The native test job ran every test_* suite in a single platformio invocation,
so a failure in the growing suite set could land past the viewable log limit.
Build the test programs once, then run the suites grouped by area in sequential
invocations, each with its own JUnit report and collapsible log. The runs share
one build dir, so gcov coverage still accumulates and a single capture holds the
union. Areas are ordered regex rules with a catch-all, so a new suite always runs.
platformio test discovers and runs whatever test_* directories exist, so
it never notices when test/native-suite-count drifts from the actual
directory count. That reconciliation lived only in bin/run-tests.sh, which
CI does not invoke - so a stale or unbumped count sailed through PRs
(develop itself shipped 38 dirs against a 37 file).
Add a standalone suite-count-check job to test_native.yml that mirrors
run-tests.sh's exact counting logic and fails on a mismatch. It runs on
every PR via main_matrix's test-native job, with no build step so it fails
fast. Bump native-suite-count to 38 to match the current suites.
clod helped too
MeshService::injectAsReceived (gated by MESHTASTIC_ENABLE_FRAME_INJECTION, off by default) extends
the portduino SimRadio SIMULATOR_APP path to real hardware: a client-supplied frame, wrapped in a
Compressed envelope on the SIMULATOR_APP portnum, is delivered through the real receive pipeline
(router->enqueueReceivedMessage) as if it arrived off the LoRa chip. It therefore exercises from!=0
enforcement, channel/PKC decryption, remote-admin authorization, and hop/dedup/module dispatch -
paths the toRadio API cannot reach (it forces from=0). from==0 is dropped to match real RX.
This forges over-the-air traffic, so the flag must never ship enabled. Drive it with the
meshtastic-mcp inject_frame tool / cli/meshinject.py. Documents the technique in the agent-facing
copilot-instructions.md + AGENTS.md.
Adds a scheduled (09:00 UTC) run of the CI build off develop that does
everything a workflow_dispatch build does except create a GitHub release.
Instead it refreshes a single, stable firmware-nightly/ folder on
meshtastic.github.io with the current develop build, leaving that folder's
hand-maintained release_notes.md untouched so it can be edited manually.
On a nightly run (the schedule, or a manual nightly=true dispatch) only the
firmware build + gather-artifacts + the new publish-nightly job run; the
tests/docker/wasm/macOS/debian-src/size jobs and the three release jobs are
skipped, so no release or tag is created.
publish-nightly downloads the per-board artifacts, generates the
firmware-<version>.json release manifest and an index.json version pointer
(read by the web-flasher), then publishes to firmware-nightly/ via the same
peaceiris/actions-gh-pages action used for releases. keep_files:false is scoped
to destination_dir, so it clears stale nightly binaries while leaving sibling
release folders untouched; the hand-maintained release_notes.md is fetched and
carried forward first (fail-closed) so it is never clobbered.
* CI: track RAM (.data+.bss) in size reports and gate on per-env budgets
The 2.8.0 nRF52840 heap regression (99% heap in field reports) shipped
invisibly because CI only tracked flash. On nRF52840 the heap arena is the
linker gap after .bss, so every byte of static .data+.bss growth shrinks the
usable heap 1:1 - RAM needs the same guardrails flash already has.
What's added:
- bin/platformio-custom.py emits ram_bytes (.data + .bss from the ELF, via
the toolchain size tool) into each .mt.json manifest. Heap/stack
placeholder sections are deliberately excluded.
- bin/collect_sizes.py records {flash_bytes, ram_bytes} per env;
bin/size_report.py grows RAM and RAM-delta columns in the PR size report.
Older artifacts without ram_bytes (and legacy int-schema baselines)
degrade to "n/a" instead of crashing.
- bin/ram_budgets.json: per-env RAM/flash budgets, enforced only for envs
listed there. Seeded with rak4631: ram 113,000 (current 110,948 + ~2 KB
slack), flash 786,000 (current 765,192 + ~20 KB; the app region is
0x27000..0xEA000 = 798,720 and the image must stay clear of the
warm-store ring guard in extra_scripts/nrf52_warm_region.py).
- New size-budget-gate CI job runs size_report.py --enforce-budgets and
fails the build on violation; the informational firmware-size-report job
now also renders budget usage into the PR comment.
