kevin/meshtastic_firmware
1
0
Fork 0
Code Issues Pull Requests Actions 5 Packages Projects Releases Wiki Activity
Files
016e68ec53fca8a9074fa8abf20210e379a0db6b
meshtastic_firmware/src/configuration.h
T
Clive BlackledgeGitHubCopilot
 016e68ec53 Traffic Management Module for packet forwarding logic (#9358) 
* Add ESP32 Power Management lessons learned document

Documents our experimentation with ESP-IDF DFS and why it doesn't
work well for Meshtastic (RTOS locks, BLE locks, USB issues).

Proposes simpler alternative: manual setCpuFrequencyMhz() control
with explicit triggers for when to go fast vs slow.

* Addition of traffic management module

* Fixing compile issues, but may still need to update protobufs.

* Fixing log2Floor in cuckoo hash function

* Adding support for traffic management in PhoneAPI.

* Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE.

* Adding station-g2 and portduino varients to be able to use this module.

* Spoofing from address for nodeinfo cache

* Changing name and behavior for zero_hop_telemetry / zero_hop_position

* Name change for exhausting telemetry packets and setting hop_limit to 1 so it will be 0 when sent.

* Updated hop logic, including exhaustRequested flag to bypass some checks later in the code.

* Reducing memory on nrf52 nodes further to 12 bytes per entry, 12KB total using 8 bit hashes with 0.4% collision. Probably ok. Adding portduino to the platforms that don't need to worry about memory as much.

* Fixing hopsAway for nodeinfo responses.

* traffic_management.nodeinfo_direct_response_min_hops -> traffic_management.nodeinfo_direct_response_max_hops

* Removing dry run mode

* Updates to UnifiedCacheEntry to use a common cache, created defaults for some values, reduced a couple bytes per entry by using a resolution-scale time selection based on configuration value.

* Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants.

* Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails.

* Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit.

* Creating consistent log messages

* Remove docs/ESP32_Power_Management.md from traffic_module

* Add unit tests for Traffic Management Module functionality

* Fixing compile issues, but may still need to update protobufs.

* Adding support for traffic management in PhoneAPI.

* Making router_preserve_hops work without checking if the previous hop was a router. Also works for CLIENT_BASE.

* Enhance traffic management logging and configuration. Updated log messages in NextHopRouter and Router to include more context. Adjusted traffic management configuration checks in AdminModule and improved cache handling in TrafficManagementModule. Ensured consistent enabling of traffic management across various variants.

* Implement destructor for TrafficManagementModule and improve cache allocation handling. The destructor ensures proper deallocation of cache memory based on its allocation source (PSRAM or heap). Additionally, updated cache allocation logic to log warnings only when PSRAM allocation fails.

* Update TrafficManagementModule with enhanced comments for clarity and improve cache handling logic. Update protobuf submodule to latest commit.

* Add mock classes and unit tests for Traffic Management Module functionality.

* Refactor setup and loop functions in test_main.cpp to include extern "C" linkage

* Update comment to include reduced  memory requirements

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Re-arranging comments for programmers with the attention span of less than 5 lines of code.

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update comments in TrafficManagementModule to reflect changes in timestamp epoch handling and memory optimization details.

* bug: Use node-wide config_ok_to_mqtt setting for cached NodeInfo replies.

* Better way to handle clearing the ok_to_mqtt bit

* Add bucketing to cuckoo hashing, allowing for 95% occupied rate before major eviction problems.

* Extend nodeinfo cache for psram devices.

* Refactor traffic management to make hop exhaustion packet-scoped. Nice catch.

* Implement better position precision sanitization in TrafficManagementModule.

* Added logic in TrafficManagementModule to invalidate stale traffic state. Also, added some tests to avoid future me from creating a regression here.

