06:00
Ben Meadors 6f36f39da9 Fix up T-Beam 1W HW_MODEL 2026-01-13 05:48:14 -06:00
Ben MeadorsandGitHub ded4f57cb7 Partition name in manifest script (#9294) 
* Fix up T-Beam 1W HW_MODEL

* Add part_name for bin files

* app0
 2026-01-13 05:47:08 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		f73a944fcb Update ESP8266SAM to v1.1.0 (#9271) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-12 19:39:58 -06:00
Ben Meadors cbaa58894f Merge remote-tracking branch 'origin/master' into develop 2026-01-12 10:50:30 -06:00
AustinandGitHub 1df26c2c5a Renovate: Ignore lovyangfx for elecrow-panel (#9279) 2026-01-12 10:47:35 -06:00
Ben Meadors 99d9191224 Merge remote-tracking branch 'origin/develop' 2026-01-12 10:47:08 -06:00
AustinandGitHub f4d7dab4ca EXCLUDE_AUDIO on (original) ESP32 (#9276) 
iram is scarce, give it back!
 2026-01-12 08:43:09 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		e9bdd2b031 Update ArduinoJson to v6.21.5 (#9265) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-11 18:36:47 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		f805aec867 Update GxEPD2 to v1.6.5 (#9266) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-11 18:36:37 -06:00
renovate[bot]GitHubrenovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 		f38b4c1a98 chore(deps): update meshtastic-gxepd2 digest to a05c11c (#9264) 
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
 2026-01-11 16:30:27 -06:00