; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
[env:rak_wismeshtap]
custom_meshtastic_hw_model = 84
custom_meshtastic_hw_model_slug = WISMESH_TAP
custom_meshtastic_architecture = nrf52840
custom_meshtastic_actively_supported = true
custom_meshtastic_support_level = 1
custom_meshtastic_display_name = RAK WisMesh Tap
custom_meshtastic_images = rak-wismeshtap.svg
custom_meshtastic_tags = RAK

extends = nrf52840_base
board = wiscore_rak4631
build_flags = ${nrf52840_base.build_flags}
  -UOLEDDISPLAY_REDUCE_MEMORY ; TFTDisplay.cpp needs the lib's buffer_back for dirty-window diffing
  -Ivariants/nrf52840/rak_wismeshtap
  -DWISMESH_TAP
  -DRAK_4631
  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
  -DMESHTASTIC_EXCLUDE_WIFI=1
  -DMESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
  -DMESHTASTIC_EXCLUDE_STOREFORWARD=1
  -DMESHTASTIC_EXCLUDE_POWER_TELEMETRY=1
  -DMESHTASTIC_EXCLUDE_ATAK=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak_wismeshtap> +<mesh/eth/> +<mesh/api/> +<mqtt/>
lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=github-tags depName=RAK13800-W5100S packageName=RAKWireless/RAK13800-W5100S
  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
  rakwireless/RAKwireless NCP5623 RGB LED library@1.0.3
  # renovate: datasource=custom.pio depName=TFT_eSPI packageName=bodmer/library/TFT_eSPI
  bodmer/TFT_eSPI@2.5.43
  # renovate: datasource=custom.pio depName=RAK12034 packageName=beegee-tokyo/library/RAKwireless RAK12034
  beegee-tokyo/RAKwireless RAK12034@1.0.0
  # renovate: datasource=custom.pio depName=RAK14014-FT6336U packageName=beegee-tokyo/library/RAK14014-FT6336U
  beegee-tokyo/RAK14014-FT6336U@1.0.1
  # renovate: datasource=custom.pio depName=RAK12035_SoilMoisture packageName=beegee-tokyo/library/RAK12035_SoilMoisture
  beegee-tokyo/RAK12035_SoilMoisture@1.0.4
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = jlink