* Fixing tests for native

* Enhance TrafficManagementModule to improve NodeInfo response handling and position deduplication logic. Added tests to ensure local packets bypass transit filters and that NodeInfo requests correctly update the requester information in the cache. Updated deduplication checks to prevent dropping valid position packets under certain conditions.

---------

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2026-03-11 06:12:12 -05:00

546 lines
16 KiB
C
Raw Blame History

/*
TTGO T-BEAM Tracker for The Things Network
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
This code requires LMIC library by Matthijs Kooijman
https://github.com/matthijskooijman/arduino-lmic
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <Arduino.h>
#if __has_include("Melopero_RV3028.h")
#include "Melopero_RV3028.h"
#endif
#if __has_include("SensorRtcHelper.hpp")
#include "SensorRtcHelper.hpp"
#endif
/* Offer chance for variant-specific defines */
#include "variant.h"
// -----------------------------------------------------------------------------
// Display feature overrides
// -----------------------------------------------------------------------------
// Allow build environments to opt-in explicitly to the E-Ink UI stack while
// keeping headless targets slim by default. Existing variants that already
// define USE_EINK continue to work without additional flags.
#ifndef MESHTASTIC_USE_EINK_UI
#ifdef USE_EINK
#define MESHTASTIC_USE_EINK_UI 1
#else
#define MESHTASTIC_USE_EINK_UI 0
#endif
#endif
#if MESHTASTIC_USE_EINK_UI
#ifndef USE_EINK
#define USE_EINK
#endif
#else
#undef USE_EINK
#endif
// -----------------------------------------------------------------------------
// Version
// -----------------------------------------------------------------------------
// If app version is not specified we assume we are not being invoked by the build script
#ifndef APP_VERSION
#error APP_VERSION must be set by the build environment
#endif
// FIXME: This is still needed by the Bluetooth Stack and needs to be replaced by something better. Remnant of the old versioning
// system.
#ifndef HW_VERSION
#define HW_VERSION "1.0"
#endif
// -----------------------------------------------------------------------------
// Configuration
// -----------------------------------------------------------------------------
/// Convert a preprocessor name into a quoted string
#define xstr(s) ystr(s)
#define ystr(s) #s
/// Convert a preprocessor name into a quoted string and if that string is empty use "unset"
#define optstr(s) (xstr(s)[0] ? xstr(s) : "unset")
// Nop definition for these attributes that are specific to ESP32
#ifndef EXT_RAM_ATTR
#define EXT_RAM_ATTR
#endif
#ifndef IRAM_ATTR
#define IRAM_ATTR
#endif
#ifndef RTC_DATA_ATTR
#define RTC_DATA_ATTR
#endif
#ifndef EXT_RAM_BSS_ATTR
#define EXT_RAM_BSS_ATTR EXT_RAM_ATTR
#endif
// -----------------------------------------------------------------------------
// Regulatory overrides
// -----------------------------------------------------------------------------
// Override user saved region, for producing region-locked builds
// #define REGULATORY_LORA_REGIONCODE meshtastic_Config_LoRaConfig_RegionCode_SG_923
