# Station G3 motherboard with a Raspberry Pi Zero 2W as the MCU daughterboard.
# Verify spidev / I2C device paths for your OS — they may differ.
Meta:
  name: Station G3
  support: community
  compatible:
    - raspberry-pi

Lora:
  Module: sx1262
  IRQ: 22                       # BCM pin — wiki spec
  Reset: 16                     # BCM pin — wiki spec
  Busy: 24                      # BCM pin — wiki spec
  # CS: 8                       # BCM 8 = SPI0 CE0 (default); uncomment only to override
  DIO2_AS_RF_SWITCH: true
  DIO3_TCXO_VOLTAGE: true
  spidev: spidev0.0
  # SX126X_MAX_POWER: 19        # matches Station G2 firmware cap; raise carefully per PA jumper mode