* Make phone queues use a static pointer queue
* Static init
* Compile time constants now
* Instead, lets just use the normal pointerqueue for linux native builds and static for IoT platforms
* Add missing method
* Missing methods
* Update variant.h
Further to https://github.com/meshtastic/firmware/pull/7897 ,
there was another log line that was triggering indiscriminantly on
GPS_INTERVAL_THRESHOLD .
Rather than logging a bad time 4000 times, let's just log one good time
when it is set.
- Fix esptool detection to use 'version' subcommand instead of no arguments
- Fix device-update.bat to use 115200 bps for flashing, 1200 bps only for reset
- Add missing closing quotes in debug messages
Replace magic numbers with named constants for better maintainability
- Add RESET_BAUD=1200 constant for reset baud rate
- Add UPDATE_OFFSET=0x10000 constant for update flash offset
- Use constants instead of hardcoded values throughout script
Extract magic numbers to constants in shell scripts for consistency
- Add FLASH_BAUD, RESET_BAUD, UPDATE_OFFSET constants to device-update.sh
- Add RESET_BAUD, FIRMWARE_OFFSET constants to device-install.sh
- Replace hardcoded values with named constants throughout
- Maintain consistency with batch script improvements
Fix Python path quoting and remove unreachable code
- Quote Python interpreter paths to handle spaces in paths like 'C:\Program Files\Python\python.exe'
- Remove unreachable GOTO statements after EXIT /B commands
- Improve robustness when custom Python interpreters are specified
Fix esptool detection for pipx installations
- Change from checking ERRORLEVEL GEQ 2 to EQU 9009
- Pipx-installed esptool returns exit code 2 when showing help (normal)
- Only treat Windows 'command not found' error (9009) as truly not found
- Add debug output to show actual exit codes for troubleshooting
* chore(deps): update meshtastic/device-ui digest to 10f0244 (#7840)
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* use branch of ina3221 library with fixes
* using commit hash instead of branch name
---------
Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com>
* Add initial variant and platformio configuration for RAK WISMESHTAP V2
* Add initial variant and platformio configuration for rak wismesh tap v2
* Remove unnecessary Meshtastic build flags from rak_wismesh_tap_v2 configuration
* Enable LGFX button support in rak_wismesh_tap_v2 configuration
* Revert "Enable LGFX button support in rak_wismesh_tap_v2 configuration"
This reverts commit 2bd2c1a03b1b8a224c440049b7aff8a15bb54dbf.
---------
Co-authored-by: Daniel.Cao <daniel.cao@rakwireless.com>
* Show ExternalNotification as excluded if it is
* Enable ExternalNotification, SerialModule and RangeTest on STM32WL
* Misc fixes for #7797 - ARCH_STM32 -> ARCH_STM32WL, use less flash by dropping weather station support for serialmodule, set tx/rx pins before begin
* Enable Serial1 on RAK3172, make SerialModule use it (console is on LPUART1)
* Fix SerialModule on RAK3172, fix board definition of RAK3172 to include the right pin mapping.
Ben MeadorsandGitHub
Jonathan BennettandGitHub
Tom FifieldandBen Meadors
ManuelandGitHub
HarukiToredaandBen Meadors
GUVWAFandGitHub
Jeremiah KandGitHub
Sam DuffieldandBen Meadors
Chloe BethelandBen Meadors
TNandBen Meadors
Andrew YongandGitHub