- src/main.cpp: opt-in boot heap watermark (-DMESHTASTIC_HEAP_WATERMARK_CHECK)
logs LOG_ERROR when less than 20% of the heap is free at the end of
setup(). Off by default; skipped on platforms without heap accounting.
How budgets are raised: deliberately, never automatically. If a change needs
more headroom, bump the env's limit in bin/ram_budgets.json in the same PR
and justify the increase in the PR description.
Verified: python3 bin/test_size_scripts.py (23/23 pass, including ram_bytes
parsing, n/a fallback, and over/under/missing-env budget-gate cases).
* Address review: fail the budget gate closed, fix RAM section matching
- size-budget-gate workflow: drop continue-on-error on the manifest
download and the empty-dir fallback, so the job fails when the data it
gates on cannot be fetched.
- size_report.py --enforce-budgets now fails closed on every
missing-data path instead of trivially passing: empty collected sizes,
a budgeted env that was not built, or a manifest without the budgeted
metric. Report-only mode keeps rendering those as n/a.
- load_budgets() rejects zero/negative/non-integer budgets with a clear
error (a typo'd budget could previously crash budget_markdown with
ZeroDivisionError or silently skip the check); the percentage render
keeps a defensive guard for direct callers.
- compute_ram_bytes(): count RISC-V small-data sections (.sdata/.sbss)
and exclude ESP-IDF .rtc.* sections, which live outside the
heap-competing SRAM.
- Trim the heap-watermark comment in main.cpp to two lines.
bin/test_size_scripts.py: 27/27 - the two fail-open assertions are
flipped to fail-closed, with new report-only counterparts plus cases for
empty sizes under enforcement and malformed budgets.
The Python MCP server + hardware test harness that lived under mcp-server/
now has its own home at https://github.com/meshtastic/meshtastic-mcp
(published, versioned independently). Remove the in-tree copy and wire the
firmware repo to the standalone server externally.
- Delete mcp-server/ (96 files) and the 8 harness-coupled AI workflow files
under .claude/commands/ and .github/prompts/ that drove ./mcp-server/
run-tests.sh — those workflows now ship with meshtastic-mcp as skills.
- .mcp.json: register the server via
`uvx --from git+https://github.com/meshtastic/meshtastic-mcp meshtastic-mcp`
instead of a local ./mcp-server/.venv, keeping MESHTASTIC_FIRMWARE_ROOT="."
so the MCP tools still work from this checkout with no local build.
- Repoint the remaining references (AGENTS.md, CLAUDE.md,
.github/copilot-instructions.md, bin/regen-*.sh, docs, Screen.h,
userPrefs.jsonc, test/fixtures/nodedb/README.md, .trunk/configs/.bandit)
at the standalone repo. The MCP tool surface is unchanged — only the
pytest harness moves out; run it from a meshtastic-mcp checkout with
MESHTASTIC_FIRMWARE_ROOT pointed here.
No build/CI/platformio coupling existed, so nothing in the firmware build
changes.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* clarify channel number formatting and fix the fixed-width padded nodeIDs
* use the explicit 0x%08x for packets and nodeIDs throughout
* LLM instructions
Reconciles develop to master's latest renovate values for deps bumped on the
2.7 line but never back-merged, so the develop->master 2.8 promotion (#10777)
doesn't regress them. Done as a value reconcile, not a cherry-pick: several
master commits are superseded (5 device-ui bumps, 2 ststm32 bumps), and
develop's stale archive/refs/tags/ URL form actually blocked renovate from
bumping these (the regex expects archive/<version>.zip).
GitHub Actions:
- actions/checkout v6 -> v7 (35 refs)
- actions/cache v5 -> v6
- actions/github-script v8 -> v9 (3 refs)
- actions/stale v10.2.0 -> v10.3.0
Build / platform:
- alpine 3.23 -> 3.24 (alpine.Dockerfile)
- platformio/ststm32 19.5.0 -> 19.7.0
- platformio/nordicnrf52 10.11.0 -> 10.12.0
Libraries:
- Adafruit SSD1306 2.5.16 -> 2.5.17
- SparkFun MMC5983MA v1.1.4 -> v1.1.5
- Sensirion I2C SCD30 1.0.0 -> 1.1.1
- meshtastic esp8266-oled-ssd1306 6bfd1f1 -> 2e26010
Deliberately excluded:
- meshtastic/device-ui digest: coupled to firmware protobuf/API and develop has
diverged hard (NodeDB v25); left for a separate maintainer bump + visual check.