// Total system gain in dBm to subtract from Tx power to remain within regulatory and Tx PA limits
// The value consists of PA gain + antenna gain (if variant has a non-removable antenna)
// TX_GAIN_LORA should be set with definitions below for common modules, or in variant.h.
// Gain for common modules with transmit PAs
#ifdef EBYTE_E22_900M30S
// 10dB PA gain and 30dB rated output; based on measurements from
// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt
#define TX_GAIN_LORA 7
#define SX126X_MAX_POWER 22
#endif
#ifdef EBYTE_E22_900M33S
// 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf
#define TX_GAIN_LORA 25
#define SX126X_MAX_POWER 8
#endif
#ifdef NICERF_MINIF27
// Note that datasheet power level of 9 corresponds with SX1262 at 22dBm
// Maximum output power of 29dBm with VCC_PA = 5V
#define TX_GAIN_LORA 7
#define SX126X_MAX_POWER 22
#endif
#ifdef NICERF_F30_HF
// Maximum output power of 29.6dBm with VCC = 5V and SX1262 at 22dBm
#define TX_GAIN_LORA 8
#define SX126X_MAX_POWER 22
#endif
#ifdef NICERF_F30_LF
// Maximum output power of 32.0dBm with VCC = 5V and SX1262 at 22dBm
#define TX_GAIN_LORA 10
#define SX126X_MAX_POWER 22
#endif
#ifdef USE_GC1109_PA
// Power Amps are often non-linear, so we can use an array of values for the power curve
#define NUM_PA_POINTS 22
#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7
#endif
#ifdef USE_KCT8103L_PA
// Power Amps are often non-linear, so we can use an array of values for the power curve
#define NUM_PA_POINTS 22
#define TX_GAIN_LORA 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 13, 13, 13, 12, 12, 11, 10, 9, 8, 7
#endif
#ifdef RAK13302
#define NUM_PA_POINTS 22
#define TX_GAIN_LORA 7, 8, 8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8
#endif
// Default system gain to 0 if not defined
#ifndef NUM_PA_POINTS
#define NUM_PA_POINTS 1
#endif
#ifndef TX_GAIN_LORA
#define TX_GAIN_LORA 0
#endif
#ifndef HAS_LORA_FEM
#define HAS_LORA_FEM 0
#endif
// -----------------------------------------------------------------------------
// Feature toggles
// -----------------------------------------------------------------------------
// Disable use of the NTP library and related features
// #define DISABLE_NTP
// Disable the welcome screen and allow
// #define DISABLE_WELCOME_UNSET
// -----------------------------------------------------------------------------
// OLED & Input
// -----------------------------------------------------------------------------
#define SSD1306_ADDRESS_L 0x3C // Addr = 0
#define SSD1306_ADDRESS_H 0x3D // Addr = 1
#if defined(SEEED_WIO_TRACKER_L1) && !defined(SEEED_WIO_TRACKER_L1_EINK)
#define SSD1306_ADDRESS SSD1306_ADDRESS_H
#define USE_SH1106
#endif
#define ST7567_ADDRESS 0x3F
// The SH1106 controller is almost, but not quite, the same as SSD1306
// Define this if you know you have that controller or your "SSD1306" misbehaves.
// #define USE_SH1106
// Define if screen should be mirrored left to right
// #define SCREEN_MIRROR
// I2C Keyboards (M5Stack, RAK14004, T-Deck, T-Deck Pro, T-Lora Pager, CardKB, BBQ10, MPR121, TCA8418)
#define CARDKB_ADDR 0x5F
#define TDECK_KB_ADDR 0x55
#define BBQ10_KB_ADDR 0x1F
