GUVWAF and GitHub
4594ae474e
Upon receiving ACK/reply directly, only update next-hop if we’re the *sole* relayer ( #7859 )
2025-09-06 06:23:43 -05:00
GUVWAF and Ben Meadors
a25bfd264c
Only stop retransmissions when receiving implicit ACK over LoRa ( #7872 )
...
* Only stop retransmissions when receiving implicit ACK over LoRa
* trunk fmt
2025-09-05 12:00:23 -05:00
Ben Meadors
8356ad97e4
Cleanup file list
2025-09-05 07:18:29 -05:00
89de499198
Update protobufs ( #7855 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-09-04 07:32:59 -05:00
Chloe Bethel and Ben Meadors
5b63bd9331
Add RF switch settings for STM32WL variants ( #7813 )
...
* Add RF switch settings for STM32WL variants
* Shuffle ifdefs in STM32WLE5JCInterface to make it not get built by other targets
2025-09-04 06:38:05 -05:00
8a8f60d129
Update protobufs ( #7831 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-09-02 19:08:05 -05:00
Jason P and Ben Meadors
cfc1bf10c9
If usePreset is False, show value as Custom ( #7812 )
2025-09-02 06:05:55 -05:00
Ben Meadors and GitHub
4e03df5ea7
Fix freetext hang ( #7781 )
...
* Fixed freetext hangs by adding canned modules back to self-sourced packets and transition to SENDING_ACTIVE state
* Update meshmodule handling
2025-08-29 12:09:22 -05:00
Ben Meadors
237b8908f7
Chainsaw took too much off the top
2025-08-27 09:54:39 -05:00
Ben Meadors
06bccef462
Reinstitute previous streamapi readStream
2025-08-27 07:17:46 -05:00
0903ed8232
Mesh solar integrate ( #7764 )
...
* Added HELTEC MeshSolar board. (#7499 )
* Added HELTEC MeshSolar board.
* Set emergency shutdown pin as high impedance
* Set emergency shutdown pin as high impedance
Set emergency shutdown pin as high impedance
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update variants/nrf52840/heltec_mesh_solar/variant.h
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update I2C SCL pin definition in variant.h
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Updates
---------
Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com >
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
2025-08-27 06:02:54 -05:00
3f5c30e3b3
T-Lora Pager ( #7613 )
...
* initial commit
* preset rotary1 encoder
* define TAB+ESC
* haptic feedback
* allow switch off haptic feedback
* enable audio amplifier
* include PR4684
* fix for tft target
* add ES8311 audio codec
* fix KB scan duplicate
* display workaround to avoid debris
* fix debris on display
* keyboard backlight
* enable screen options
* fsm based bounce-free rotary encoder implementation
* use fsm RotaryEncoder only for T-Lora Pager
* change inputbroker default config to allow using rotary wheel for screens AND menues
---------
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com >
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
2025-08-26 09:35:25 -05:00
Jonathan Bennett and GitHub
915f882e1f
Pkc fix ( #7722 )
2025-08-24 10:13:18 -05:00
Jonathan Bennett and GitHub
ce75bf4496
Initial stab at rak6421 autoconf ( #7691 )
...
* Initial stab at rak6421 autoconf
* trunk
* Add crc check to eeprom autoconf
* Trunk again
2025-08-20 14:18:20 -05:00
890357d579
Update protobufs ( #7693 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-08-20 05:53:20 -05:00
Jonathan Bennett and GitHub
5de61b1a3d
Only gate PKC behind the simradio CLI flag ( #7681 )
...
* Only gate PKC behind the simradio CLI flag
* Hide router.cpp simradio check behind #if ARCH_PORTDUINO
2025-08-19 14:15:05 -05:00
e55084629a
Move heartbeat response before !available guard. ( #7672 )
...
* Move heartbeat response before !available guard.
* fix formatting.
---------
Co-authored-by: Jake-B <jake-b@users.noreply.github.com >
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
2025-08-19 08:10:53 -05:00
f65e2c639e
Update protobufs ( #7679 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-08-19 05:35:25 -05:00
Jonathan Bennett and GitHub
95200e8f6b
Adds rfswitch on Portduino ( #7663 )
...
