89 lines
2.0 KiB
C
89 lines
2.0 KiB
C
#ifndef _VARIANT_MOONSHINE_ESP_C3_
|
|
#define _VARIANT_MOONSHINE_ESP_C3_
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Headers
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif // __cplusplus
|
|
|
|
// Button
|
|
#define BUTTON_PIN 9 // BOOT button
|
|
|
|
// LED
|
|
#define LED_POWER 0 // LED
|
|
#define LED_STATE_ON 1 // State when LED is lit
|
|
|
|
// Battery ADC - GPIO1 = ADC1 channel 1 on ESP32-C3
|
|
#define BATTERY_PIN 1
|
|
#define ADC_CHANNEL ADC_CHANNEL_1
|
|
#define ADC_MULTIPLIER 2.0f
|
|
|
|
// No screen / no GPS
|
|
#define HAS_SCREEN 0
|
|
#define HAS_GPS 0
|
|
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
|
|
|
|
#define E220_400M30S
|
|
//#define E220_400M33S
|
|
//#define E22_400M33S
|
|
|
|
#ifdef E220_400M30S
|
|
// LoRa - E220-400M30S (LLCC68, 433MHz, 30dBm/1W module with PA)
|
|
#define USE_LLCC68
|
|
#define TX_GAIN_LORA 8
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef E220_400M33S
|
|
// LoRa - E220-400M33S (LLCC68, 433MHz, 33dBm/2W module with PA)
|
|
#define USE_LLCC68
|
|
#define TX_GAIN_LORA 11
|
|
#define SX126X_MAX_POWER 22
|
|
#endif
|
|
|
|
#ifdef E22_400M33S
|
|
// LoRa - E22-400M33S (SX1268, 433MHz, 33dBm/2W module with PA)
|
|
#define USE_SX1268
|
|
#define NUM_PA_POINTS 1
|
|
#define TX_GAIN_LORA 25
|
|
#define SX126X_MAX_POWER 8
|
|
#endif
|
|
|
|
|
|
|
|
#define LORA_SCK 10
|
|
#define LORA_MISO 6
|
|
#define LORA_MOSI 7
|
|
#define LORA_CS 8
|
|
#define LORA_DIO0 RADIOLIB_NC
|
|
#define LORA_RESET 5
|
|
#define LORA_DIO1 3
|
|
#define LORA_DIO2 RADIOLIB_NC
|
|
#define LORA_BUSY 4
|
|
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY LORA_BUSY
|
|
#define SX126X_RESET LORA_RESET
|
|
#define SX126X_RXEN 2
|
|
#define SX126X_TXEN RADIOLIB_NC // DIO2 drives TXEN via SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
#define TCXO_OPTIONAL // firmware can try both TCXO and XTAL
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------------
|
|
* Arduino objects - C++ only
|
|
*----------------------------------------------------------------------------*/
|
|
|
|
#endif
|