#define MPR121_KB_ADDR 0x5A
#define TCA8418_KB_ADDR 0x34
// -----------------------------------------------------------------------------
// SENSOR
// -----------------------------------------------------------------------------
#define BME_ADDR 0x76
#define BME_ADDR_ALTERNATE 0x77
#define MCP9808_ADDR 0x18
#define INA_ADDR 0x40
#define INA_ADDR_ALTERNATE 0x41
#define INA_ADDR_WAVESHARE_UPS 0x43
#define INA3221_ADDR 0x42
#define MAX1704X_ADDR 0x36
#define QMC6310U_ADDR 0x1C
#define QMI8658_ADDR 0x6B
#define QMC5883L_ADDR 0x0D
#define HMC5883L_ADDR 0x1E
#define SHTC3_ADDR 0x70
#define LPS22HB_ADDR 0x5C
#define LPS22HB_ADDR_ALT 0x5D
#define SFA30_ADDR 0x5D
#define SHT31_4x_ADDR 0x44
#define SHT31_4x_ADDR_ALT 0x45
#define PMSA003I_ADDR 0x12
#define QMA6100P_ADDR 0x12
#define AHT10_ADDR 0x38
#define RCWL9620_ADDR 0x57
#define VEML7700_ADDR 0x10
#define TSL25911_ADDR 0x29
#define OPT3001_ADDR 0x45
#define OPT3001_ADDR_ALT 0x44
#define MLX90632_ADDR 0x3A
#define DFROBOT_LARK_ADDR 0x42
#define DFROBOT_RAIN_ADDR 0x1d
#define NAU7802_ADDR 0x2A
#define MAX30102_ADDR 0x57
#define SCD4X_ADDR 0x62
#define CW2015_ADDR 0x62
#define MLX90614_ADDR_DEF 0x5A
#define CGRADSENS_ADDR 0x66
#define LTR390UV_ADDR 0x53
#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34 // same adress as TCA8418_KB
#define PCT2075_ADDR 0x37
#define BQ27220_ADDR 0x55 // same address as TDECK_KB
#define BQ25896_ADDR 0x6B
#define LTR553ALS_ADDR 0x23
#define SEN5X_ADDR 0x69
#define SCD30_ADDR 0x61
// -----------------------------------------------------------------------------
// ACCELEROMETER
// -----------------------------------------------------------------------------
#define MPU6050_ADDR 0x68
#define STK8BXX_ADDR 0x18
#define LIS3DH_ADDR 0x18
#define LIS3DH_ADDR_ALT 0x19
#define BMA423_ADDR 0x19
#define LSM6DS3_ADDR 0x6A
#define BMX160_ADDR 0x69
#define ICM20948_ADDR 0x69
#define ICM20948_ADDR_ALT 0x68
#define BHI260AP_ADDR 0x28
#define BMM150_ADDR 0x13
#define DA217_ADDR 0x26
#define BMI270_ADDR 0x68
#define BMI270_ADDR_ALT 0x69
// -----------------------------------------------------------------------------
// LED
// -----------------------------------------------------------------------------
#define NCP5623_ADDR 0x38
#define LP5562_ADDR 0x30
// -----------------------------------------------------------------------------
// Security
// -----------------------------------------------------------------------------
// -----------------------------------------------------------------------------
// IO Expander
// -----------------------------------------------------------------------------
#define TCA9535_ADDR 0x20
#define TCA9555_ADDR 0x26
// -----------------------------------------------------------------------------
// Touchscreen
// -----------------------------------------------------------------------------
#define FT6336U_ADDR 0x48
#define CST328_ADDR 0x1A // same address as CST226SE
#define CHSC6X_ADDR 0x2E
#define CST226SE_ADDR_ALT 0x5A
// -----------------------------------------------------------------------------
// RAK12035VB Soil Monitor (using RAK12023 up to 3 RAK12035 monitors can be connected)
