8c6cc5dbde169e3a4b9e486d7968292e4856c5dc
176
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  HarukiToredaandGitHub
|
8c6cc5dbde |
Don't show messages from Ignored nodes (#11068)
* Honor Node Ignore messages * Screenless node fix |
||
 Thomas GöttgensandGitHub
|
8147970957 |
AdminModule: only accept admin responses to requests we sent (#11024)
* AdminModule: only accept admin responses to requests we sent An admin *_response short-circuited the auth and session-passkey checks that gate every other admin message, so any node could deliver one. On a channel the module listens to unauthenticated, a get_module_config_response drives the remote-hardware pin handler with attacker-supplied values. Track the destination of outgoing admin requests (per remote, with the pinned PKC key when there is one) and accept a response only from a node with a matching outstanding request, inside the same window as the session passkey. Local (from == 0) admin is unchanged; PhoneAPI already gates it. Also fix the response dispatch: get_module_config_response.which_payload_variant is a ModuleConfig oneof tag, but it was compared against the AdminMessage ModuleConfigType enum (different numbering), so the handler never ran. Compare against the oneof tag. * AdminModule: rollover-safe request window, bind response to request type Two review refinements to the request/response pairing: Use Throttle::isWithinTimespanMs for the outstanding-request expiry instead of comparing millis()/1000 sums, which mis-expired across the millis() rollover. Bind each accepted response to a request type actually sent to that node. Each outstanding record now carries a bitmask of the response variants its requests authorize, so a get_owner request no longer admits a get_module_config response. The mask accumulates per remote, so a client may still pipeline several request types to one node and have every answer accepted. * AdminModule: track admin requests per-request, not per-node Reworks the outstanding-request table so each request is its own entry with its own expiry window and pinned key, replacing the per-node bitmask that shared one timestamp and one key across every response variant. That sharing let a later request to the same node extend an earlier one's window and, worse, clear its PKC pin: an unpinned request cleared keyValid, so a plaintext response to an earlier PKC-pinned request was then accepted. Per-request entries keep each pin intact. Identical requests are de-duplicated (a client may fetch several config subtypes, all answered by one response variant) and eviction compares elapsed time, which is rollover-safe. Test: a pinned request's response still requires its key after an unpinned request to the same node. * AdminModule: match module-config subtype and consume answered requests Two refinements to the request/response pairing: Only remote_hardware get_module_config_response mutates state (the pin table), so it must answer a request for that exact ModuleConfigType, not just any module-config request. Each entry records the requested subtype and the gate checks it. A matched request is now consumed on accept, so a node cannot replay a state-mutating response within the window. Because one request yields one response, request de-dup is dropped (a client's N indexed get_channel requests are N entries, each consumed once). Tests: a non-remote-hardware request does not admit a remote_hardware response, and a second copy of an answered response is rejected. |
||
 
|
b71c1adb26 |
stm32wl: add hardware RTC support (rak3172) (#10961)
* stm32wl: add hardware RTC support infrastructure Wires the STM32WL chip's internal RTC (running off the LSE 32.768kHz crystal) into meshtastic's existing time-of-day framework (perhapsSetRTC()/readFromRTC()), following the same pattern already used for I2C RTC chips (RV3028, PCF8563/85063, RX8130CE). LSE is started and polled manually before ever calling into the STM32RTC library, with our own bounded timeout - the library's own internal LSE startup path has no bounded fallback and hangs forever via Error_Handler() if the crystal never locks, so this is required for a board with a missing/faulty crystal to boot normally rather than hang. Gated behind a new HAS_LSE variant flag (currently unset everywhere, so this is inert until a variant opts in - see follow-up commit). Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * gps: qualify RTC.h includes to avoid case-insensitive filesystem collision with STM32RTC The stm32duino STM32RTC library (added to lib_deps in a follow-up commit) ships its own src/rtc.h. On case-insensitive filesystems (the macOS default), an unqualified #include "RTC.h"/<RTC.h> from any file outside src/gps/ resolves to the library's rtc.h instead of src/gps/RTC.h, since PlatformIO's LDF puts lib_deps include paths ahead of the project's own -Isrc/gps. Qualify every include as gps/RTC.h so it can't collide with any same-named header a future dependency might ship, regardless of filesystem case sensitivity. Purely mechanical, no behavior change. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl(rak3172): enable hardware RTC support Opts rak3172 into the HAS_LSE infrastructure added previously: sets STM32WL_LSE_DRIVE to a conservative default and pulls in the STM32RTC library. rak3172 has ~63KB flash headroom going in; build-verified at 76.7% flash usage after this change (up from a 73.8% baseline), well within budget. wio-e5 is not opted in here despite sharing the same STM32WLE5 chip - it's already at 96.8% flash usage today (GPS + I2C sensor support compiled in, unlike rak3172), leaving too little headroom to safely add STM32RTC without first trimming something else. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl: add docstrings for LSE/RTC setup functions Addresses CodeRabbit's docstring coverage check on PR #10961. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> * stm32wl: address CodeRabbit nitpicks on PR #10961 - Brace the single-statement HAS_LSE branch in perhapsSetRTC() to match the sibling readFromRTC() branch's style. - Quote the RTC.h include in PhoneAPI.cpp for consistency with every other qualified include site. Signed-off-by: Andrew Yong <me@ndoo.sg> Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
75f406745d |
Double-press: fall back to first channel with position enabled when primary precision == 0 (#11005)
* Double-press: fall back to first channel with position enabled when primary precision == 0 * Add missing include * Fix trunk fmt * Enhance logging for fallback nodeinfo sending --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> |
||
|
Ben MeadorsandGitHub
|
0902c13473 |
feat: build-flagged frame injection into the RX pipeline for testing (#11011)
