b3ddeca9d065534fd31b971da759f08dd3f12796
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Ben Meadors
|
515fe8b94f | Clamp bw for malformed use_preset false with empty bandwidth | ||
  
|
d846780a9b |
More fuzz tests and small fixes for the findings (#10864)
* first pass tests * more tests * Fix two crafted-admin-packet crashes found by the E5 fuzzer Both are reachable from an authorized admin (local from==0, admin channel, or PKC) - remote DoS: 1. SIGFPE in LoRa config validation. A set_config LoRaConfig with use_preset=false and bandwidth=0 makes freqSlotWidth 0, so numFreqSlots is 0 and `hash(name) % numFreqSlots` (RadioInterface.cpp) divides by zero. Guard the modulo; the existing channel_num check then rejects/ clamps the config. 2. Stack overflow in Channels::getKey. A SECONDARY channel at the primary slot with an empty PSK recursed into getKey(primaryIndex) forever. Skip the primary-key borrow when chIndex == primaryIndex. Re-enable the E5 admin fuzzer to hit both triggers again (use_preset both ways incl. bandwidth 0, plus the set_channel tag) as regression guards. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Correct fuzz-test invariants after the crash fixes - E5 admin fuzz: node eviction under a filling NodeDB is legitimate, so assert only the bounded-count invariant, not that a specific seed node survives 6000 mutating ops. - TMM blitz: scope off the nodeinfo direct-response send path (it needs a fully-wired MeshService/phone queue the fixture doesn't provide; the deterministic directResponse tests cover it). The crafted-nodenum rate/unknown/position cache stress is unchanged. clod helped too * realistic tests * test: dedup fuzz RNG into shared test/support/DeterministicRng.h The four in-tree fuzz suites (test_fuzz_decode, test_fuzz_packets, test_hop_scaling, test_traffic_management) each carried a byte-identical copy of the seeded 64-bit LCG (rngSeed/rngNext/rngByte/rngRange). Hoist it into one shared header so there is a single generator to reason about and no risk of the copies drifting. static inline keeps per-suite state per translation unit and avoids -Wunused-function for suites that don't use every helper. Also corrects a stale comment in test_traffic_management (the blitz's nodeinfo direct-response path is intentionally left off). No behavioral change: same constants, same per-suite seeds. clod helped too * test: fuzz uncovered ProtobufModule handlers and the MQTT downlink ingress Extend the in-tree fuzz coverage to packet sources that previously had none: - test_fuzz_packets E8/E9/E10: drive PositionModule, DeviceTelemetryModule and NeighborInfoModule at handleReceivedProtobuf directly (via using-shims, bypassing the ProtobufModule reply/send path so no router is needed). The fixture already stands up nodeDB/service/channels, and nodeStatus/powerStatus are auto-initialized in main.cpp, so no new globals are required. Adds a shared fuzzRxHeader() helper for crafting adversarial RX packet headers. - test_fuzz_decode: add meshtastic_KeyVerification to the decode table. The KeyVerification and StoreForward handler paths are documented as decode-level only, with the concrete reason each is intrinsic (private-state gating / PSRAM + self-pointer wiring), not a fixture gap. - test_mqtt: test_receiveFuzzServiceEnvelope blitzes the non-RF broker-push ingress (onReceiveProto) two ways - raw garbage bytes that must fail envelope decode cleanly, and a well-formed ServiceEnvelope wrapping a crafted inner MeshPacket over crafted channel_id/gateway_id - exercising the channel match, isFromUs, XEdDSA receive policy and perhapsDecode chain. Adds a deliverRaw() passthrough to MQTTUnitTest. All under the coverage env (ASan/LSan). No firmware/src changes. Full sweep GREEN 27/27, 544 cases. clod helped too * Harden LoRa/channel config against crafted admin messages; consolidate test helpers Production (review findings on the hot-fuzz crash fixes): - Clamp bandwidth at the source (clampBandwidthKHz) in checkOrClampConfigLora and applyModemConfig so numFreqSlots can never be 0 for any consumer; a bandwidth-0 set_config previously passed validation and re-armed the SIGFPE on the next applyModemConfig. - Guard applyModemConfig's hash % numFreqSlots (the validator's sibling modulo was fixed earlier but this one was still unguarded). - Enforce the primary-channel invariant in Channels::onConfigChanged: a config demoting every slot now re-promotes the stale SECONDARY slot (keeping its key) or restores the default channel if the slot is DISABLED, instead of leaving every getPrimaryIndex() reader on a non-primary slot. The getKey recursion guard stays as defense-in-depth. Tests: - New test/support/MockMeshService.h and AdminModuleTestShim.h replace four byte-identical mocks and three divergent admin shims (test_mqtt's capturing mock is genuinely different and stays). - DeterministicRng.h: add rngFill() (replaces 14 hand-rolled fill loops) and rngEdgeNodeNum() (unifies the three NodeNum boundary