// - the default i2c address for this sensor is 0x20, and users are instructed to
// set 0x21 and 0x22 for the second and third sensor if present.
// -----------------------------------------------------------------------------
#define RAK120351_ADDR 0x20
#define RAK120352_ADDR 0x21
#define RAK120353_ADDR 0x22
// -----------------------------------------------------------------------------
// BIAS-T Generator
// -----------------------------------------------------------------------------
#define TPS65233_ADDR 0x60
// convert 24-bit color to 16-bit (56K)
#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
#if defined(VEXT_ENABLE) && !defined(VEXT_ON_VALUE)
// Older variant.h files might not be defining this value, so stay with the old default
#define VEXT_ON_VALUE LOW
#endif
// -----------------------------------------------------------------------------
// Rotary encoder
// -----------------------------------------------------------------------------
#ifndef ROTARY_DELAY
#define ROTARY_DELAY 5
#endif
// -----------------------------------------------------------------------------
// GPS
// -----------------------------------------------------------------------------
#ifndef GPS_BAUDRATE
#define GPS_BAUDRATE 9600
#define GPS_BAUDRATE_FIXED 0
#else
#define GPS_BAUDRATE_FIXED 1
#endif
#ifndef GPS_THREAD_INTERVAL
#define GPS_THREAD_INTERVAL 200
#endif
/* Step #2: follow with defines common to the architecture;
also enable HAS_ option not specifically disabled by variant.h */
#include "architecture.h"
#ifndef DEFAULT_REBOOT_SECONDS
#define DEFAULT_REBOOT_SECONDS 7
#endif
#ifndef DEFAULT_SHUTDOWN_SECONDS
#define DEFAULT_SHUTDOWN_SECONDS 2
#endif
#ifndef MINIMUM_SAFE_FREE_HEAP
#define MINIMUM_SAFE_FREE_HEAP 1500
#endif
#ifndef WIRE_INTERFACES_COUNT
// Officially an NRF52 macro
// Repurposed cross-platform to identify devices using Wire1
#if defined(I2C_SDA1) || defined(PIN_WIRE1_SDA)
#define WIRE_INTERFACES_COUNT 2
#elif HAS_WIRE
#define WIRE_INTERFACES_COUNT 1
#endif
#endif
/* Step #3: mop up with disabled values for HAS_ options not handled by the above two */
#ifndef HAS_WIFI
#define HAS_WIFI 0
#endif
#ifndef HAS_ETHERNET
#define HAS_ETHERNET 0
#endif
#ifndef HAS_SCREEN
#define HAS_SCREEN 0
#endif
#ifndef HAS_TFT
#define HAS_TFT 0
#endif
#ifndef HAS_WIRE
#define HAS_WIRE 0
#endif
#ifndef HAS_GPS
#define HAS_GPS 0
#endif
#ifndef HAS_BUTTON
#define HAS_BUTTON 0
#endif
#ifndef HAS_TRACKBALL
#define HAS_TRACKBALL 0
#endif
#ifndef HAS_TOUCHSCREEN
#define HAS_TOUCHSCREEN 0
#endif
#ifndef HAS_TELEMETRY
#define HAS_TELEMETRY 0
#endif
#ifndef HAS_SENSOR
#define HAS_SENSOR 0
#endif
#ifndef HAS_RADIO
#define HAS_RADIO 0
#endif
#ifndef HAS_CPU_SHUTDOWN
#define HAS_CPU_SHUTDOWN 0
#endif
#ifndef HAS_BLUETOOTH
#define HAS_BLUETOOTH 0
#endif
#ifndef USE_TFTDISPLAY
#define USE_TFTDISPLAY 0
#endif
#ifndef HW_VENDOR
#error HW_VENDOR must be defined
#endif
#ifndef TB_DOWN
#define TB_DOWN 255
#endif
#ifndef TB_UP
#define TB_UP 255
#endif
#ifndef TB_LEFT
#define TB_LEFT 255
#endif
#ifndef TB_RIGHT
#define TB_RIGHT 255
#endif
#ifndef TB_PRESS
#define TB_PRESS 255
#endif
// Support multiple RGB LED configuration
#if defined(HAS_NCP5623) || defined(HAS_LP5562) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