MeshService::injectAsReceived (gated by MESHTASTIC_ENABLE_FRAME_INJECTION, off by default) extends the portduino SimRadio SIMULATOR_APP path to real hardware: a client-supplied frame, wrapped in a Compressed envelope on the SIMULATOR_APP portnum, is delivered through the real receive pipeline (router->enqueueReceivedMessage) as if it arrived off the LoRa chip. It therefore exercises from!=0 enforcement, channel/PKC decryption, remote-admin authorization, and hop/dedup/module dispatch - paths the toRadio API cannot reach (it forces from=0). from==0 is dropped to match real RX. This forges over-the-air traffic, so the flag must never ship enabled. Drive it with the meshtastic-mcp inject_frame tool / cli/meshinject.py. Documents the technique in the agent-facing copilot-instructions.md + AGENTS.md. |
||
|
Andrew YongandGitHub
|
0ae44d7017 |
fix(router): null-check packetPool/clientNotificationPool allocations (#10948)
On platforms where these pools are heap-backed (MemoryDynamic - used whenever there isn't enough static RAM for a fixed pool, e.g. ARCH_STM32WL or BOARD_HAS_PSRAM), allocCopy()/allocZeroed() return nullptr on allocation failure and already log a warning, but most callers dereferenced the result unconditionally. Under real heap pressure this reliably produced a HardFault - reproduced on STM32WL hardware under sustained mesh traffic, including the RX entry point (RadioLibInterface::handleReceiveInterrupt) where every received packet is allocated. Adds null checks at all call sites that were missing one, mirroring the guard pattern already used correctly elsewhere in the same files (e.g. RadioInterface.cpp's sendErrorNotification). On allocation failure, callers now skip the send/retransmission/notification and log nothing further (the allocator already did) rather than crash. Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> |
||
|
|
d16ae2b098 |
Rename power.h to Power.h for casing consistency with Power.cpp (#10919)
Every other .cpp/.h pair in src/ (350 of 351) uses identical capitalization between the two files. Power.cpp/power.h was the sole outlier; this aligns it with the rest of the codebase. No functional change — all includes already resolved this file the same way on case-sensitive filesystems. Assisted-by: Claude Sonnet 5 <noreply@anthropic.com> Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben MeadorsandGitHub
|
b4dd76a4db |
Harden against crafted-packet crashes + adversarial fuzzing (#10862)
Audit and fuzzing of the RF-packet decode -> dispatch -> display/phone paths for the "crash a node or phone with a crafted packet" surface, beyond the XEdDSA authenticity work. Crash fixes (reproduced under AddressSanitizer / UBSan): - GeoCoord::latLongToUTM/latLongToMGRS read fixed letter tables out of bounds on extreme latitude_i/longitude_i from a received Position, and narrowed out-of-range easting/northing doubles to unsigned (float-cast-overflow UB). Clamp the UTM zone, the easting/northing narrowing, and the band/col/row indices. Regression: test_geocoord_extreme_coords_no_oob. - EnvironmentTelemetry/AirQualityTelemetry render attacker floats via String(float), which on nRF52/RP2040/STM32/portduino formats into a fixed char[33] (dtostrf) and overflows near FLT_MAX. Clamp the rendered metrics via UnitConversions::displaySafeFloat (finite + magnitude <= 1e9), unit-tested in test_type_conversions. Defense-in-depth + robustness: - TraceRouteModule::printRoute: fix an snr_back[-1] OOB read (wrong count in the guard) and stop formatting the INT8_MIN "unknown SNR" sentinel as a dB value. - WaypointModule/NodeDB: sanitize untrusted strings before the OLED renderer and the phone-facing ClientNotification (belt-and-suspenders vs PB_VALIDATE_UTF8). - MeshService::sendToPhone: withhold NODEINFO/WAYPOINT packets whose nested string won't cleanly decode, protecting strict phone protobuf decoders without affecting mesh relay. Tests: new test_fuzz_decode (protobuf decode + UTF-8 sanitizer fuzz) and test_fuzz_packets (perhapsDecode / module-handler / traceroute / phone-gate fuzz), all under AddressSanitizer; native-suite-count 25 -> 27. Full suite 515/515 green. |
||
 TomandGitHub
|
fd62322876 |
Log tidy (#10798)
* clarify channel number formatting and fix the fixed-width padded nodeIDs * use the explicit 0x%08x for packets and nodeIDs throughout * LLM instructions |
||
 
|
4a1ff18f57 |
feat: add Nordic nRF54L15-DK variant (Zephyr + BLE + LoRa) (#10193)
* feat: add Nordic nRF54L15-DK variant (Zephyr + BLE + LoRa)
Adds a community hardware variant for the Nordic nRF54L15-DK (PCA10156)
with an external EBYTE E22-900M30S (SX1262) LoRa module. First Meshtastic
port running on the Zephyr RTOS; all other Nordic targets use the nRF5
SoftDevice stack.
Scope
-----
- New Zephyr-based platform layer under src/platform/nrf54l15/ providing
Arduino-compatible shims (Arduino.h, SPI, Wire, Print, Stream) over the
Zephyr APIs plus a LittleFS-backed InternalFileSystem on SPIM20.
- Bluetooth LE peripheral (NRF54L15Bluetooth.*) built on the Zephyr BT
host stack, exposing the Meshtastic GATT service with legacy
connectable advertising, just-works pairing, dynamic MTU exchange
(up to 247 bytes), and iOS connection-parameter tweaks.
- Variant directory variants/nrf54l15/nrf54l15dk/ with pin map for the
E22 module on connector J1, PlatformIO env (nrf54l15dk), Zephyr
DT overlay and a wiring README.
- Zephyr project config (zephyr/prj.conf + board overlay) tuned for
BT + LoRa: 16 KB main stack, 4 KB BT RX thread, RTT logging in
immediate mode, newlib-nano heap sized to leave room for the GATT
pools while still allowing ATT MTU=247.
- extra_scripts/nrf54l15_linker.py works around a PlatformIO + old Ninja
issue where Zephyr's two-pass linker script generation does not run
automatically; the post-script parses build.ninja and invokes the
gcc -E step directly before the final link.
- boards/nrf54l15dk.json board definition (PlatformIO needs it for the
DK; the Seeed platform only ships the XIAO variants).
- variants/rp2350/rp2350.ini excludes platform/nrf54l15/ from RP2350
build_src_filter so the shared platform tree does not leak between
targets.
- .gitignore: add nRF J-Link / RTT debug artifacts (flash.jlink,
rtt_*.txt).
Shared source changes
---------------------
- src/main.{cpp,h}, src/RedirectablePrint.cpp, src/FSCommon.{cpp,h},
src/mesh/{Channels,NodeDB,RadioLibInterface,MeshService,PhoneAPI}.cpp,
src/mesh/RadioLibInterface.h, src/modules/AdminModule.cpp: add small
guards / helpers so the Zephyr build compiles alongside the Arduino
targets. Behavior on existing boards is unchanged.
Hardware model
--------------
HW_VENDOR maps to meshtastic_HardwareModel_PRIVATE_HW until a dedicated
protobuf enum value is assigned upstream. The variant declares
custom_meshtastic_hw_model = 132 so the maintainers can wire the new
enum value through the protobufs repo after merge.
Hardware note
-------------
The E22-900M30S does not connect its DIO2 pin to TXEN internally — a
wire/solder bridge between DIO2 and TXEN on the module is required for
TX to work. Details and full pin map are in the variant README.
Validation
----------
Built clean against develop. On real hardware (April 2026) the port
passes end-to-end: iOS companion app pairs and connects, configuration
round-trip works, LoRa TX/RX reaches a canonical tbeam on the same mesh
channel, NodeDB updates propagate both ways, and traceroute completes.
