* Protobufs
* Wire up MEDIUM_TURBO modem preset
MEDIUM_TURBO (500 kHz, SF9, CR 4/5) already existed in the protobuf enum but
was never wired into firmware, so selecting it silently fell through to the
LONG_FAST default and rendered an "Invalid" display name.
Add its bw/sf/cr mapping (modemPresetToParams), display name (MediumTurbo/MedT),
PRESETS_STD membership (standard regions only — 500 kHz does not fit EU868's
250 kHz band, so it stays out of PRESETS_EU_868 and is rejected/clamped there),
and the MEDIUM SNR-grading bucket. Includes positive coverage in test_radio,
EU868-reject + US-accept coverage in test_admin_radio and test_mesh_beacon,
the STD preset count 9->10, an extended fuzz range, and the client-spec doc.
* Address review feedback on MEDIUM_TURBO tests
- test_mesh_beacon: assert has_mesh_beacon before checking the invalid preset was
cleared, so the EU868-cleared test can't pass on a dropped message (matches the
existing SHORT_TURBO test).
- test_fuzz_packets: draw modem presets from _ModemPreset_ARRAYSIZE instead of a
hard-coded 17 so the fuzz range tracks future enum additions automatically.
* first pass tests
* more tests
* Fix two crafted-admin-packet crashes found by the E5 fuzzer
Both are reachable from an authorized admin (local from==0, admin channel,
or PKC) - remote DoS:
1. SIGFPE in LoRa config validation. A set_config LoRaConfig with
use_preset=false and bandwidth=0 makes freqSlotWidth 0, so numFreqSlots
is 0 and `hash(name) % numFreqSlots` (RadioInterface.cpp) divides by
zero. Guard the modulo; the existing channel_num check then rejects/
clamps the config.
2. Stack overflow in Channels::getKey. A SECONDARY channel at the primary
slot with an empty PSK recursed into getKey(primaryIndex) forever. Skip
the primary-key borrow when chIndex == primaryIndex.
Re-enable the E5 admin fuzzer to hit both triggers again (use_preset both
ways incl. bandwidth 0, plus the set_channel tag) as regression guards.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Correct fuzz-test invariants after the crash fixes
- E5 admin fuzz: node eviction under a filling NodeDB is legitimate, so
assert only the bounded-count invariant, not that a specific seed node
survives 6000 mutating ops.
- TMM blitz: scope off the nodeinfo direct-response send path (it needs a
fully-wired MeshService/phone queue the fixture doesn't provide; the
deterministic directResponse tests cover it). The crafted-nodenum
rate/unknown/position cache stress is unchanged.
clod helped too
* realistic tests
* test: dedup fuzz RNG into shared test/support/DeterministicRng.h
The four in-tree fuzz suites (test_fuzz_decode, test_fuzz_packets,
test_hop_scaling, test_traffic_management) each carried a byte-identical
copy of the seeded 64-bit LCG (rngSeed/rngNext/rngByte/rngRange). Hoist
it into one shared header so there is a single generator to reason about
and no risk of the copies drifting. static inline keeps per-suite state
per translation unit and avoids -Wunused-function for suites that don't
use every helper. Also corrects a stale comment in test_traffic_management
(the blitz's nodeinfo direct-response path is intentionally left off).
No behavioral change: same constants, same per-suite seeds.
clod helped too
* test: fuzz uncovered ProtobufModule handlers and the MQTT downlink ingress
Extend the in-tree fuzz coverage to packet sources that previously had
none:
- test_fuzz_packets E8/E9/E10: drive PositionModule, DeviceTelemetryModule
and NeighborInfoModule at handleReceivedProtobuf directly (via using-shims,
bypassing the ProtobufModule reply/send path so no router is needed). The
fixture already stands up nodeDB/service/channels, and nodeStatus/powerStatus
are auto-initialized in main.cpp, so no new globals are required. Adds a
shared fuzzRxHeader() helper for crafting adversarial RX packet headers.
- test_fuzz_decode: add meshtastic_KeyVerification to the decode table. The
KeyVerification and StoreForward handler paths are documented as decode-level
only, with the concrete reason each is intrinsic (private-state gating /
PSRAM + self-pointer wiring), not a fixture gap.
- test_mqtt: test_receiveFuzzServiceEnvelope blitzes the non-RF broker-push
ingress (onReceiveProto) two ways - raw garbage bytes that must fail envelope
decode cleanly, and a well-formed ServiceEnvelope wrapping a crafted inner
MeshPacket over crafted channel_id/gateway_id - exercising the channel match,
isFromUs, XEdDSA receive policy and perhapsDecode chain. Adds a deliverRaw()
passthrough to MQTTUnitTest.