#define HAS_RGB_LED
#endif
#ifndef LED_STATE_ON
#define LED_STATE_ON 1
#endif
#ifndef LED_STATE_OFF
#define LED_STATE_OFF (LED_STATE_ON ^ 1)
#endif
#ifndef ledOff
#define ledOff(pin) pinMode(pin, INPUT)
#endif
// default mapping of pins
#if defined(PIN_BUTTON2) && !defined(CANCEL_BUTTON_PIN)
#define ALT_BUTTON_PIN PIN_BUTTON2
#endif
#if defined ALT_BUTTON_PIN
#ifndef ALT_BUTTON_ACTIVE_LOW
#define ALT_BUTTON_ACTIVE_LOW true
#endif
#ifndef ALT_BUTTON_ACTIVE_PULLUP
#define ALT_BUTTON_ACTIVE_PULLUP true
#endif
#endif
// -----------------------------------------------------------------------------
// Global switches to turn off features for a minimized build
// -----------------------------------------------------------------------------
// #define MESHTASTIC_MINIMIZE_BUILD 1
#ifdef MESHTASTIC_MINIMIZE_BUILD
#define MESHTASTIC_EXCLUDE_MODULES 1
#define MESHTASTIC_EXCLUDE_WIFI 1
#define MESHTASTIC_EXCLUDE_BLUETOOTH 1
#define MESHTASTIC_EXCLUDE_GPS 1
#define MESHTASTIC_EXCLUDE_SCREEN 1
#define MESHTASTIC_EXCLUDE_MQTT 1
#define MESHTASTIC_EXCLUDE_POWERMON 1
#define MESHTASTIC_EXCLUDE_I2C 1
#define MESHTASTIC_EXCLUDE_PKI 1
#define MESHTASTIC_EXCLUDE_POWER_FSM 1
#define MESHTASTIC_EXCLUDE_TZ 1
#endif
// Turn off all optional modules
#ifdef MESHTASTIC_EXCLUDE_MODULES
#define MESHTASTIC_EXCLUDE_AUDIO 1
#define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1
#define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1
#define MESHTASTIC_EXCLUDE_AIR_QUALITY_SENSOR 1
#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1
#define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1
#define MESHTASTIC_EXCLUDE_PAXCOUNTER 1
#define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1
#define MESHTASTIC_EXCLUDE_RANGETEST 1
#define MESHTASTIC_EXCLUDE_REMOTEHARDWARE 1
#define MESHTASTIC_EXCLUDE_STOREFORWARD 1
#define MESHTASTIC_EXCLUDE_TEXTMESSAGE 1
#define MESHTASTIC_EXCLUDE_TRAFFIC_MANAGEMENT 1
#define MESHTASTIC_EXCLUDE_ATAK 1
#define MESHTASTIC_EXCLUDE_CANNEDMESSAGES 1
#define MESHTASTIC_EXCLUDE_NEIGHBORINFO 1
#define MESHTASTIC_EXCLUDE_TRACEROUTE 1
#define MESHTASTIC_EXCLUDE_WAYPOINT 1
#define MESHTASTIC_EXCLUDE_INPUTBROKER 1
#define MESHTASTIC_EXCLUDE_SERIAL 1
#define MESHTASTIC_EXCLUDE_POWERSTRESS 1
#define MESHTASTIC_EXCLUDE_ADMIN 1
#endif
// // Turn off wifi even if HW supports wifi (webserver relies on wifi and is also disabled)
#ifdef MESHTASTIC_EXCLUDE_WIFI
#define MESHTASTIC_EXCLUDE_WEBSERVER 1
#undef HAS_WIFI
#define HAS_WIFI 0
#endif
// Allow code that needs internet to just check HAS_NETWORKING rather than HAS_WIFI || HAS_ETHERNET
#define HAS_NETWORKING (HAS_WIFI || HAS_ETHERNET)
// // Turn off Bluetooth
#ifdef MESHTASTIC_EXCLUDE_BLUETOOTH
#undef HAS_BLUETOOTH
#define HAS_BLUETOOTH 0
#endif
// // Turn off GPS
#ifdef MESHTASTIC_EXCLUDE_GPS
#undef HAS_GPS
#define HAS_GPS 0
#undef MESHTASTIC_EXCLUDE_RANGETEST
#define MESHTASTIC_EXCLUDE_RANGETEST 1
#endif
// Turn off Screen
#ifdef MESHTASTIC_EXCLUDE_SCREEN
#undef HAS_SCREEN
#define HAS_SCREEN 0
#endif
#include "DebugConfiguration.h"
#include "RF95Configuration.h"
Reference in New Issue View Git Blame Copy Permalink