* fix(nrf54l15): use atomic fs_rename instead of copy fallback
Zephyr LittleFS on nrf54l15 supports fs_rename natively, so route it
through the same atomic path as ESP32. The previous copyFile+remove
fallback truncated the destination before copying, leaving 0-byte files
if interrupted mid-write.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): expand storage_partition from 36KB to 700KB
LittleFS on the default 9-block (36KB) storage_partition ran out of
space during copy-on-write of config.proto, causing fs_write to return
ENOSPC and pb_encode to surface "io error" when saving configuration
via the mobile app.
Reclaim slot1_partition (the MCUboot secondary slot — unused since we
flash directly via J-Link) and grow storage_partition to span
0xb6000..0x165000 (~175 blocks).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): drop USERPREFS_LORACONFIG_* so LoRa config stays mutable
NodeDB rewrites LoRa config from USERPREFS_LORACONFIG_* on every boot,
which prevented reconfiguration via the BLE/serial app. Drop the
variant-level defaults; users configure region and modem preset through
the app like every other variant.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): enforce MITM passkey pairing on GATT service
- Add MESH_PERM_READ/MESH_PERM_WRITE macros (READ_AUTHEN/WRITE_AUTHEN)
on all mesh service characteristics so clients must complete passkey
exchange before accessing fromNum/fromRadio/toRadio/logRadio.
- Wire FIXED_PIN mode to bt_passkey_set() so the device advertises a
known PIN (config.bluetooth.fixed_pin); RANDOM_PIN keeps default
per-pairing random passkey.
- Reduce BleDeferredThread HARD_WATCHDOG_MS from 3min to 1min.
- prj.conf: CONFIG_BT_SMP_ENFORCE_MITM=y, CONFIG_BT_FIXED_PASSKEY=y,
CONFIG_BT_SMP_SC_PAIR_ONLY=n (legacy fallback for clients that abort
SC pairing with reason 0x01 within 150ms).
* fix(nrf54l15): resolve develop-merge conflict + cppcheck warnings
The `Merge branch 'develop'` left two ~RadioLibInterface() declarations
in src/mesh/RadioLibInterface.h: the inline version added upstream by
PR #10254 (which independently applied the same UAF guard this PR was
carrying) and the out-of-line version this PR introduced. GCC rejects
the duplicate, breaking every platform build. Drop the out-of-line
declaration + definition; keep upstream's inline form.
Also silence the 13 cppcheck low warnings introduced by the new
nrf54l15 Arduino shim — Arduino's `String`/`SPISettings` API contract
relies on implicit single-arg constructors used pervasively by
existing Meshtastic code, so suppress `noExplicitConstructor` inline
with a comment instead of breaking the API. The few mechanical wins
(`const tmp[2]`, `const uint32_t *sp`) are applied directly.
* fmt: fix Trunk Check lint issues on nrf54l15-port
- extra_scripts/nrf54l15_linker.py: move regular imports above
Import("env") to silence E402, add trunk-ignore-all(F821) for the
PIO/SCons SConstruct injection (matches esp32_pre.py / nrf52_extra.py
convention)
- src/platform/nrf54l15/NRF54L15Bluetooth.cpp: clang-format 16.0.3
- boards/nrf54l15dk.json + variants/nrf54l15/nrf54l15dk/README.md:
prettier 3.8.3 (also resolves markdownlint MD060 on README tables)
No behavior change.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): address Copilot review comments + correct clang-format style
Six review threads from the 2026-04-30 Copilot review:
- src/platform/nrf54l15/nrf54l15_main.cpp: validate PSP against the nRF54L15
SRAM range (0x20000000..0x20040000) and 4-byte alignment before walking the
faulting thread's stack, and clamp the walk so it never reads past the end
of RAM. Prevents a second fault inside the fatal handler when PSP is
corrupted (common in real faults).
- src/platform/nrf54l15/nrf54l15_arduino.cpp: gate the bring-up printk traces
in digitalWrite/digitalRead (CS/NRESET toggle log, BUSY-before-NRESET
snapshot, BUSY periodic timeline) behind a new -DNRF54L15_GPIO_DEBUG flag
that is off by default. The "dev NOT READY" message stays unconditional —
it indicates a genuine hardware/DTS misconfig.
- src/modules/AdminModule.cpp: don't mutate config.device.output_gpio_enabled
from handleGetConfig(). Reflect the live pin state in the response payload
only — a getter must not write back to disk-persisted state.
- src/platform/nrf54l15/InternalFileSystem.h: derive totalBytes() from
FIXED_PARTITION_SIZE(storage_partition) at compile time so it tracks the
DK overlay's ~700 KB partition instead of the stale 36 KB hard-coded value.
Updated the file header comment accordingly.
- extra_scripts/nrf54l15_linker.py: make _extract_gcc_command() handle the
POSIX Ninja COMMAND format (no `cmd.exe /C "..."` wrapper) in addition to
the Windows form, so the script doesn't hard-fail on Linux/macOS hosts.
- src/platform/nrf54l15/NRF54L15Bluetooth.cpp: clamp NO_PIN to RANDOM_PIN
with a one-shot LOG_WARN. The mesh GATT permissions are declared with
BT_GATT_PERM_*_AUTHEN and prj.conf sets CONFIG_BT_SMP_ENFORCE_MITM=y, so
NO_PIN with no auth callbacks would leave every characteristic returning
BT_ATT_ERR_AUTHENTICATION. Falling back to RANDOM_PIN keeps the link
usable instead of silently broken. Also re-formatted this file with the
project's .trunk/configs/.clang-format (Linux braces, 4-space indent,
130-col) — the previous lint-fix commit a2aca3234 accidentally used the
default LLVM style here, which CI's clang-format would have rejected.
Build verified: pio run -e nrf54l15dk passes, RAM 47.4%, Flash 28.6%.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): address remaining Copilot review threads
Round 2/3 review fixes — bugs first, then docs/portability:
BLE concurrency (NRF54L15Bluetooth.cpp):
- onNowHasData / sendLog / BleDeferredThread / shutdown: acquire
active_conn under ble_mutex via new acquire_active_conn() helper so
disconnected_cb can't free the conn between the null check and
bt_conn_ref/bt_gatt_notify (use-after-unref).
- write_toradio: reject writes that exceed MAX_TO_FROM_RADIO_SIZE with
ATT_ERR_INVALID_ATTRIBUTE_LEN instead of returning success and silently
dropping the payload (would hide failed config writes from the phone).
- start_advertising: truncate the device name to fit the 31-byte legacy
scan-response limit and switch to BT_DATA_NAME_SHORTENED so
bt_le_adv_start() doesn't reject the payload when the name approaches
CONFIG_BT_DEVICE_NAME_MAX=32.
Linker / portability:
- main.h: drop the rp2040Loop() forward declaration that had no
definition and no callers — would surface as a link error if any RP2040
build added a call to the symbol.
- nrf54l15_arduino.cpp: transfer16() now uses static __aligned(4) DMA
buffers (matching transfer()), removing the EasyDMA-reachability hazard
of caller-stack buffers on this part.
