SHT4X chip recognized as SHT31, registerValue that stores first bytes of chip's serial number did not mach the chip.
Added a serial number match for SHT40 found in a SONOFF SNZB-02P.
* Wait until after GPS lock hold before updating position, if we can.
After the recent patch, we hold lock for a bit before updating the position.
The positions that come in after the hold are genuinely better positions
than what we've been doing before. However, they only come 20 seconds
after we've got lock.
Previously, we would update the local position as soon as we got a lock as well
as at the end of the hold, since a hold was not always possible.
With this patch, if the settings allow, we should skip that first local position update.
Fixes https://github.com/meshtastic/firmware/issues/8029
* Fix falling edge handling.
* spelling
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Congeal lock handling
* Add named constants
* define unit to avoid confusion
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* ifdef, not if.
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Add handling for when we first turn on.
* Don't run if not active
* Reset fixhold
* Logic fixes
* Add path for ACTIVE--> IDLE --> ACTIVE
Previously we only covered HARDSLEEP --> ACTIVE.
* Change hold time to gps_update_interval - 10s
* Update comment
* Add extra buffer to avoid re-starting hold
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Also move RAK3172 and new EBYTE_E77_MBL define to variant.h, as this makes VSCode know about the defines properly...
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Do slightly better at threading the search for GPS hardware
* Formatting and minor logic fix
* Remove now-spam GPS Log messages
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* feat: add adaptive polling intervals to WebServer
Replace fixed 5ms polling with adaptive intervals based on HTTP activity:
- 50ms during active periods (first 5 seconds after request)
- 200ms during medium activity (5-30 seconds)
- 1000ms during idle periods (30+ seconds)
Reduces CPU usage significantly during idle periods while maintaining
responsiveness when handling HTTP requests.
* Fix integer overflow and magic numbers in WebServer
- Handle millis() overflow in getAdaptiveInterval()
- Replace magic numbers with named constants
- Improve code readability and maintainability
* Null out user.id except for sending to phone
* Fix
* Update src/modules/NodeInfoModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Copilot garbage
* This is unnecessary, because we don't stored user.id on userlite
* Don't need this
* Fix warning
* Just alter the protobuf
* Alter protobuf doesn't do anything with the altered data, so let's re-encode it
* Check inputbroker before access
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Handle existing special case for M5STACK_UNITC6L for DIRECT_MSG_ONLY buzz mode
There already exists a special case for M5STACK_UNITC6L.
Modified it to adhere to new DIRECT_MSG_ONLY buzzer mode
* Add new buzzer mode DIRECT_MSG_ONLY to BuzzerModeMenu
* Disable notifications when buzzer mode is DIRECT_MSG_ONLY
* Change alert_message_buzzer in notification module in DIRECT_MSG_ONLY buzz mode
Better comments
* Fixed spelling in debug log
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: nexpspace <4kosjdicx@mozmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Ben Meadors
szlifierandGitHub
Dmitry DubininandGitHub
GUVWAF
AustinandGitHub
ford-jones
Ford JonesandGitHub
