* NodeDB: 3-tier node store with persistent warm tier (long-tail identity retention)
Introduces a tiered NodeDB so the device retains identity (public key,
last_heard) for far more nodes than fit in the full-record hot store,
without growing heap or the persisted nodes.proto unboundedly.
- Hot store: full NodeInfoLite, MAX_NUM_NODES (120 on nRF52).
- Satellite maps: position/telemetry/environment/status capped at
MAX_SATELLITE_NODES (40 freshest); eviction via enforceSatelliteCaps /
evictSatelliteOverCap.
- Warm tier (WarmNodeStore): 40 B {num,last_heard,public_key} records for
evicted nodes so DMs to/from long-tail nodes keep encrypting/decrypting.
Persisted to /prefs/warm.dat, or on nRF52840 a dedicated 12 KB raw-flash
record-ring below LittleFS (3x4 KB pages; see linker scripts + the
nrf52_warm_region.py post-link guard).
NodeDB::getOrCreateMeshNode now demotes evicted nodes into the warm tier and
re-admits them (restoring key/last_heard). Router PKI decrypt/encode resolve
the peer key via NodeDB::copyPublicKey (hot store, then warm tier).
NodeInfoLite gains snr_q4 (sint32, Q4-encoded dB); the float snr is zeroed on
disk. NodeInfoLite grows 105 -> 112 B; backup 2432 -> 2468 B.
Note: the snr_q4 .proto change still needs to land in the protobufs submodule
(generated header is updated here; submodule pointer left at upstream).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* NodeDB: robust receive + retention for blocked (ignored) nodes
Hardens how ignored/favourite nodes are received over admin and retained,
closing paths where a block could be lost or accidentally cleared.
- Blocking keeps the node's public key (admin set_ignored_node and
addFromContact no longer zero it / drop the warm-tier key), so a blocked
peer stays a verifiable identity.
- set_ignored_node creates the node if absent, so a block by node ID sticks
even for a node we've never heard from (e.g. pushed by a remote admin) with
no NodeInfo or key.
- Eviction protection (favourite/ignored/manually-verified) now also applies to
the load-time hot-store migration and is never undone by cleanupMeshDB, which
previously purged ignored nodes that lacked user info.
- The hot-store migration leaves our own node (index 0) in place and prefers to
demote non-protected nodes, like the runtime eviction scan.
Caps the protected set (favourite + ignored + verified) at MAX_NUM_NODES-2 via
NodeDB::setProtectedFlag(), so at least two evictable slots always remain and
getOrCreateMeshNode can always make room — replacing the previous unconditional
append that could run off the end of the node vector when every node was
protected. A locally-set favourite/ignore that hits the cap reports back to the
phone via a ClientNotification.
Adds test_nodedb_blocked covering the migration, favourite/ignored eviction
protection, ignored-survives-cleanup, and the protected-node cap. The
maintenance methods stay private in production; the test reaches them through a
PIO_UNIT_TESTING-guarded friend shim.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
# Conflicts:
# src/mesh/NodeDB.h
* fix copilot comments
* once again
* WarmNodeStore: fix cppcheck warnings (uninitvar, constVariablePointer)
Zero-initialise `stranded[]` and `seqs[]/order[]` VLAs so cppcheck can
verify there are no unguarded reads of uninitialised memory (the guards
exist but are not visible to static analysis). Mark two local pointers
`const` where the pointed-to entry is never mutated after assignment.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* self-care added to assist 2.7 and 2.8 nodedb migration
* Tidy warm-store/self-care: comments, guards, log + flash cleanup
Style/cleanup pass over the branch (no behavior change except the noted
preprocessor simplifications, which are semantically identical):
- Comments: move function descriptions to the headers, cap in-function
comments at ~3-4 lines, drop leading-number step markers, label stacked
#endif blocks, de-decorate banner comments.
- dumpToLog: fully gate decl + definition + AdminModule call site behind
MESHTASTIC_NODEDB_MIGRATION_VERBOSE so it compiles out when disabled
(~1.2 KB when off).
- mesh-pb-constants: drop the dead nRF52832 WARM_NODE_COUNT branch and trim
the macro docs.
- WarmNodeStore: simplify the redundant `ARCH_NRF52 && NRF52840_XXAA` guards
to `NRF52840_XXAA`, add a kNoPage sentinel for the ring page state.
- Shorten the always-on LOG_WARN strings (~120 B flash).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* more tidying up, aligning with docs and undoing other-arch regressions
* Update protobufs (#19)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* made the migration pathway cleareer
* address copilot review
* fixed a copilot review on a downstream PR.
* Address Copilot review comments for PR #10705 (warmstore/nodedb)
- WarmNodeStore.h: default MIGRATION_VERBOSE to 0 (suppress info-level
chatter on production builds; opt in with =1)
- WarmNodeStore.cpp load(): move memset to top of function so all
failure paths (header-read fail, invalid header) leave entries clear
- WarmNodeStore.cpp save(): replace manual spiLock lock/unlock around
mkdir with LockGuard covering the full SafeFile sequence, matching
the lock discipline in load()
- Router.cpp: memcpy(&p->public_key.bytes, ...) -> memcpy(p->public_key.bytes,
...) — pass decayed uint8_t* rather than pointer-to-array
- AdminModule.cpp: check setProtectedFlag return for PKC auto-favorite;
log cap-refusal warning instead of unconditional "auto-favoriting"
- nrf52_warm_region.py: error message references both v6.ld and v7.ld
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* NodeDB: formatting cleanup (blank lines after preprocessor blocks)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Lukewarm store
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
We set the buffer size to about a byte on NRF52480, less than
other platforms:
esp32.ini: -DSERIAL_BUFFER_SIZE=4096
esp32c6.ini: -DSERIAL_BUFFER_SIZE=4096
nrf52.ini: -DSERIAL_BUFFER_SIZE=1024
However, 115200 baud, like the T1000e uses is about 12 times that
- almost 15 bytes per millisecond.
15 bytes * 200 millisecond (our GPS poll rate) = 3000 bytes, which is longer than our buffer
on the nrf52 platform. This causes "GPS Buffer full" errors on the T1000e
and other devices based on NRF52480 with newer GPS chips.
This patch increases SERIAL_BUFFER_SIZE for nrf52480 to 4096 to align with
other platforms. It keeps the original 1024 for the nrf52832, which has
fewer resources.
Fixes https://github.com/meshtastic/firmware/issues/5767
Jonathan BennettandGitHub
Tom FifieldandGitHub