* WIP
* ESP8266 SAM fun
* I2S audio / ext. notification module
* Remove
* Protos
* Add use_i2s_as_buzzer from protos
* Fixes
* Stuff
* Thing
* Ext. Notification working(ish)
* Remove SAM commented code
* Trunk upgrade
* Trunk
* Fixes
* Slow not fast... :-|
* T-Deck and T-Watch don't use normal buttons
* Stop ext. notification nagging with touchscreen as well
* Add button gpio back for T-Deck, but guard against long-press during ext. notification
* Ext. notification wrap up
* Better place to guard against long-press false positives
* Adjust default gain and guard against non-i2s devices referencing audio-thread
* Simplify guard logic with a boolean
* Supress uninitMemberVar
* Protos merge got out of wack
* Trunk resolution
* Remove extra crap
* Cleanup and thread-interval
* Default to alert message buzzer and add nag timeout
* Formatting
- only works if we don't have a phone connected, but that is probably dsired
- this will send a copy of device-originating text messgaes to a connected phone. Breaking change.
- this will iterate the tophone queue by deconstructing and reconstructing it every time we look for an ID. Probably also mangles the queue oder since it aborts when a ID is found.
- Can we navigate the packet pool instead? If so, how?
- Let's keep this in draft state for now
* Fix typo in GNSS_MODEL defination and usages for the UC6580
Correct the $CFGSYS init string for the UC6580 to init the receiver for:
GPS L1 & L5 + BDS B1I & B2a + GLONASS L1 + GALILEO E1 & E5a + SBAS
* Reduce GNSS serial traffic on Helted Wireless Tracker
Turn off GSV and NOTIFY __TXT messages as neither are
necessary to Meshtastic operation.
* End wire if we find no i2c devices
* Set tx-power to 0 on nrf bluetooth shutdown
* Change polling interval of PowerFSM to 100ms instead of 10ms
* Guard 3v3
* Fix time lost on the Pico W right after NTP
Shouldn't check for `#ifdef` as it will always be defined, but might be set to 0
* Handle reconnect for Wi-Fi on RP2040
* Update arduino-core for Wi-Fi + FreeRTOS fixes
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Show Wi-Fi frame on screen for all devices with Wi-Fi
* Pico W: Disable mDNS as it's unsupported with FreeRTOS
* Fix printing IP address
* Fix Raspbian build
* Pico W: Initial WiFi support: connects, but freezes after a while
* Update arduino-pico core to fix hang with Wi-Fi
* Add `picow` to workflow since it's different from `pico` now
* Enable IO2 toggling on RAK if the coast is clear
* Guard against monteops target which doesn't use 3V3 pin
* Also check for en_gpio = 0 to avoid re-setting the value
* Add support for the rak10701 board, no touch
* Moved tftblack fillin and changed teh src flags
* Added rak10701 to platformio.ini
* Add USB detection to RAK4631 units.
* Eliminate spurious symbol in comment field.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Add configuration via /etc/meshtastic/config.yaml
* Move example config, support more locations
* Fix config check
* Use access() to check for config file presence
* Throw an error and exit on radio init fail
* Adds error check for reading Bluetooth MAC
* Settle on meshtasticd, add install script
* Shell fixes
* Fine. I'll put it back and then disable you
* Get wrekt, shellchekt
* Firat attempt at adding raspbian CI build
* Tickle the workflow
* Beatings will continue til morale improves
* Permissions are overrated
---------
Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Thomas GöttgensandJonathan Bennett
GUVWAFandThomas Göttgens
Ken McGuireandGitHub