All under the coverage env (ASan/LSan). No firmware/src changes. Full sweep
GREEN 27/27, 544 cases.
clod helped too
* Harden LoRa/channel config against crafted admin messages; consolidate test helpers
Production (review findings on the hot-fuzz crash fixes):
- Clamp bandwidth at the source (clampBandwidthKHz) in checkOrClampConfigLora
and applyModemConfig so numFreqSlots can never be 0 for any consumer; a
bandwidth-0 set_config previously passed validation and re-armed the SIGFPE
on the next applyModemConfig.
- Guard applyModemConfig's hash % numFreqSlots (the validator's sibling modulo
was fixed earlier but this one was still unguarded).
- Enforce the primary-channel invariant in Channels::onConfigChanged: a config
demoting every slot now re-promotes the stale SECONDARY slot (keeping its
key) or restores the default channel if the slot is DISABLED, instead of
leaving every getPrimaryIndex() reader on a non-primary slot. The getKey
recursion guard stays as defense-in-depth.
Tests:
- New test/support/MockMeshService.h and AdminModuleTestShim.h replace four
byte-identical mocks and three divergent admin shims (test_mqtt's capturing
mock is genuinely different and stays).
- DeterministicRng.h: add rngFill() (replaces 14 hand-rolled fill loops) and
rngEdgeNodeNum() (unifies the three NodeNum boundary pools).
- Extract fuzzChannelSettings() shared by the set_channel case and fuzzBeacon.
- fuzzBeacon: the un-terminated branch now fills the whole buffer with non-NUL
bytes so the strnlen bound is actually stressed (~50% of iterations, not ~4%).
- E6 beacon fuzz: replace the TEST_ASSERT_TRUE(true) tautology with real
invariants (handler never consumes; offers land in lastReceivedOffer keyed
to the sender).
- Trim the seven over-long comment blocks flagged against the 1-2 line rule;
the FINDINGS trailer moves to this commit message (see production notes).
Full native suite GREEN 27/27 under the coverage (ASan/LSan) env.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Clamp UTF-8 char length in the emote walkers; add test_fuzz_emotes
A TEXT_MESSAGE payload is opaque protobuf bytes, so PB_VALIDATE_UTF8 never
screens it - invalid UTF-8 and truncated multi-byte lead bytes reach the
emote/width render path verbatim. EmoteRenderer's walkers advanced by
utf8CharLen(lead) without clamping to the bytes actually remaining, so a
truncated lead (e.g. a lone 0xF0, which claims 4 bytes) near the end of the
buffer made getUtf8ChunkWidth's memcpy read past the string. ASan confirms a
heap-buffer-overflow READ from measureStringWithEmotes.
Add utf8CharLenClamped() and use it at every walk site (width measure,
truncation cut-loop, and the draw-path text-run/chunk builders); the one
already-guarded site (matchAtIgnoringModifiers) is unchanged.
New test/test_fuzz_emotes drives measureStringWithEmotes and truncateToWidth
over adversarial byte strings (biased to embed/end in truncated multi-byte
leads) in exact-sized heap buffers so any over-read is a hard ASan fault. Its
headless display uses a synthetic font (firstChar 0, fontData centered in a
large buffer) so the stock OLEDDisplay::getStringWidth - which indexes the
font jump table with a signed char and over-reads for any byte >= 0x80 - does
not mask the finding. native-suite-count bumped 27 -> 28.
Full native suite GREEN 28/28 under the coverage (ASan/LSan) env.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* Keep emote width measurement in-bounds for non-ASCII bytes
OLEDDisplay::getStringWidth (the utf8=false path EmoteRenderer uses on default
builds) indexes the font jump table by (c - firstChar) with a signed char and
no bounds check, so any byte outside printable ASCII - high bytes from UTF-8
text, but also a stray control byte like 0x0A - reads outside the font array.
On-device this reads adjacent flash and returns a garbage width; under ASan the
test_fuzz_emotes fuzzer flags it as a global-buffer-overflow, and it made the
non-ASCII width measurement meaningless either way.
The OLED driver is a pinned upstream dependency, so guard it firmware-side in
EmoteRenderer's getStringWidth helper: measure a sanitized copy where any byte
outside [0x20, 0x7E] counts as a '?' placeholder. Printable ASCII is unchanged
and the UA/RU lookup path is untouched.
test_fuzz_emotes now drives a real ArialMT font instead of the synthetic
in-bounds font it needed before this fix, so the suite exercises the true
production width path (utf8CharLen clamp + this sanitizer) end to end. The same
fuzzer tripped the global-buffer-overflow before this change.