pools). - Extract fuzzChannelSettings() shared by the set_channel case and fuzzBeacon. - fuzzBeacon: the un-terminated branch now fills the whole buffer with non-NUL bytes so the strnlen bound is actually stressed (~50% of iterations, not ~4%). - E6 beacon fuzz: replace the TEST_ASSERT_TRUE(true) tautology with real invariants (handler never consumes; offers land in lastReceivedOffer keyed to the sender). - Trim the seven over-long comment blocks flagged against the 1-2 line rule; the FINDINGS trailer moves to this commit message (see production notes). Full native suite GREEN 27/27 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Clamp UTF-8 char length in the emote walkers; add test_fuzz_emotes A TEXT_MESSAGE payload is opaque protobuf bytes, so PB_VALIDATE_UTF8 never screens it - invalid UTF-8 and truncated multi-byte lead bytes reach the emote/width render path verbatim. EmoteRenderer's walkers advanced by utf8CharLen(lead) without clamping to the bytes actually remaining, so a truncated lead (e.g. a lone 0xF0, which claims 4 bytes) near the end of the buffer made getUtf8ChunkWidth's memcpy read past the string. ASan confirms a heap-buffer-overflow READ from measureStringWithEmotes. Add utf8CharLenClamped() and use it at every walk site (width measure, truncation cut-loop, and the draw-path text-run/chunk builders); the one already-guarded site (matchAtIgnoringModifiers) is unchanged. New test/test_fuzz_emotes drives measureStringWithEmotes and truncateToWidth over adversarial byte strings (biased to embed/end in truncated multi-byte leads) in exact-sized heap buffers so any over-read is a hard ASan fault. Its headless display uses a synthetic font (firstChar 0, fontData centered in a large buffer) so the stock OLEDDisplay::getStringWidth - which indexes the font jump table with a signed char and over-reads for any byte >= 0x80 - does not mask the finding. native-suite-count bumped 27 -> 28. Full native suite GREEN 28/28 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> * Keep emote width measurement in-bounds for non-ASCII bytes OLEDDisplay::getStringWidth (the utf8=false path EmoteRenderer uses on default builds) indexes the font jump table by (c - firstChar) with a signed char and no bounds check, so any byte outside printable ASCII - high bytes from UTF-8 text, but also a stray control byte like 0x0A - reads outside the font array. On-device this reads adjacent flash and returns a garbage width; under ASan the test_fuzz_emotes fuzzer flags it as a global-buffer-overflow, and it made the non-ASCII width measurement meaningless either way. The OLED driver is a pinned upstream dependency, so guard it firmware-side in EmoteRenderer's getStringWidth helper: measure a sanitized copy where any byte outside [0x20, 0x7E] counts as a '?' placeholder. Printable ASCII is unchanged and the UA/RU lookup path is untouched. test_fuzz_emotes now drives a real ArialMT font instead of the synthetic in-bounds font it needed before this fix, so the suite exercises the true production width path (utf8CharLen clamp + this sanitizer) end to end. The same fuzzer tripped the global-buffer-overflow before this change. Full native suite GREEN 28/28 under the coverage (ASan/LSan) env. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
TomandGitHub
|
3becaf2d95 | emdashes begone (#10847) | ||
|
Ben MeadorsandGitHub
|
0488a46a3c |
fix: stop unexpected NodeNum regeneration from PKI key loss (#10808)
* fix: stop unexpected NodeNum regeneration from PKI key loss A node's NodeNum is derived from its PKI public key (my_node_num == crc32(public_key)), so it changes only when the keypair is regenerated -- which happens only when a keygen path runs while config.security.private_key.size != 32. Two paths could trigger that without the user intending a new identity: 1. Boot: loadFromDisk() collapsed every non-success loadProto() result for the config file into installDefaultConfig() (preserveKey=false), which memset()s config and wipes the private key. loadProto() distinguishes DECODE_FAILED (file present but undecodable/undecryptable) from OTHER_FAILURE (absent), so a transient/corrupt read silently minted a new identity. A new configDecodeFailed flag now gates the boot keygen and the boot config-save directly (not via region, so it survives the userprefs/region overrides that run later in loadFromDisk): identity is frozen, the unreadable file is left intact for a later clean boot to recover, and the node boots radio-silent (region UNSET, TX off). A genuinely-absent config still gets defaults + keygen. 2. AdminModule security SET: config.security = c.payload_variant.security wholesale-clobbered the keypair, then regenerated whenever the incoming private_key.size != 32. A client editing an unrelated security field without round-tripping the private key would re-mint identity. The existing keypair is now preserved when the incoming config omits it; first provisioning and key import are unchanged. Intentional reset goes through factory_reset. Native PlatformIO unit suite (Docker): 499/499 test cases pass. * test: cover security keypair preservation; clarify load-failure comment Addresses PR review feedback: - Add native unit tests (test_admin_radio) asserting handleSetConfig preserves the existing identity keypair when a security SET omits the private key, and applies a full supplied keypair (key import). Guards against reintroduced NodeNum/keypair regeneration. AdminModuleTestShim (now a friend) defers saves so the lightweight harness doesn't saveToDisk an uninitialized node database. - Clarify the non-DECODE_FAILED config-load comment: OTHER_FAILURE / NO_FILESYSTEM cover an absent or unopenable file, not just first boot. |
