As reported by @Fastomat, if a user had enabled "Share Phone
Position" in the app, RangeTest did not use this position and
recorded a 0,0 lat/lon.
This change preferences GPS where avaialble, but otherwise
uses the position stored for the node in NodeDB.
fixes https://github.com/meshtastic/firmware/issues/5620
* Very hacky first attempt at usermod ech341
* Fixes and debug printfs
* Move to library version of libpinedio-usb
* Add spidev: ch341 option in meshtasticd config.yaml
* Only check settingsStrings on native
* Use new CH341 code
* Bump ch341 lib
* Cleanup USBHal
* Add ch341 config.d files
* Remove ch341quirk
* Bump to most recent spi-userspace driver
* Add handling for ch341 serial, pid, and vid
* Minor fixes from pio check
* Trunk
* Add include for musl compliance
* Point to upstream libch341
* Remove unnecessary memcpy for PKI crypto
* Update comment s/packet_id/id/
* Create a copy of bytes for each channel decrypt
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
* Added support for the LR1121 radio
Added support for the LR1121 radio, tested as functional with an E80-900M2213S from CDEbyte.
* Swap PNG for PDF
* remove PNG
* put TCXO voltage to 1.8, as in example file
It worked at 1.6v, but ¯\_(ツ)_/¯
* Hopefully this will appease Trunk
* Update rf switch pins and Schematic
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Presently we base the default long name (Meshtastic XXXX) and short
names (XXXX) on a node's MAC address. This works fine, unless you
have a node with no bluetooth, like Portduino.
Our logic for node numbers is also based on MAC address. However,
it has the added feature that it will create a random node number
if the Mac address is no good. The name is always "Meshtastic 0001".
This change switches node names (long and short) to instead rely
on the node number for defaults. For nodes with mac addresses,
there should be no user-visible change. For nodes without, they'll
now have a name other than "Meshtastic 0001".
Fixes https://github.com/meshtastic/firmware/issues/5370
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
- Support TLORA_V3.0. Update of the legendary 2.1_1.6.1 with solar charger, TCXO and IPEX connector.
- 'extra' some short-lived EOL intermediate boards in that range. If possible use T3S3 instead of all of these!
- update trunk to latest version
* Synch minor changes from TFT branch
Includes:
* New nordicnrf52 minor version (10.5.0 --> 10.6.0)
* Optimisations for T_DECK
* preparation for MESH_TAB
* add ext notification module to portduino
---------
Co-authored-by: mverch67 <manuel.verch@gmx.de>
Unset BUTTON_PIN and BUTTON_NEED_PULLUP as the board ships without a user button.
Devices and users expecting a button on GPIO12 have to set [GPIO for user button](https://meshtastic.org/docs/configuration/radio/device/#gpio-for-user-button) to 12 (or any GPIO pin the momentary switch was connected to) to restore functionality.
Signed-off-by: Andrew Yong <me@ndoo.sg>
* Add MACAddress to config.yaml
* Better error handling on native, including failing to launch with blank MAC Address and real hardware.
* Re-arrange Mac Address handling and add MACAddressSource
* Bump portduino to remove macaddr function there
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Ben MeadorsandGitHub
Eric SeveranceandGitHub
Tom FifieldandGitHub
Jonathan BennettandGitHub
📡 WatskeBart 🤖andGitHub
GUVWAFandGitHub
Aaron.LeeandGitHub
AustinandGitHub
André Perdigão GonçalvesandGitHub
Mark Trevor BirssandGitHub
Thomas GöttgensandGitHub
Andrew YongandGitHub
Matthias GranberryandGitHub