Filesystem (InternalFileSystem.h):
- usedBytes(): return real usage from fs_statvfs() instead of 0 so OTA
/ range-test free-space guards work.
- rewindDirectory(): close the dir before reopening — Zephyr fs_dir_t has
no rewind, and re-fs_opendir on an open handle leaks LittleFS state.
Crash handler (nrf54l15_main.cpp):
- After the stack walk, busy-wait 50 ms to flush RTT/printk and call
sys_reboot(SYS_REBOOT_COLD) directly so the saved_crash record is
actually reported on the next boot. Default Zephyr config has
RESET_ON_FATAL_ERROR=n, so the previous k_fatal_halt() spun forever.
Generalization / config:
- PhoneAPI.cpp: replace the NRF54L15_DK ifdef with a
MESHTASTIC_EXCLUDE_FILES_MANIFEST capability flag (defined in the
nrf54l15dk env) so future variants can opt in/out without touching
shared code.
- variants/nrf54l15/nrf54l15.ini: parameterize libdeps include paths via
${PIOENV} so additional nRF54L15 envs sharing nrf54l15_base don't break.
- prj.conf: drop the stale "36 KB storage_partition" comments — the DK
overlay reclaims slot1 to ~700 KB and runtime size comes from
FIXED_PARTITION_SIZE.
- nrf54l15dk overlay: remove the zephyr,console / zephyr,shell-uart
chosen entries that conflicted with CONFIG_UART_CONSOLE=n + RTT
console; keep uart30 enabled so swapping the console is one Kconfig
flip away.
Build: nrf54l15dk SUCCESS (flash 28.6%, RAM 47.4%); wiznet_5500_evb_pico2
SUCCESS (verifies the shared main.h change).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15dk): use PRIVATE_HW (255) for custom_meshtastic_hw_model
Per @thebentern's review: the nRF54L15-DK is a development kit, not a
canonical Meshtastic SKU, so it falls under HardwareModel::PRIVATE_HW
(255) — the same enum value already used at runtime via HW_VENDOR. The
placeholder 132 is removed; no dedicated enum number will be assigned
for DK boards. Slug stays NRF54L15_DK as a human-readable identifier.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix(nrf54l15): unstarve bt_long_wq so SC pairing completes
bt_pub_key_gen() runs the ECC P256 key generation on bt_long_wq. At default
prio=10 (preemptible) and stack=1400 it gets starved by Meshtastic app
threads at boot — sc_public_key stays NULL for minutes, smp_public_key()
defers with SMP_FLAG_PKEY_SEND, and every SC pairing attempt stalls right
after the public-key exchange. iOS shows "Connecting…" forever with no
PIN prompt; bleak/CLI fails the first CCC notify write with
"Protocol Error 0x05: Insufficient Authentication".
Set CONFIG_BT_LONG_WQ_PRIO=0 (highest preemptible, ties with main) and
CONFIG_BT_LONG_WQ_STACK_SIZE=4096 (margin for the P256M driver frames).
Validated E2E with iOS Meshtastic app: bt_smp_pkey_ready fires within ~40 s
of boot, 20 SC Passkey Entry rounds complete with matching pcnf/cfm,
encrypt 0x01 / sec_level 0x04 (Authenticated MITM), bonded=1.
* feat(nrf54l15): hardware I2C bus via TWIM30 + sensor telemetry
Adds the Arduino TwoWire layer for the nRF54L15-DK so Meshtastic's
sensor drivers can talk to external I2C devices over the hardware
TWIM30 peripheral.
Bus binding:
- &uart30 disabled in the board overlay (peripheral instance 30 is
shared between UARTE30 / TWIM30 / SPIM30 — pick one). Console stays
on RTT via CONFIG_RTT_CONSOLE.
- New i2c30_default / i2c30_sleep pinctrl with SDA=P0.03 / SCL=P0.04.
External 4.7 kOhm pull-ups required on both lines.
- &i2c30 enabled at I2C_BITRATE_FAST (400 kHz).
- button_3 (SW3, P0.04) deleted from DTS so the pad can be claimed by
i2c30 pinctrl; SW3 is still wired to the pad on the DK, do not press
it during I2C use or it will short SCL to GND.
Arduino layer:
- src/platform/nrf54l15/Wire.cpp resolves the DT node at compile time
via DEVICE_DT_GET(DT_NODELABEL(i2c30)) and dispatches Arduino's
beginTransmission / write / endTransmission / requestFrom to
i2c_write / i2c_write_read / i2c_read. Buffer is sized to 256 bytes
for forward compatibility with the SE050 secure element on the
custom PCB.
- Wire.h drops the prior compile-only stubs and exposes the real
TwoWire surface.
- Arduino.h: BitOrder becomes an enum (not #define) so Adafruit_BusIO's
`typedef BitOrder BusIOBitOrder;` compiles.
Variant + build flags:
- nrf54l15.ini flips HAS_WIRE / HAS_SENSOR / HAS_TELEMETRY from 0 to 1
and cherry-picks the sensor libs Meshtastic needs (BusIO, Sensor,
BMP280, BME280, INA219/226/260/3221, SHT4X). The full
environmental_base group is avoided because it pulls
Adafruit_SSD1306 / Adafruit_GFX which rely on Arduino pin macros the
Zephyr shim does not implement.
- nrf54l15dk variant.h defines PIN_WIRE_SDA / PIN_WIRE_SCL for parity
with the Arduino convention used by other variants. The actual bus
wiring is fixed by the overlay pinctrl above.
Validated 2026-05-14/15 on the DK with BMP280 @ 0x76 (temperature +
barometric pressure) and INA3221 @ 0x42 (rail voltage / current);
EnvironmentTelemetry / PowerTelemetry packets transmit successfully
over LoRa.
Footprint cost on nrf54l15dk: +45 KB flash, +1.7 KB RAM.
* feat(nodedb): honor USERPREFS for environment telemetry on first boot
installDefaultConfig() now respects two new compile-time prefs:
USERPREFS_CONFIG_ENV_TELEM_UPDATE_INTERVAL
USERPREFS_CONFIG_ENVIRONMENT_MEASUREMENT_ENABLED
The mobile apps enforce a 30 min floor on environment_update_interval
in the settings UI, which makes short-interval bring-up testing of new
sensor hardware painful — you have to wait half an hour for the first
LoRa packet to confirm wiring + driver. With these prefs baked into
the variant, the firmware can ship a freshly-flashed device that
broadcasts on a shorter cadence (e.g. 900 s) the moment storage_partition
is empty.
Both prefs are gated on #ifdef so the behavior is unchanged for any
variant that does not opt in. Documented in userPrefs.jsonc with the
existing telemetry-interval pref block.