- libpax: develop uses the mverch67 fork (pinned by Arduino-3.x migration #9122),
master uses dbinfrago -- a fork divergence, not a version bump; not reconciled.
- platform-native digest: develop already at 61067ac (equal to master).
* Document that src/mesh/generated is auto-generated and must not be edited
* Fix esp32s2 build by enabling native USB CDC, add S2 to check matrix (#10799)
* Add ARCH_PORTDUINO_WASM build: meshtasticd in WebAssembly over WebUSB
Compile the full portduino firmware to WebAssembly (Emscripten) so a real node runs in a browser tab or headless Node, driving a LoRa radio over WebUSB through a CH341 — the desktop Ch341Hal path with its libusb backend swapped for a WebUSB one. The native/desktop portduino build is unchanged.
New build env under src/platform/portduino/wasm/ (excluded from the native build_src_filter): WebUSB libpinedio backend, config/FS/region/MAC/PhoneAPI glue, wasm setup/loop, JS WebUSB runtime, and build stubs. bin/build-portduino-wasm.sh runs a standalone cached emcc build to build/wasm/meshnode.{mjs,wasm}.
Six firmware sources gain #ifdef ARCH_PORTDUINO_WASM guards (single-threaded cooperative emscripten_sleep loop, continuous RX, US region default, std RNG, no-popen exec); none affect non-wasm builds.
* PortDuino WASM: CI build job, cross-platform libdeps, configurable adapter
bin/build-portduino-wasm.sh: auto-detect native-macos (macOS) vs native (Linux/CI) libdeps with a NATIVE_ENV override, and use the SAME env's Crypto with an XEdDSA-present guard. Drops the heltec-v3/Crypto borrow — the meshtastic/Crypto pin already ships XEdDSA; the native libdeps cache was just stale. No env pin change.
Add .github/workflows/build_portduino_wasm.yml: build the ARCH_PORTDUINO_WASM target in CI (ubuntu + emsdk, native libdeps) so it can't silently bit-rot; asserts build/wasm/meshnode.{mjs,wasm}.
src/platform/portduino/wasm: add wasm_set_lora_* setters so the JS host can configure any CH341 LoRa adapter (module, USB ids, DIO/TCXO, SPI speed, pins); wasm_config_apply falls back to the MeshToad defaults when unset.
* WASM: build as a first-class [env:wasm] via platform-wasm (retire emcc script)
Replace the standalone emcc build (bin/build-portduino-wasm.sh) with a normal
PlatformIO env, `pio run -e wasm`, using the new meshtastic/platform-wasm
platform (emcc/em++ + Asyncify, the WASM sibling of platform-native). The
portduino WebAssembly node is now built the same way as every other target.
- variants/native/portduino/platformio.ini: add [env:wasm] (platform pinned to
platform-wasm, board wasm). Translates the script's source set into a curated
build_src_filter, the ~30 EXCLUDE_* defines, and the lib set; defines
ARCH_PORTDUINO_WASM in-repo so correctness doesn't hinge on the platform's
board.json.
- extra_scripts/wasm_link_flags.py: the firmware-specific emcc *link* settings
(EXPORT_NAME, EXPORTED_RUNTIME_METHODS, EXPORTED_FUNCTIONS, ASYNCIFY_IMPORTS).
PlatformIO feeds build_flags to compile only, so these must ride LINKFLAGS;
without it the WebUSB Asyncify seam and the JS host's runtime methods are
dropped (the _wasm_* exports survive only via EMSCRIPTEN_KEEPALIVE).
- PortduinoGlue.{h,cpp}: guard the yaml-cpp dependency out of the WASM build
(#ifndef ARCH_PORTDUINO_WASM around the include, emit_yaml/loadConfig/
readGPIOFromYaml). The browser node configures via the wasm_set_lora_* setters
and dead-strips the YAML path; this drops the host yaml-cpp build dependency
entirely. Native is unchanged (guards are inert there).
- portduino_glue_wasm.cpp / portduino_main_wasm.cpp: repair EM_ASM JS that a
formatter had mangled (!== -> != =, regex split) in the prior landing; the
emcc link succeeds regardless, so CI now runs `node --check meshnode.mjs`.
