* Null-check packet allocations in allocForSending and its callers
Sibling of 0ae44d701.
* Null-check allocDataProtobuf, allocAckNak and allocErrorResponse callers
Second tier of the same nullable contract.
* Keep telemetry sleep scheduling on allocation failure
Allocation failure now marks the telemetry invalid instead of returning
early, so power-saving SENSOR nodes still arm deep sleep.
* stm32wl: add hardware RTC support infrastructure
Wires the STM32WL chip's internal RTC (running off the LSE 32.768kHz
crystal) into meshtastic's existing time-of-day framework
(perhapsSetRTC()/readFromRTC()), following the same pattern already
used for I2C RTC chips (RV3028, PCF8563/85063, RX8130CE).
LSE is started and polled manually before ever calling into the
STM32RTC library, with our own bounded timeout - the library's own
internal LSE startup path has no bounded fallback and hangs forever
via Error_Handler() if the crystal never locks, so this is required
for a board with a missing/faulty crystal to boot normally rather
than hang.
Gated behind a new HAS_LSE variant flag (currently unset everywhere,
so this is inert until a variant opts in - see follow-up commit).
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* gps: qualify RTC.h includes to avoid case-insensitive filesystem collision with STM32RTC
The stm32duino STM32RTC library (added to lib_deps in a follow-up
commit) ships its own src/rtc.h. On case-insensitive filesystems
(the macOS default), an unqualified #include "RTC.h"/<RTC.h> from
any file outside src/gps/ resolves to the library's rtc.h instead of
src/gps/RTC.h, since PlatformIO's LDF puts lib_deps include paths
ahead of the project's own -Isrc/gps.
Qualify every include as gps/RTC.h so it can't collide with any
same-named header a future dependency might ship, regardless of
filesystem case sensitivity. Purely mechanical, no behavior change.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl(rak3172): enable hardware RTC support
Opts rak3172 into the HAS_LSE infrastructure added previously: sets
STM32WL_LSE_DRIVE to a conservative default and pulls in the
STM32RTC library. rak3172 has ~63KB flash headroom going in;
build-verified at 76.7% flash usage after this change (up from a
73.8% baseline), well within budget.
wio-e5 is not opted in here despite sharing the same STM32WLE5 chip
- it's already at 96.8% flash usage today (GPS + I2C sensor support
compiled in, unlike rak3172), leaving too little headroom to safely
add STM32RTC without first trimming something else.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl: add docstrings for LSE/RTC setup functions
Addresses CodeRabbit's docstring coverage check on PR #10961.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
* stm32wl: address CodeRabbit nitpicks on PR #10961
- Brace the single-statement HAS_LSE branch in perhapsSetRTC() to
match the sibling readFromRTC() branch's style.
- Quote the RTC.h include in PhoneAPI.cpp for consistency with every
other qualified include site.
Signed-off-by: Andrew Yong <me@ndoo.sg>
Assisted-by: Claude Sonnet 5 <noreply@anthropic.com>
---------
Signed-off-by: Andrew Yong <me@ndoo.sg>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
* Refactor memory management in Syslog and StoreForwardModule
* Implement destructor for Lock
* Refactor RotaryEncoder and PacketHistory to use smart pointers for better memory management
* CH341 should use unique_ptr for improved memory management
* Fix checks in PH
* Improve Syslog::vlogf to handle variable argument lists more safely
* Fix initOk method to use nullptr for null pointer check
`memcpy(... p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN)`
reads past the actual payload when the incoming packet's payload is
shorter than `DATA_PAYLOAD_LEN` (237 bytes). The code just above
already records the correct size:
this->packetHistory[...].payload_size = p.payload.size;
but then the memcpy ignores that and copies the full buffer capacity,
pulling uninitialized / adjacent memory bytes into the history entry.
Those extra bytes are later rebroadcast whenever the Store & Forward
module replays the packet.
Fix: memcpy using `p.payload.size` (the actual payload length) instead
of the constant buffer capacity.
Classification: bounded out-of-bounds READ into the protobuf scratch
buffer. Not directly exploitable for RCE (the destination buffer is
also DATA_PAYLOAD_LEN), but leaks adjacent memory into replayed
packets and is a latent correctness bug.
ROUTER_LATE now preserves node_info_broadcast_secs during factory
reset and auto-enables Store & Forward server mode, matching ROUTER
infrastructure behavior.
* simplify the observer pattern, since all the called functions are const getters.
* use arduino macro over std: for numerical values and refactor local variables in drawScrollbar()
* oh, so Cppcheck actually complained about const pointers not being const.
* slowly getting out of ifdef hell
* fix inkHUD warnings as well
* last 2 check warnings
* git checks should fail on low defects from now on
I thought git would be smart enough to understand all the whitespace changes but even with all the flags I know to make it ignore theses it still blows up if there are identical changes on both sides.
I have a solution but it require creating a new commit at the merge base for each conflicting PR and merging it into develop.
I don't think blowing up all PRs is worth for now, maybe if we can coordinate this for V3 let's say.
This reverts commit 0d11331d18.
remove newline from logging statements in code. The LOG_* functions will now magically add it at the end.
---------
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Thomas GöttgensandGitHub
nightjoker7andGitHub
Clive BlackledgeandGitHub
JorropoandGitHub
WesselandGitHub
GUVWAFandGitHub
Tom FifieldandGitHub
Jonathan BennettandThomas Göttgens