* fix(nrf54l15): allow multiple bonded BLE peers
CONFIG_BT_MAX_PAIRED defaults to 1, so once the first peer (e.g. an
iOS phone) has paired and bonded, every subsequent pairing attempt
from a different MAC fails inside bt_keys_get_addr() with no free
key slot — the host returns BT_SECURITY_ERR_KEY_DOES_NOT_EXIST and
the second peer never gets past SMP.
Raise the slot count to 4 so the device can simultaneously hold an
iOS phone, a Windows host, a Linux host, and one spare bond. Add
BT_KEYS_OVERWRITE_OLDEST so that once the table fills, the LRU peer
is evicted on the next pairing rather than rejecting the new peer.
This matches the behavior other Meshtastic ports already provide
(nRF52 uses CONFIG_BT_PERIPHERAL_PRIO_CONN with similar semantics).
Discovered while bringing up the Python CLI on Windows alongside
the existing iOS bond.
* fix(nrf54l15): zero-initialize TwoWire buffers + clang-format Wire
cppcheck on every CI target (esp32s3, rp2040, rp2350, nrf52840, ...) was
failing the build with two `uninitMemberVar` warnings on TwoWire's
constructor: `txBuf` and `rxBuf` (256-byte arrays) were not initialized.
Even though the buffers are only read after txLen/rxLen is set, leaving
them uninitialized is a footgun if any future caller bypasses the
len-set step. Use C++11 value-initialization in the member initializer
list — costs ~512 B of memset at boot, gains a clean cppcheck pass and
defensive-against-future-changes semantics.
Also reformat Wire.{cpp,h} with the project's `.trunk/configs/.clang-format`
config so the Trunk Check Runner passes — clang-format moved the
`<errno.h>` include before the Zephyr-namespaced ones in Wire.cpp and
collapsed two inline overloads to single lines in Wire.h.
* fix(AdminModule): remove dead OUTPUT_GPIO_PIN/GpioOutputModule references
OUTPUT_GPIO_PIN is never defined and modules/GpioOutputModule.h doesn't
exist in the codebase; all #ifdef OUTPUT_GPIO_PIN branches were dead code
introduced by the nRF54L15-DK variant commit. Strips the include, the
output_gpio_enabled OFF→ON/ON→OFF transition logic in handleSetConfig(),
and the digitalRead() reflection in handleGetConfig().
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
|
||
  Ben MeadorsGitHubcopilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>Copilot Autofix powered by AI |
94bb21ecc7 |
2.8: NodeDB shrink, decoupling, and restructuring (#10413)
* 2.8: NodeDB refactor to decouple satellite entries and decrease size * Regen * Refactor node mute handling to use dedicated functions for clarity and consistency * Develop ref * Fix NodeDB review follow-ups Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6b1d6cf6-ed6b-43b6-95cb-8e141757664e Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Address review validation nits Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/6b1d6cf6-ed6b-43b6-95cb-8e141757664e Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Trunk * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * Extract legacy NodeDatabase migration * Fix remaining NodeDB review issues Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/c76b9a5a-7244-4fbc-9ef0-98091d8caaea Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fixes * Trunk * Fix latest review compile follow-ups Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/5198da01-ec4c-4c16-8a09-68b8e6d5d410 Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix cppcheck style warnings Agent-Logs-Url: https://github.com/meshtastic/firmware/sessions/e60287ba-4ece-46e0-83d8-a6d89664c0bb Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Change pointer type for mesh node in set_favorite function * Change pointer types for mesh node references to const in multiple applets * Add NodeDB layout v25 documentation and migration guidelines * Remove tests for uninitialized PacketHistory state due to undefined behavior * Fix code block formatting in copilot instructions --------- Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com> Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |
||
 Clive BlackledgeandGitHub
|
58736f5184 |
fix: add ROUTER_LATE to rebroadcast integrity checks (#9816)
Adds ROUTER_LATE and CLIENT_BASE to preferred rebroadcaster check (skip unsolicited NodeInfo) and prevents ROUTER_LATE from setting rebroadcast mode to NONE, which would silently break relaying. |
||
 JorropoandGitHub
|
beb268ff25 |
Revert "add a .clang-format file (#9154)" (#9172)
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit
|
||
|
JorropoandGitHub
|
0d11331d18 | add a .clang-format file (#9154) | ||
 Eric SeveranceandGitHub
|
1b2dc10e77 |
Calculate hops correctly even when hop_start==0 (#9120)
* Calculate hops correctly even when hop_start==0. * Use the same type (int8_t) in the loop, avoiding signed/unsigned mismatches. * Clarify defaultIfUnknown is returned for encrypted packets. |
||
 Jonathan Bennett
|
63aadba526 | Use IF_SCREEN macro to guard against null screen object | ||
   
|
9da4396c6f |
Multi message storage (#8182)
* First try at multimessage storage and display * Nrf built issue fix * Message view mode * Add channel name instead of channel slot * trunk fix * Fix for DM threading * fix for message time * rename of view mode to Conversations * Reply in thread feature * rename Select View Mode to Select Conversation * dismiss all live fix * Messages from phone show on screen * Decoupled message packets from screen.cpp and cleaned up * Cannedmessage cleanup and emotes fixed * Ack on messages sent * Ack message cleanup * Dismiss feature fixed * removed legacy temporary messages * Emote picker fix * Memory size debug * Build error fix * Sanity checks are okay sometimes * Lengthen channel name and finalize cleanup removal of Broadcast * Change DM to @ in order to unify on a single method * Continue unifying display, also show message status on the "isMine" lines * Add context for incoming messages * Better to say "in" vs "on" * crash fix for confirmation nodes * Fix outbound labels based to avoid creating delays * Eink autoscroll dissabled * gating for message storage when not using a screen * revert * Build fail fix * Don't error out with unset MAC address in unit tests * Provide some extra spacing for low hanging characters in messages * Reorder menu options and reword Respond * Reword menus to better reflect actions * Go to thread from favorite screen * Reorder Favorite Action Menu with simple word modifications * Consolidate wording on "Chats" * Mute channel fix * trunk fix * Clean up how muting works along with when we wake the screen * Fix builds for HELTEC_MESH_SOLAR * Signal bars for message ack * fix for notification renderer * Remove duplicate code, fix more Chats, and fix C6L MessageRenderer * Fix to many warnings related to BaseUI * preset aware signal strength display * More C6L fixes and clean up header lines * Use text aligns for message layout where necessary * Attempt to fix memory usage of invalidLifetime * Update channel mute for adjusted protobuf * Missed a comma in merge conflicts * cleanup to get more space * Trunk fixes * Optimize Hi Rez Chirpy to save space * more fixes * More cleanup * Remove used getConversationWith * Remove unused dismissNewestMessage * Fix another build error on occassion * Dimiss key combo function deprecated * More cleanup * Fn symbol code removed * Waypoint cleanup * Trunk fix * Fixup Waypoint screen with BaseUI code * Implement Haruki's ClockRenderer and broadcast