This reverts commit 391928ed08.
Since esp32_https_server commit e2c9f98, this is no longer necessary.
Also, the esp32-common.ini '-include mbedtls/error.h' causes a build error
under IDF v5 (https://github.com/meshtastic/firmware/pull/9122#issuecomment-4185767085):
<command-line>: fatal error: mbedtls/error.h: No such file or directory
so this change fixes that error.
* Add powerlimits to reconfigured radio settings as well as init settings.
* Refactor preamble length handling for wide LoRa configurations
* Moved the preamble setting to the main class and made the references static
MQTT password was logged in cleartext via LOG_INFO when connecting to
the broker, exposing credentials to anyone with log access. Replace
the password format specifier with a static mask.
Co-authored-by: Patrickschell609 <patrickschell609@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Consolidate SHTs into one class
* Remove separate SHT imports
* Create one single SHTXX sensor type
* Let the SHTXXSensor class handle variant detection
* Minor logging improvements
* Add functions to set accuracy on SHT3X and SHT4X
* Fix variable init in constructor
* Add bus to SHT sensor init
* Update src/modules/Telemetry/Sensor/SHTXXSensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Update src/modules/Telemetry/Sensor/SHTXXSensor.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix accuracy conditions on SHTXX
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Merge upstream
* Add SHT2X detection on 0x40
* Read second part of SHT2X serial number
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
SerialModule's weather station parser divides by velCount and dirCount
to compute wind speed/direction averages. Both counters are only
incremented when their respective sensor readings arrive, but the
division runs whenever gotwind is true (set by EITHER reading) and
the averaging interval has elapsed.
If only WindDir arrives without WindSpeed (or vice versa), or if the
timer fires before any readings accumulate, the division produces
undefined behavior (floating-point divide by zero on embedded = NaN
or hardware fault depending on platform).
Fix: add velCount > 0 && dirCount > 0 guard to the averaging block.
Co-authored-by: Patrickschell609 <patrickschell609@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix MESHTASTIC_EXCLUDE_SCREEN
* mesh-tab map constraints (2 MB PSRAM)
* point MUI commit to the related PR
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Improved flow to make easier
The emojis are intentional! I had minimal LLM input!!!
* try and fix input variable sanitisation
* and again
* again
* Copilot fixed it for me
* copilot didn't fix it for me
* copilot might have fixed it and I broke it by copypasting
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Fix TAG low‑voltage reboot hang after App configuration
* nRF52: Move low-VDD System OFF logic to variant hook
* Addressed review
* serialize SAADC access with shared mutex for VDD and battery reads
* raise LPCOMP wake threshold to ensure rising-edge wake
* Trunk fmt
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* fix(routing): prevent licensed users from rebroadcasting packets from unlicensed or unknown users
* fix(routing): prevent licensed users from rebroadcasting packets to or from unlicensed users
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
The W5100S Ethernet chip has only 4 hardware sockets. On RAK4631
Ethernet gateways with syslog and NTP enabled, all 4 sockets were
permanently consumed (NTP UDP + Syslog UDP + TCP API listener + TCP
API client), leaving none for MQTT, DHCP lease renewal, or additional
TCP connections.
- NTP: Remove permanent timeClient.begin() at startup; NTPClient::update()
auto-initializes when needed. Add timeClient.end() after each query to
release the UDP socket immediately.
- Syslog: Remove socket allocation from Syslog::enable(). Open and close
the UDP socket on-demand in _sendLog() around each message send.
- MQTT: Fix socket leak in isValidConfig() where a successful test
connection was never closed (PubSubClient destructor does not call
disconnect). Add explicit pubSub->disconnect() before returning.
Made-with: Cursor
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
AustinandGitHub
Catalin PatuleaandGitHub
TomandGitHub
Jonathan BennettandGitHub
Ben Meadors
Chloe BethelandGitHub
Kittiwut KhongkaeoandGitHub
Ethac.chenandBen Meadors
Philip LykovandBen Meadors