* Initial attempt to get rfswitch working on Portduino
* Make portduino_config global
2025-08-18 16:33:52 -05:00
Jonathan Bennett and GitHub
e5e8683cdb
Don't update the NodeDB if the nodeinfo has a mismatching public key ( #7652 )
2025-08-17 05:56:06 -05:00
0046d957f1
Update protobufs ( #7647 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-08-15 21:42:51 +02:00
GUVWAF and GitHub
8d5ae1d5d2
Fix marking LoRa transport mechanism ( #7634 )
2025-08-15 19:09:25 +02:00
ddd149945a
More spoof remediation ( #7612 )
...
* More spoof remediation
* Fix signed comparison error
* Only fire self-bound messages into the routing module
* Update src/mesh/MeshModule.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* String const
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
2025-08-12 16:08:03 -05:00
Jonathan Bennett and GitHub
e26de85b5f
Mark meshPackets based on which interface received. ( #7589 )
2025-08-11 21:47:04 -05:00
Ben Meadors
f6857f1bcb
Heartbeat has a nonce now
2025-08-09 10:17:08 -05:00
7fe2c74139
Update protobufs ( #7588 )
...
Co-authored-by: jp-bennett <5630967+jp-bennett@users.noreply.github.com >
2025-08-09 09:14:22 -05:00
be60f9612e
Update protobufs ( #7587 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-08-09 08:14:04 -05:00
Jonathan Bennett and GitHub
8568b56ac6
Fix a crash on Native reboot ( #7570 )
2025-08-07 12:28:01 -05:00
Jonathan Bennett and GitHub
27c6b24e3a
Rather than mysteriously rebooting, regenerate the keys and infrom the user. ( #7558 )
2025-08-05 19:53:25 -05:00
Tom Fifield and GitHub
4c901033b2
Workaround Webserver needing to stay up while Wifi is turned off ( #7484 )
...
Expertly triaged by @philon- , turning off wifi using the HTTP API
did not work. That was because we only served the HTTP API if Wifi
was deemed to be available, but mid-way through turning it off Wifi
was still available, but the configuration we were checking said it wasn't.
This patch introduces an additional way the system can determine if Wifi
is available, by referring to the WiFi.status(). This means that in that
limbo state where Wifi has been set to be turned off, but the configuration
has not been saved and it is still up, the HTTP API will stay up long enough
to save the configuration.
Fixes https://github.com/meshtastic/firmware/issues/6965
2025-07-30 07:47:00 -05:00
Ben Meadors and GitHub
7d926da98c
Heartbeat response ( #7506 )
...
* Heartbeat response
* Move it
* Add debug log for visibility
2025-07-30 07:40:27 -05:00
1b793d1f23
Update protobufs ( #7508 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-07-30 06:29:03 -05:00
b5a8e8f51b
DEBUG_MUTE correctness ( #7492 )
...
* treewide: make 'ifdef DEBUG_PORT' guards also take into account DEBUG_MUTE
* stm32wl: Add a guard against having debug prints turned on without PIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF defined
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
2025-07-29 08:51:38 +10:00
Ben Meadors and GitHub
cc5d00e211
Core portnums rebroadcast mode whitelist instead of blacklist ( #7487 )
2025-07-28 12:37:37 -05:00
Ben Meadors and GitHub
1a8ab2aadc
NodeDB count on MyNodeInfo for client progress reporting ( #7489 )
2025-07-28 12:23:59 -05:00
Ben Meadors and GitHub
3ecff48722
Set firmware edition (for events) from userprefs ( #7488 )
...
* Set firmware edition (for events) from userprefs
* Spaces in the right places
2025-07-28 07:31:33 -05:00
7c5e2c5393
Update protobufs ( #7473 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-07-26 16:21:49 -05:00
a506dc6b65
Fix MQTT config bugs ( #7446 )
...