Full native suite GREEN 28/28 under the coverage (ASan/LSan) env.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
* fix: stop unexpected NodeNum regeneration from PKI key loss
A node's NodeNum is derived from its PKI public key
(my_node_num == crc32(public_key)), so it changes only when the keypair is
regenerated -- which happens only when a keygen path runs while
config.security.private_key.size != 32. Two paths could trigger that without
the user intending a new identity:
1. Boot: loadFromDisk() collapsed every non-success loadProto() result for the
config file into installDefaultConfig() (preserveKey=false), which memset()s
config and wipes the private key. loadProto() distinguishes DECODE_FAILED
(file present but undecodable/undecryptable) from OTHER_FAILURE (absent), so
a transient/corrupt read silently minted a new identity. A new
configDecodeFailed flag now gates the boot keygen and the boot config-save
directly (not via region, so it survives the userprefs/region overrides that
run later in loadFromDisk): identity is frozen, the unreadable file is left
intact for a later clean boot to recover, and the node boots radio-silent
(region UNSET, TX off). A genuinely-absent config still gets defaults + keygen.
2. AdminModule security SET: config.security = c.payload_variant.security
wholesale-clobbered the keypair, then regenerated whenever the incoming
private_key.size != 32. A client editing an unrelated security field without
round-tripping the private key would re-mint identity. The existing keypair
is now preserved when the incoming config omits it; first provisioning and
key import are unchanged. Intentional reset goes through factory_reset.
Native PlatformIO unit suite (Docker): 499/499 test cases pass.
* test: cover security keypair preservation; clarify load-failure comment
Addresses PR review feedback:
- Add native unit tests (test_admin_radio) asserting handleSetConfig preserves the
existing identity keypair when a security SET omits the private key, and applies a
full supplied keypair (key import). Guards against reintroduced NodeNum/keypair
regeneration. AdminModuleTestShim (now a friend) defers saves so the lightweight
harness doesn't saveToDisk an uninitialized node database.
- Clarify the non-DECODE_FAILED config-load comment: OTHER_FAILURE / NO_FILESYSTEM
cover an absent or unopenable file, not just first boot.
Move default frequency (slot) override from RegionProfile to RegionInfo (set per-region).
This is usually set to `0`, but will be especially useful for Ham modes where each region default must fit within a band plan.
Co-authored-by: Copilot <copilot@github.com>
* Enable Lite and Narrow regions and introduce getEffectiveDutyCycle for Lite profiles
* Add TrafficType enum and extend getConfiguredOrDefaultMsScaled to manage based on regionProfile settings
* Refactor telemetry modules to include TrafficType in getConfiguredOrDefaultMsScaled calls
* Update submodule protobufs to latest commit
* Add support for new region presets and modem presets in menu options
* Add new LoRa region codes and modem presets for EU bands
* boof
* Add modem presets for LITE and NARROW configurations
* Update subproject commit reference in protobufs
* Update protobufs
* Refactor modem preset definitions to use macro for consistency and clarity
* Refactor modem preset cases to use PRESET macro for consistency
* fix: update LoRa region code for EU 868 narrowband configuration
Co-authored-by: Copilot <copilot@github.com>
* Fix test suite failure
Co-authored-by: Copilot <copilot@github.com>
* Add override slot override - for when one override isn't enough.
Co-authored-by: Copilot <copilot@github.com>
* address copilot comments
---------
Co-authored-by: Copilot <copilot@github.com>
* Enhance LoRa configuration with modem presets and validation logic
* Rename bootstrapLoRaConfigFromPreset tests to validateModemConfig for clarity and consistency
* additional tidy-ups to the validateModemConfig - still fundamentally broken at this point
* Enhance region validation by adding numPresets to RegionInfo and implementing validateRegionConfig in RadioInterface
* Add validation for modem configuration in applyModemConfig
* Fix region unset handling and improve modem config validation in handleSetConfig
* Refactor LoRa configuration validation methods and introduce clamping method for invalid settings
* Update handleSetConfig to use fromOthers parameter to either correct or reject invalid settings
* Fix some of the copilot review comments for LoRa configuration validation and clamping methods; add tests for region and preset handling
* Redid the slot default checking and calculation. Should resolve the outstanding comments.
* Add bandwidth calculation for LoRa modem preset fallback in clampConfigLora
* Remove unused preset name variable in validateConfigLora and fix default frequency slot check in applyModemConfig
* update tests for region handling
* Got the synthetic colleague to add mock service for testing
* Flash savings... hopefully
* Refactor modem preset handling to use sentinel values and improve default preset retrieval
* Refactor region handling to use profile structures for modem presets and channel calculations
* added comments for clarity on parameters
* Add shadow table tests and validateConfigLora enhancements for region presets
* Add isFromUs tests for preset validation in AdminModule
* Respond to copilot github review
* address copilot comments
* address null poointers
* fix build errors
* Fix the fix, undo the silly suggestions from synthetic reviewer.
* we all float here
* Fix include path for AdminModule in test_main.cpp
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* More suggestion fixes
* admin module merge conflicts
* admin module fixes from merge hell
* fix: initialize default frequency slot and custom channel name; update LNA mode handling
* save some bytes...
* fix: simplify error logging for bandwidth checks in LoRa configuration
* Update src/mesh/MeshRadio.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Ben MeadorsandGitHub
nomdetom
vidplace7andCopilot