- .github/workflows/build_portduino_wasm.yml: build via `pio run -e wasm`
(artifacts under .pio/build/wasm/), trigger on the shared inputs the env
inherits (root platformio.ini, bin/platformio-*.py).
- NodeDB.cpp: drop the dead ARCH_PORTDUINO_WASM region-default branch (region
now defaults the same as native).
- Crypto renovate pins: add the missing gitBranch so they track upstream.
Output: .pio/build/wasm/meshnode.{mjs,wasm} (ES module, factory createMeshNode).
Verified: pio run -e wasm (against the published platform archive), node --check,
module instantiates in Node with all exports; native-macos + Docker native unit
tests (450/450) still pass.
* Fix name on the Piggystick
* wasm: pin platform-wasm at the GPL-3.0-relicensed commit
platform-wasm's LICENSE was always GPLv3 (matching this firmware), but its
platform.json/README still declared Apache-2.0 (mis-copied from platform-native).
That's fixed upstream in b83fa5b; bump the [env:wasm] pin to it. Build output is
unchanged (license metadata only). Verified: pio run -e wasm against b83fa5b.
* wasm: make reboot() actually restart the node (was a no-op)
In wasm the reboot path is live (main.cpp -> Power::powerCommandsCheck ->
Power::reboot), but Power::reboot's ARCH_PORTDUINO arm tore down SPI/Wire/Serial
and then called the no-op ::reboot() stub — leaving the node running with a dead
radio until the tab was manually reloaded. Triggers include an admin/phone
reboot, factory reset, the "reconfigure failed" path, and the 60 s stuck-TX
hardware watchdog (RadioLibInterface).
- Power::reboot(): add an ARCH_PORTDUINO_WASM arm (before ARCH_PORTDUINO, since
the wasm build defines both) that skips the host teardown and just calls
::reboot(). notifyReboot already let modules persist.
- ::reboot() (glue): hand off to the JS host — browser reloads the tab (NodeDB
state survives via IDBFS, same identity returns); headless calls Module.onReboot
if provided, else logs. Loose !=/== so clang-format doesn't mangle the EM_ASM JS.
- README: document the reboot handoff + the Module.onReboot hook.
Verified: pio run -e wasm + node --check (EM_ASM intact); native-macos unaffected.
* wasm: rename env to native-wasm and run it in the main CI matrix
Rename [env:wasm] -> [env:native-wasm] for consistency with the portduino
native family (native, native-macos, native-tft). The build dir follows to
.pio/build/native-wasm/ (artifact is still meshnode.{mjs,wasm}); the PIOENV
guard in extra_scripts/wasm_link_flags.py, the README, and the companion wrapper
move with it. The board stays `wasm`.
Also wire the build into normal CI: build_portduino_wasm.yml becomes a reusable
workflow (workflow_call) invoked as the `build-wasm` job of main_matrix.yml, so
the WebAssembly node is built like every other platform instead of on a separate
path trigger.
* native-wasm: auto-locate the Emscripten SDK (pre-build script)
`pio run -e native-wasm` failed with "emcc not found" whenever it was invoked
from a shell that hadn't sourced emsdk_env.sh — a VS Code task, an IDE build
button, a bare terminal. Add a pre: extra script that probes the usual emsdk
locations ($EMSDK_ENV, $EMSDK, ~/emsdk, ./.emsdk, the sibling companion
checkout), sources emsdk_env.sh, and imports the resulting environment so the
platform builder and emcc see PATH/EMSDK/EM_CONFIG. No-op when emcc is already
reachable (CI), silent when no SDK is found (the platform emits its own error).
* wasm: address PR review feedback
- js/bridge.js: import CH341 from "./ch341.js" (sibling in this layout), not
"../src/ch341.js" which doesn't resolve here.
- js/ch341.js: a zero-length transferIn while MISO bytes are still outstanding
now throws instead of breaking out with a partially-filled buffer — silent SPI
corruption becomes a loud error, matching the comment above it.
- libpinedio_webusb.c: webusb_set_auto_cs honors the AUTO_CS option (? 1 : 0)
instead of the always-on ? 1 : 1. Runtime behavior is unchanged — Ch341Hal sets
AUTO_CS=0 right after pinedio_init (RadioLib drives the active-low NSS); the
option just isn't set yet at init, so this now correctly defaults off.