decomposeTime across various files. * Revert "Implement Haruki's ClockRenderer and broadcast decomposeTime across various files." This reverts commit 2f6572177482fe059d37253117fa8f47abdb6310. * Implement Haruki's ClockRenderer and broadcast decomposeTime across various files. Attempt 2! * remove memory usage debug * Revert only RangeTestModule.cpp change * Switch from dynamic std::string storage to fixed-size char[] * Removing old left over code * More optimization * Free Heap when not on Message screen * build error fixes * Restore ellipsis to end of long names * Remove legacy function renderMessageContent * improved destination filtering * force PKI * cleanup * Shorten longNames to not exceed message popups * log messages sent from apps * Trunk fix * Improve layout of messages screen * Fix potential crash for undefined variable * Revert changes to RedirectablePrint.cpp * Apply shortening to longNames in Select Destination * Fix short name displays * Fix sprintfOverlappingData issue * Fix nullPointerRedundantCheck warning on ESP32 * Add "Delete All Chats" to all chat views * Improve getSafeNodeName / sanitizeString code. * Improve getSafeNodeName further * Restore auto favorite; but only if not CLIENT_BASE * Don't favorite if WE are CLIENT_BASE role * Don't run message persistent in MUI * Fix broken endifs * Unkwnown nodes no longer show as ??? on message thread * More delete options and cleanup of code * fix for delete this chat * Message menu cleanup * trunk fix * Clean up some menu options and remove some Unit C6L ifdefines * Rework Delete flow * Desperate times call for desperate measures * Create a background on the connected icon to reduce overlap impact * Optimize code for background image * Fix for Muzi_Base * Trunk Fixes * Remove the up/down shortcut to launch canned messages (#8370) * Remove the up/down shortcut to launch canned messages * Enabled MQTT and WEBSERVER by default (#8679) Signed-off-by: kur1k0 <zhuzirun@m5stack.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> --------- Signed-off-by: kur1k0 <zhuzirun@m5stack.com> Co-authored-by: Riker <zhuzirun@m5stack.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Correct string length calculation for signal bars * Manual message scrolling * Fix * Restore CannedMessages on Home Frame * UpDown situational destination for textMessage * Correct up/down destinations on textMessage frame * Update Screen.h for handleTextMessage * Update Screen.cpp to repair a merge issue * Add nudge scroll on UpDownEncoder devices. * Set nodeName to maximum size * Revert "Set nodeName to maximum size" This reverts commit e254f399256c746b0c82d62475b580d27d4fbbb9. * Reflow Node Lists and TLora Pager Views (#8942) * Add files via upload * Move files into the right place * Short or Long Names for everyone! * Add scrolling to Node list * Pagination fix for Latest to oldest per page * Page counters * Dynamic scaling of column counts based upon screen size, clean up box drawing * Reflow Node Lists and TLora Pager Views (#8942) * Add files via upload * Move files into the right place * Short or Long Names for everyone! * Add scrolling to Node list * Pagination fix for Latest to oldest per page * Page counters * Dynamic scaling of column counts based upon screen size, clean up box drawing * Update exempt labels for stale bot workflow Adds triaged and backlog to the list of exempt labels. * Update naming of Frame Visibility toggles * Fix to scrolling * Fix for content cutting off when from us * Fix for "delete this chat" now it does delete the current one * Rework isHighResolution to be an enum called ScreenResolution * Migrate Unit C6L macro guards into currentResolution UltraLow checks * Mistakes happen - restoring NodeList Renderer line --------- Signed-off-by: kur1k0 <zhuzirun@m5stack.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Riker <zhuzirun@m5stack.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: whywilson <m.tools@qq.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> |
||
|
Ben MeadorsandGitHub
|
661f49ad7a | For our first position send on boot, validate that we have received a fresh position (#9023) | ||
|
Ben MeadorsandGitHub
|
a15d654767 |
Finish deprecating the Repeater role behavior (#8144)
* Finish deprecating the Repeater role behavior * Validate * Fixed bad if/else block * Get your crap together! |
||
 
|
3c25652cdf |
If a packet is heard multiple times, rebroadcast using the highest hop limit (#5534)
* If a packet is heard multiple times, rebroadcast using the highest hop limit Sometimes a packet will be in the TX queue waiting to be transmitted, when it is overheard being rebroadcast by another node, with a higher hop limit remaining. When this occurs, modify the pending packet in the TX queue to avoid unnecessarily wasting hops. * Reprocess instead of modifying queued packet In order to ensure that the traceroute module works correctly, rather than modifying the hop limnit of the existing queued version of the packet, simply drop it ifrom the queue and reprocess the version of the packet with the superior hop limit. * Update protobufs submodule * Merge upstream/develop into overheard-hoptimisation branch Resolved conflicts in: - src/mesh/FloodingRouter.cpp: Integrated hop limit optimization with refactored duplicate handling - src/mesh/MeshPacketQueue.h: Kept both hop_limit_lt parameter and new find() method * Improve method naming and code clarity - Rename findPacket() to getPacketFromQueue() for better clarity - Make code DRY by having find() use getPacketFromQueue() internally - Resolves method overloading conflict with clearer naming * If a packet is heard multiple times, rebroadcast using the highest hop limit Sometimes a packet will be in the TX queue waiting to be transmitted, when it is overheard being rebroadcast by another node, with a higher hop limit remaining. When this occurs, modify the pending packet in the TX queue to avoid unnecessarily wasting hops. * Improve router role checking using IS_ONE_OF macro - Replace multiple individual role checks with cleaner IS_ONE_OF macro - Add CLIENT_BASE support as suggested in PR #7992 - Include MeshTypes.h for IS_ONE_OF macro - Makes code more maintainable and consistent with other parts of codebase * Apply IS_ONE_OF improvement to NextHopRouter.cpp - Replace multiple individual role checks with cleaner IS_ONE_OF macro - Add CLIENT_BASE support for consistency - Include MeshTypes.h for IS_ONE_OF macro - Matches the pattern used in FloodingRouter.cpp * Create and apply IS_ROUTER_ROLE() macro across codebase - Add IS_ROUTER_ROLE() macro to meshUtils.h for consistent router role checking - Update FloodingRouter.cpp to use macro in multiple locations - Update NextHopRouter.cpp to use macro - Include CLIENT_BASE role support * Core Changes: - Add hop_limit field to PacketRecord (17B→20B due to alignment) - Extend wasSeenRecently() with wasUpgraded parameter - Enable router optimization without duplicate app delivery - Handle ROUTER_LATE delayed transmission properly Technical Details: - Memory overhead: ~4000 bytes for 1000 records - Prevents duplicate message delivery while enabling routing optimization - Maintains protocol integrity for ACK/NAK handling - Supports upgrade from hop_limit=0 to hop_limit>0 scenarios * Delete files accdentally added for merge * Trunk formatting * Packets are supposed to be unsigned. Thankfully, it's only a log