||
|
TomandGitHub
|
ab882c5619 |
EU regions merge (#10675)
* stronger together * validate 2.4ghz regions * less noise * you're right, and that shapens the analysis significantly * sassy rejoinder |
||
 nomdetom
|
5d55353939 | Some fixes and tidies for testing both online and in unit_tests | ||
  vidplace7andCopilot
|
178ae0a7f1 |
Move overrideSlot from RegionProfile to RegionInfo (override per-region)
Move default frequency (slot) override from RegionProfile to RegionInfo (set per-region). This is usually set to `0`, but will be especially useful for Ham modes where each region default must fit within a band plan. Co-authored-by: Copilot <copilot@github.com> |
||
|
|
5e69bc6c3f |
Enable Narrow and Lite regions for EU (#10120)
* Enable Lite and Narrow regions and introduce getEffectiveDutyCycle for Lite profiles * Add TrafficType enum and extend getConfiguredOrDefaultMsScaled to manage based on regionProfile settings * Refactor telemetry modules to include TrafficType in getConfiguredOrDefaultMsScaled calls * Update submodule protobufs to latest commit * Add support for new region presets and modem presets in menu options * Add new LoRa region codes and modem presets for EU bands * boof * Add modem presets for LITE and NARROW configurations * Update subproject commit reference in protobufs * Update protobufs * Refactor modem preset definitions to use macro for consistency and clarity * Refactor modem preset cases to use PRESET macro for consistency * fix: update LoRa region code for EU 868 narrowband configuration Co-authored-by: Copilot <copilot@github.com> * Fix test suite failure Co-authored-by: Copilot <copilot@github.com> * Add override slot override - for when one override isn't enough. Co-authored-by: Copilot <copilot@github.com> * address copilot comments --------- Co-authored-by: Copilot <copilot@github.com> |
||
|
22d63fa69c |
Lora settings expansion and validation logic improvement (#9878)
* Enhance LoRa configuration with modem presets and validation logic * Rename bootstrapLoRaConfigFromPreset tests to validateModemConfig for clarity and consistency * additional tidy-ups to the validateModemConfig - still fundamentally broken at this point * Enhance region validation by adding numPresets to RegionInfo and implementing validateRegionConfig in RadioInterface * Add validation for modem configuration in applyModemConfig * Fix region unset handling and improve modem config validation in handleSetConfig * Refactor LoRa configuration validation methods and introduce clamping method for invalid settings * Update handleSetConfig to use fromOthers parameter to either correct or reject invalid settings * Fix some of the copilot review comments for LoRa configuration validation and clamping methods; add tests for region and preset handling * Redid the slot default checking and calculation. Should resolve the outstanding comments. * Add bandwidth calculation for LoRa modem preset fallback in clampConfigLora * Remove unused preset name variable in validateConfigLora and fix default frequency slot check in applyModemConfig * update tests for region handling * Got the synthetic colleague to add mock service for testing * Flash savings... hopefully * Refactor modem preset handling to use sentinel values and improve default preset retrieval * Refactor region handling to use profile structures for modem presets and channel calculations * added comments for clarity on parameters * Add shadow table tests and validateConfigLora enhancements for region presets * Add isFromUs tests for preset validation in AdminModule * Respond to copilot github review * address copilot comments * address null poointers * fix build errors * Fix the fix, undo the silly suggestions from synthetic reviewer. * we all float here * Fix include path for AdminModule in test_main.cpp * Potential fix for pull request finding Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> * More suggestion fixes * admin module merge conflicts * admin module fixes from merge hell * fix: initialize default frequency slot and custom channel name; update LNA mode handling * save some bytes... * fix: simplify error logging for bandwidth checks in LoRa configuration * Update src/mesh/MeshRadio.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com> |