- SX126xInterface.cpp: the RX-start error log now names the method actually
called (startReceive vs startReceiveDutyCycleAuto) instead of hardcoding the
duty-cycle name in the WASM branch.
* native-wasm: drop the emsdk bootstrap shim (now in platform-wasm)
The Emscripten SDK auto-location moved into the platform-wasm builder, so the
firmware no longer needs its own pre: extra script. Remove
extra_scripts/wasm_emsdk_env.py and bump the platform pin to the build that
carries the bootstrap. The wasm_link_flags.py post script stays — those exported
fns / runtime methods / Asyncify import seam are firmware-app-specific.
* wasm: use the canonical companion name (meshtasticd-wasm-node)
The companion repo was renamed meshtastic-web-node -> meshtasticd-wasm-node; fix
the stale name in the wasm README and bump the platform pin to the build that
promotes the canonical name in its emsdk auto-location.
* wasm: re-entrancy guard for the API/region entry points + flaky-open retry
Two robustness fixes for the browser node:
- Re-entrancy guard. The node is single-threaded + Asyncify: while setup()/loop()
is suspended inside a WebUSB transfer, the JS event loop is free, so a stray
DOM/timer callback that re-enters a wasm_* entry point starts a second Asyncify
unwind ("async operation already in flight" abort) or clobbers shared PhoneAPI
state (observed as a "PhoneAPI::available unexpected state" flood). Add a
g_wasm_in_firmware flag set around setup()/loop() (portduino_main_wasm.cpp); the
wasm_set_region / wasm_api_to_radio / wasm_api_from_radio / wasm_api_available
entry points now reject a mid-tick call (return busy) instead of corrupting or
aborting. The host must still call them between ticks — this is the safety net
the design lacked, not a substitute for the JS queue.
- CH341 open retry (js/bridge.js). First-connect WebUSB is flaky — the interface
is briefly unclaimable right after the grant, or held by a prior session,
giving a transient "Could not open SPI: -1". Retry the open with a short
backoff, closing the device between attempts so claimInterface starts clean.
* wasm: exclude emscripten-only sources from cppcheck
The `check` board matrix runs `pio check` (cppcheck) over all of src/,
including src/platform/portduino/wasm/. cppcheck can't parse the EM_ASYNC_JS/
EM_JS macros (Syntax Error: AST broken at libpinedio_webusb.c:39,
internalAstError) and these sources are not part of any checked board build
([env:native-wasm] is board_level=extra, compiled by the build-wasm CI job).
Suppress the wasm dir in suppressions.txt, the same way generated/ and .pio/
are already excluded.
* wasm: coalesce FS.syncfs so two never run at once
IDBFS syncfs is async; the explicit wasm_fs_sync (5s timer + post-save +
beforeunload) could overlap a prior in-flight sync, warning "2 FS.syncfs
operations in flight at once". Serialize: if a sync is running, mark a pending
re-sync and let the in-flight one chain it on completion — at most one in flight,
trailing writes still flushed. (Companion drops IDBFS autoPersist so this is the
single persistence path.)
* wasm: silence false-positive SAST on the emscripten glue
- extra_scripts/wasm_link_flags.py: restore the trunk-ignore-all(ruff/F821,
flake8/F821) header every other SCons extra_script carries; Import/env are
SConscript-injected globals, so ruff/flake8 flag them as undefined.
- .semgrepignore: exclude src/platform/portduino/wasm/js/ (browser WebUSB glue,
not part of the firmware binary). The unsafe-formatstring rule false-positives
on its benign retry/diagnostic console logs.
* Update .github/workflows/build_portduino_wasm.yml
Co-authored-by: Austin <vidplace7@gmail.com>
---------
Co-authored-by: Austin <vidplace7@gmail.com>
* NodeDB: 3-tier node store with persistent warm tier (long-tail identity retention)
Introduces a tiered NodeDB so the device retains identity (public key,
last_heard) for far more nodes than fit in the full-record hot store,
without growing heap or the persisted nodes.proto unboundedly.
- Hot store: full NodeInfoLite, MAX_NUM_NODES (120 on nRF52).