message. * Upgrade all packets, not just 0 hop packets. * Not just unsigned, but hex. Updating packet log IDs. * Fixed order of operations issue that prevented packetrs from being removed from the queue * Fixing some bugs after testing. Only storing the maximum hop value in PacketRecord which makes sense. Also, updating messaging to make more sense in the logs. * Fixed flow logic about how to handle re-inserting duplicate packets. Removed IS_ROUTER_ROLE macro and replaced it with better isRebroadcaster(). * Add logic to re-run modules, but avoid re-sending to phone. * Refactor how to process the new packet with hops. Only update nodeDB and traceRouteModule. * - Apply changes to both FloodingRouter and NextHopRouter classes to make packets mutable for traceroute - MESHTASTIC_EXCLUDE_TRACEROUTE guard for when we don't want traceroute * Allow MeshPacket to be modified in-place in processUpgradePacket * let's not make a copy where a copy is unncessary. --------- Co-authored-by: Clive Blackledge <clive@ansible.org> Co-authored-by: Clive Blackledge <git@ansible.org> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
9211b1bb4b |
Static memory pool allocation (#7966)
* Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> |
||
|
Ben MeadorsandGitHub
|
e17c50bb86 |
Put guards in place around debug heap operations (#7955)
* Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well |
||
|
Jonathan BennettandGitHub
|
e7741c20e4 | Add LOG_HEAP log type, and more heap debug messages (#7937) | ||
|
Ben MeadorsandGitHub
|
d1d16fc25f |
Make phone queues use a static pointer queue (#7919)
* Make phone queues use a static pointer queue * Static init * Compile time constants now * Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms * Add missing method * Missing methods * Update variant.h |
||
|
Ben MeadorsandGitHub
|
8aef3c44f4 |
Text message rate limiting should return routing error instead (#7365)
* Text message rate limiting should return routing error instead * Proper rooting * Update PhoneAPI.cpp * Update PhoneAPI.cpp |
||
 Chloe BethelandGitHub
|
e722a97987 | Don't use assert() in MeshService to guard queueing packets (#6388) | ||
|
Ben Meadors
|
dc100e4d3e | Cleanup | ||
 Chris DanisandGitHub
|
7f17747d8c |
NodeInfo exchange: don't bother if too far away (#6260)
When we receive a NodeInfo from a new node, if it is more than 2 hops beyond our configured hop limit away from us, don't bother to send a NodeInfo back to it. In my dense urban environment, I see many nodes that are >= 5 hops away, but sending their NodeInfo with a hopStart of 6 or 7. In most cases I can imagine, this seems like a waste of airtime. |
||
+9     Ben MeadorsGitHubgithub-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>GUVWAFGUVWAFThomas GöttgensTom Fifieldmverch67Manueltodd-herbert Jason Murray Jason Murraydependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>Jonathan Bennett Austin virgil Mark Trevor Birss Kalle Lilja rcarteraz |
99d3e5eb70 |
2.6 changes (#5806)
* 2.6 protos
* [create-pull-request] automated change (#5789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Hello world support for UDP broadcasts over the LAN on ESP32 (#5779)
* UDP local area network meshing on ESP32
* Logs
* Comment
* Update UdpMulticastThread.h
* Changes
* Only use router->send
* Make NodeDatabase (and file) independent of DeviceState (#5813)
* Make NodeDatabase (and file) independent of DeviceState
* 70
* Remove logging statement no longer needed
* Explicitly set CAD symbols, improve slot time calculation and adjust CW size accordingly (#5772)
* File system persistence fixes
* [create-pull-request] automated change (#6000)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Update ref
* Back to 80
* [create-pull-request] automated change (#6002)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* 2.6 <- Next hop router (#6005)
* Initial version of NextHopRouter
* Set original hop limit in header flags
* Short-circuit to FloodingRouter for broadcasts
* If packet traveled 1 hop, set `relay_node` as `next_hop` for the original transmitter
* Set last byte to 0xFF if it ended at 0x00
As per an idea of @S5NC
* Also update next-hop based on received DM for us
* temp
* Add 1 retransmission for intermediate hops when using NextHopRouter
* Add next_hop and relayed_by in PacketHistory for setting next-hop and handle flooding fallback
* Update protos, store multiple relayers
* Remove next-hop update logic from NeighborInfoModule
* Fix retransmissions
* Improve ACKs for repeated packets and responses
* Stop retransmission even if there's not relay node
* Revert perhapsRebroadcast()
* Remove relayer if we cancel a transmission
* Better checking for fallback to flooding
* Fix newlines in traceroute print logs
* Stop retransmission for original packet
* Use relayID
* Also when want_ack is set, we should try to retransmit
* Fix cppcheck error
* Fix 'router' not in scope error
* Fix another cppcheck error
* Check for hop_limit and also update next hop when `hop_start == hop_limit` on ACK
Also check for broadcast in `getNextHop()`
* Formatting and correct NUM_RETRANSMISSIONS
* Update protos
* Start retransmissions in NextHopRouter if ReliableRouter didn't do it
* Handle repeated/fallback to flooding packets properly
First check if it's not still in the TxQueue
* Guard against clients setting `next_hop`/`relay_node`
* Don't cancel relay if we were the assigned next-hop
* Replies (e.g. tapback emoji) are also a valid confirmation of receipt
---------
Co-authored-by: GUVWAF <thijs@havinga.eu>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
* fix "native" compiler errors/warnings NodeDB.h
* fancy T-Deck / SenseCAP Indicator / unPhone / PICOmputer-S3 TFT screen (#3259)
* lib update: light theme
* fix merge issue
* lib update: home buttons + button try-fix
* lib update: icon color fix
* lib update: fix instability/crash on notification
* update lib: timezone
* timezone label
* lib update: fix set owner
* fix spiLock in RadioLibInterface
* add picomputer tft build
* picomputer build
* fix compiler error std::find()
* fix merge
* lib update: theme runtime config
* lib update: packet logger + T-Deck Plus
* lib update: mesh detector
* lib update: fix brightness & trackball crash
* try-fix less paranoia
* sensecap indicator updates
* lib update: indicator fix
* lib update: statistic & some fixes
* lib-update: other T-Deck touch driver
* use custom touch driver for Indicator
* lower tft task prio
* prepare LVGL ST7789 driver
* lib update: try-fix audio
* Drop received packets from self
* Additional decoded packet ignores
* Honor flip & color for Heltec T114 and T190 (#4786)
* Honor TFT_MESH color if defined for Heltec T114 or T190
* Temporary: point lib_deps at fork of Heltec's ST7789 library
For demo only, until ST7789 is merged
* Update lib_deps; tidy preprocessor logic
* Download debian files after firmware zip
* set title for protobufs bump PR (#4792)
* set title for version bump PR (#4791)
* Enable Dependabot
* chore: trunk fmt
* fix dependabot syntax (#4795)
* fix dependabot syntax
* Update dependabot.yml
* Update dependabot.yml
* Bump peter-evans/create-pull-request from 6 to 7 in /.github/workflows (#4797)
* Bump docker/build-push-action from 5 to 6 in /.github/workflows (#4800)
* Actions: Semgrep Images have moved from returntocorp to semgrep (#4774)
https://hub.docker.com/r/returntocorp/semgrep notes: "We've moved!