* Fix mqtt config bugs
* Apply suggestion from @Copilot
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Add client notification
* Verbiage
* Update src/mqtt/MQTT.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update src/mqtt/MQTT.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update src/mqtt/MQTT.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Update src/mqtt/MQTT.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* Remove test that is no longer true
* This test no longer exists
* Fix client notification crap
* Suppress false positive
* Revert "Suppress false positive"
This reverts commit bead96eaee31f11ed631c016eb0424055e923a29.
* Try macro exclusion
* Derp
* Fix
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
Co-authored-by: Jason P <applewiz@mac.com >
2025-07-26 05:38:24 -05:00
4eb6c9fb8e
Add BR_902, Brazil 902MHz-907.5MHz ( #7399 )
...
As reported by @barbabarros , the Brazilian government has specific support for LoRA[1] across multiple frequencies[2][3].
We currently support Brazil through the ANZ/AU915 band. However, Brazil also has another frequency available for use:
902 - 907.5 MHz , 1W power limit, no duty cycle restrictions
[1] https://sistemas.anatel.gov.br/anexar-api/publico/anexos/download/a028ab5cc4e3f97442830bba0c8bd1dd
[2]
https://informacoes.anatel.gov.br/legislacao/resolucoes/2025/2001-resolucao-772
[3] https://informacoes.anatel.gov.br/legislacao/atos-de-certificacao-de-produtos/2017/1139-ato-14448#item10
Protobuf patch: https://github.com/meshtastic/protobufs/pull/737
Fixes https://github.com/meshtastic/firmware/issues/3741
Co-authored-by: Austin <vidplace7@gmail.com >
2025-07-23 14:55:17 +02:00
46e2ae8860
Add Nepal 865 MHz to 868 MHz ( #7380 )
...
Co-authored-by: Tom Fifield <tom@tomfifield.net >
Co-authored-by: Austin <vidplace7@gmail.com >
2025-07-23 14:54:43 +02:00
Jonathan Bennett and GitHub
82ddf4732a
Deprecate disable_triple_click config ( #7425 )
2025-07-23 05:57:17 -05:00
96f63f3945
Update protobufs ( #7422 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-07-22 13:49:53 -05:00
32418448de
Update protobufs ( #7410 )
...
Co-authored-by: caveman99 <25002+caveman99@users.noreply.github.com >
2025-07-21 20:32:55 +02:00
b3525c2569
T-Deck Pro support ( #6936 )
...
* initial draft
* fix touchscreen
* fix touchscreen
* optimize GPS
* battery management
* cleanup comments
* enable vibration motor
* refactored TCA8418Keyboard
* update HW_VENDOR id
* manual fixes after merge
* fix keyboard/BQ27220 detection
* add BQ27220
* modify charge voltage and current
* update XpowerLib
* design capacity
* try-fix charge behavior
* improve Vbus detection
* moved variant into esp32s3 folder
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com >
2025-07-21 19:33:24 +02:00
Ben Meadors and GitHub
8aef3c44f4
Text message rate limiting should return routing error instead ( #7365 )
...
* Text message rate limiting should return routing error instead
* Proper rooting
* Update PhoneAPI.cpp
* Update PhoneAPI.cpp
2025-07-20 20:12:10 -05:00
Thomas Göttgens and GitHub
b851b15a73
fix UDP builds on nRF ( #7394 )
...
* fix UDP builds on nRF
* fix rp2040 too
2025-07-20 23:13:50 +02:00
73347c2542
Update protobufs ( #7395 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-07-20 15:03:56 -05:00
a9c9b96eb6
UDP for RAK4631 Eth Gw and the t-eth-elite. Solves #7149 ( #7385 )
...
* UDP for RAK4631 Eth Gw and the t-eth-elite. Also enable IP output on Portduino. Solves #7149
* Copilot suggestion
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
* fix portduino build
* initialize local port
---------
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com >
Co-authored-by: Ben Meadors <benmmeadors@gmail.com >
2025-07-20 06:22:00 -05:00
Jonathan Bennett and GitHub
91049d0db3
Misc cppcheck fixes ( #7370 )
2025-07-20 06:19:45 -05:00
8f10de5684
[create-pull-request] automated change ( #7338 )
...
Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com >
2025-07-14 09:46:43 -05:00