- Satellite maps: position/telemetry/environment/status capped at
MAX_SATELLITE_NODES (40 freshest); eviction via enforceSatelliteCaps /
evictSatelliteOverCap.
- Warm tier (WarmNodeStore): 40 B {num,last_heard,public_key} records for
evicted nodes so DMs to/from long-tail nodes keep encrypting/decrypting.
Persisted to /prefs/warm.dat, or on nRF52840 a dedicated 12 KB raw-flash
record-ring below LittleFS (3x4 KB pages; see linker scripts + the
nrf52_warm_region.py post-link guard).
NodeDB::getOrCreateMeshNode now demotes evicted nodes into the warm tier and
re-admits them (restoring key/last_heard). Router PKI decrypt/encode resolve
the peer key via NodeDB::copyPublicKey (hot store, then warm tier).
NodeInfoLite gains snr_q4 (sint32, Q4-encoded dB); the float snr is zeroed on
disk. NodeInfoLite grows 105 -> 112 B; backup 2432 -> 2468 B.
Note: the snr_q4 .proto change still needs to land in the protobufs submodule
(generated header is updated here; submodule pointer left at upstream).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* NodeDB: robust receive + retention for blocked (ignored) nodes
Hardens how ignored/favourite nodes are received over admin and retained,
closing paths where a block could be lost or accidentally cleared.
- Blocking keeps the node's public key (admin set_ignored_node and
addFromContact no longer zero it / drop the warm-tier key), so a blocked
peer stays a verifiable identity.
- set_ignored_node creates the node if absent, so a block by node ID sticks
even for a node we've never heard from (e.g. pushed by a remote admin) with
no NodeInfo or key.
- Eviction protection (favourite/ignored/manually-verified) now also applies to
the load-time hot-store migration and is never undone by cleanupMeshDB, which
previously purged ignored nodes that lacked user info.
- The hot-store migration leaves our own node (index 0) in place and prefers to
demote non-protected nodes, like the runtime eviction scan.
Caps the protected set (favourite + ignored + verified) at MAX_NUM_NODES-2 via
NodeDB::setProtectedFlag(), so at least two evictable slots always remain and
getOrCreateMeshNode can always make room — replacing the previous unconditional
append that could run off the end of the node vector when every node was
protected. A locally-set favourite/ignore that hits the cap reports back to the
phone via a ClientNotification.
Adds test_nodedb_blocked covering the migration, favourite/ignored eviction
protection, ignored-survives-cleanup, and the protected-node cap. The
maintenance methods stay private in production; the test reaches them through a
PIO_UNIT_TESTING-guarded friend shim.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
# Conflicts:
# src/mesh/NodeDB.h
* fix copilot comments
* once again
* WarmNodeStore: fix cppcheck warnings (uninitvar, constVariablePointer)
Zero-initialise `stranded[]` and `seqs[]/order[]` VLAs so cppcheck can
verify there are no unguarded reads of uninitialised memory (the guards
exist but are not visible to static analysis). Mark two local pointers
`const` where the pointed-to entry is never mutated after assignment.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* self-care added to assist 2.7 and 2.8 nodedb migration
* Tidy warm-store/self-care: comments, guards, log + flash cleanup
Style/cleanup pass over the branch (no behavior change except the noted
preprocessor simplifications, which are semantically identical):
- Comments: move function descriptions to the headers, cap in-function
comments at ~3-4 lines, drop leading-number step markers, label stacked
#endif blocks, de-decorate banner comments.
- dumpToLog: fully gate decl + definition + AdminModule call site behind
MESHTASTIC_NODEDB_MIGRATION_VERBOSE so it compiles out when disabled
(~1.2 KB when off).
- mesh-pb-constants: drop the dead nRF52832 WARM_NODE_COUNT branch and trim
the macro docs.
- WarmNodeStore: simplify the redundant `ARCH_NRF52 && NRF52840_XXAA` guards
to `NRF52840_XXAA`, add a kNoPage sentinel for the ring page state.
- Shorten the always-on LOG_WARN strings (~120 B flash).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* more tidying up, aligning with docs and undoing other-arch regressions
* Update protobufs (#19)
Co-authored-by: NomDeTom <116762865+NomDeTom@users.noreply.github.com>
* made the migration pathway cleareer
* address copilot review
* fixed a copilot review on a downstream PR.
* Address Copilot review comments for PR #10705 (warmstore/nodedb)
- WarmNodeStore.h: default MIGRATION_VERBOSE to 0 (suppress info-level
chatter on production builds; opt in with =1)
- WarmNodeStore.cpp load(): move memset to top of function so all
failure paths (header-read fail, invalid header) leave entries clear
- WarmNodeStore.cpp save(): replace manual spiLock lock/unlock around
mkdir with LockGuard covering the full SafeFile sequence, matching
the lock discipline in load()
- Router.cpp: memcpy(&p->public_key.bytes, ...) -> memcpy(p->public_key.bytes,
...) — pass decayed uint8_t* rather than pointer-to-array
- AdminModule.cpp: check setProtectedFlag return for PKC auto-favorite;
log cap-refusal warning instead of unconditional "auto-favoriting"
- nrf52_warm_region.py: error message references both v6.ld and v7.ld
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* NodeDB: formatting cleanup (blank lines after preprocessor blocks)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Lukewarm store
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* ci(test report): drop no-status testsuites from the PlatformIO report
PlatformIO emits a self-closing <testsuite tests="0"/> row for every test_*
dir x every hardware variant it can't run on native (~4900 rows). They carry
no pass/fail/skip status and bury the suites that actually ran in the dorny
Test Report. Strip them (in generate-reports, before the reporter) so the
report shows only real results. The uploaded artifact keeps the full XML.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* Add bin/run-tests.sh: standardised local test verdict
Self-contained RED/AMBER/GREEN runner: matches all pass/fail spellings and
cross-checks the suite count against test/test_*/ so a missing suite shows AMBER.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* run-tests.sh: detect sanitizer faults + live build/test progress
Two usability improvements to the local verdict script:
1. Sanitizer-fault detection. A sanitizer-instrumented (coverage) build aborts
non-zero at EXIT on an ASan/LSan/UBSan/TSan fault — most often a LeakSanitizer
leak — AFTER every test has printed [PASSED], so pio reports it as
[ERRORED]/SIGHUP with no :FAIL: anywhere and it masquerades as a phantom
failure. verdict_red now recognises the documented fault signatures (ERROR:/
WARNING: <San>:, SUMMARY: <San>:, Direct/Indirect leak of, heap-use-after-free,
runtime error:, etc. — not the benign "failed to intercept" startup noise) and
reports e.g. "RESULT: RED sanitizer fault — SUMMARY: AddressSanitizer: ...",
plus the "run the binary bare (gdb hides it via ptrace)" recipe. Also flags the
"all tests passed but aborted at exit" shape when the report was swallowed.
2. Progress trail. Long rebuilds were silent for minutes. A background heartbeat
now appends a status line every few seconds to .pio/build/<env>/.runtests-progress
(always — tail -f it to check a backgrounded/piped run) and live-updates the tty
for interactive --quiet runs: build = objects recompiled / cached total + ETA;
test = suites done / expected. The object-count baseline is cached per env in the
gitignored build dir. Writes never touch the parsed verdict log; tty writes are
guarded so a no-tty run emits no redirect-open error.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* fix the fix
* Address Copilot review: add EXIT trap and clarify PKC comment
Add `trap` to kill meshtasticd on any early exit (python harness
failure, socket timeout) so CI never leaks a background process.
Reword the ARCH_PORTDUINO comment to make explicit that pki_encrypted=true
causes the from==0 plain-admin branch to be skipped, routing into the
PKC key-check — the underlying logic was correct all along.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Update PORTDUINO comment to reflect from==0 auth fix
The from==0 branch no longer requires !pki_encrypted (fixed upstream
in this branch), so update the simulator comment to reflect the actual
remaining reason for the early intercept: is_managed could still block
exit_simulator even for local packets.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Current release tags are actually based upon the latest state of `develop` currently...
Specify target_commitish to always use the commit that triggered the build
2026-05-21 06:09:57 -05:00
Ben MeadorsGitHubcopilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
* Add TCP support for Meshtastic MCP interface / tests and update docs
* Address TCP endpoint validation and error handling in connection
* TCP connection handling and device listing logic
* Fix docstring formatting in normalize_tcp_endpoint function
Ben MeadorsandGitHub
nomdetom
Thomas Göttgens
TomandGitHub