Official Docker images for Semgrep now available at semgrep/semgrep."
Patch updates our CI workflow for these images.
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Bump meshtestic from `31ee3d9` to `37245b3` (#4799)
Bumps [meshtestic](https://github.com/meshtastic/meshTestic) from `31ee3d9` to `37245b3`.
- [Commits](https://github.com/meshtastic/meshTestic/compare/31ee3d90c8bef61e835c3271be2c7cda8c4a5cc2...37245b3d612a9272f546bbb092837bafdad46bc2)
---
updated-dependencies:
- dependency-name: meshtestic
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* [create-pull-request] automated change (#4789)
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com>
* Bump pnpm/action-setup from 2 to 4 in /.github/workflows (#4798)
Bumps [pnpm/action-setup](https://github.com/pnpm/action-setup) from 2 to 4.
- [Release notes](https://github.com/pnpm/action-setup/releases)
- [Commits](https://github.com/pnpm/action-setup/compare/v2...v4)
---
updated-dependencies:
- dependency-name: pnpm/action-setup
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
* Raspberry Pico2 - needs protos
* Re-order doDeepSleep (#4802)
Make sure PMU sleep takes place before I2C ends
* [create-pull-request] automated change
* heltec-wireless-bridge
requires Proto PR first
* feat: trigger class update when protobufs are changed
* meshtastic/ is a test suite; protobufs/ contains protobufs;
* Update platform-native to pick up portduino crash fix (#4807)
* Hopefully extract and commit to meshtastic.github.io
* CI fixes
* [Board] DIY "t-energy-s3_e22" (#4782)
* New variant "t-energy-s3_e22"
- Lilygo T-Energy-S3
- NanoVHF "Mesh-v1.06-TTGO-T18" board
- Ebyte E22 Series
* add board_level = extra
* Update variant.h
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Tom Fifield <tom@tomfifield.net>
* Consolidate variant build steps (#4806)
* poc: consolidate variant build steps
* use build-variant action
* only checkout once and clean up after run
* Revert "Consolidate variant build steps (#4806)" (#4816)
This reverts commit
|
||
|
GUVWAFandGitHub
|
57ea6a265e |
SimRadio: clean-up and emulate collisions (#5487)
* Clean up SimRadio and don't let it use PKC * Add collision emulation for SimRadio * Add stats from SimRadio to LocalStats * Make emulating collisions optional |
||
|
Ben MeadorsandGitHub
|
474f9b5bfb | Clean up some inline functions (#5454) | ||
|
Ben MeadorsandGitHub
|
f769c50fa5 |
More reduction (#5256)
* Now with even fewer ings * Ye * Mo * QMA6100PSensor |
||
|
GUVWAFandGitHub
|
7ba6d97e99 | Release no-LoRa packet after sending to phone (#5254) | ||
|
GUVWAFandGitHub
|
f3b698905d | Disable automatic NodeInfo request when NodeDB is full (#5255) | ||
|
Ben MeadorsandGitHub
|
50dac38a1b |
Pass#2: Lots more savings in logs and string reduction surgery (#5251)
* Pass#2: Lots more savings in logs and string reduction surgery * Don't need Thread suffix either * Warn |
||
|
Tom FifieldandGitHub
|
276067065e |
Log cleanups (#5135)
* Log cleanups change log levels, shorten log messages, delete commented out logs * Address comments from review * Remove full stops * EDEBUG --> DEBUG |
||
|
Ben MeadorsandGitHub
|
03aaaafa13 |
Exclude preferred routing roles from nodeinfo interrogation behavior (#5242)
* Exclude prefered routing roles from nodeinfo interrogation behavior * Exclude prefered routing roles from nodeinfo interrogation behavior * Update MeshService.cpp * Rework logic to prevent spammy router logs |
||
|
|
0a82fd28b3 |
PIO_ENV (#5239)
* add hw_env to packet needs https://github.com/meshtastic/protobufs/pull/616 * rename to pio_env * Move to mynodeinfo * Includy doody --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
|
05e4a639a1 |
remove newline from logging statements. (#5022)
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Tom FifieldandGitHub
|
553e572eb5 |
Coalesce duplicated method GetTimeSinceMeshPacket (#4968)
GetTimeSinceMeshPacket was duplicated in PowerTelemetry and EnvironmentalTelemetry, albeit one had a cooler name than the other. As we add HealthTelemetry, to avoid creating a third instance of this method, let's move it somewhere that makese sense. Adds a new method GetTimeSinceMeshPacket to MeshService and updates EnvironmentTelemetry and PowerTelemetry to use it. |
||
|
|
18f12584ab |
Consolidate and shrink down the re-used strings in logs (#4907)
* Consolidate and shrink down the re-used strings in GPS * Condense all the things --------- Co-authored-by: GUVWAF <thijs@havinga.eu> |
||
|
Ben Meadors
|
a767997cea | Get in the trunk! | ||
|
Ben Meadors
|
861f0b6769 | Add ClientNotification hello world | ||
|
Tom FifieldandGitHub
|
e38aca3cba |
NimbleBluetooth.h is not required in MeshService. (#4419)
There are no calls to the functions defined in Nimble from this class. See also older comment on line 8 about the dream to seperate mesh and bluetooth :) |
||
|
Tom FifieldandGitHub
|
02ae24b6fa |
Remove outdated comments (#4417)
These comments from four years ago no longer reflect how things work. |
||
|
Jonathan BennettandGitHub
|
d2ea430a3e |
Make SPI frequency and TOPHONE queue size configurable on Native (#4369)
* Make SPI frequency configurable on Native * Make the tophone queue size configurable for Portduino * The modified SPISettings must be configured in setup(), after config.yaml is processed * make MeshService a pointer, so we can configure MAX_RX_TOPHONE at run time * Got a little over excited with refactoring * Silence a warning |
||
|
|
9e4ce86c2a |
Let StoreForward server send history to phoneAPI (#4282)
* Send StoreForward history of the server to a connected client To extend the ToPhoneQueue * Add delay after sending history info * Don't allow history request over LoRa on default channel --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> |
||
|
Ben MeadorsandGitHub
|
0fa9974518 | Don't send node info interrogation when ch. util is >25% (#4273) | ||
|
GUVWAFandGitHub
|
86ca81b555 |
If toPhoneQueue is full, still increment fromNum to avoid client never getting packets (#4246)
|
||
|
ManuelandGitHub
|
ae420dcd21 |
Fix exclude macros (#4233)
* fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS |