Ben Meadors
2a20ee5954
The rak_wismesh_tap_v2-tft link failed on CI with "sh: Argument list too long": the device-ui bump in #11214 grew the MUI object list enough that the linker command line crossed the kernel exec arg limit (this env's long name lengthens every object path, so it tipped first). extra_scripts/ld_response_file.py already solves this for esp32p4; promote it to esp32_common so every ESP32 target links through a response file, and drop the now-inherited entry from esp32p4.ini. Verified by building rak_wismesh_tap_v2-tft at the failing commit plus this fix: links clean (macOS's exec arg limit is smaller than the Linux one that tripped CI, so an unwrapped link could not have passed).
112 lines
3.7 KiB
INI
112 lines
3.7 KiB
INI
[esp32p4_base]
|
|
extends = esp32_common
|
|
custom_esp32_kind = esp32p4
|
|
board_build.mcu = esp32p4
|
|
|
|
build_unflags=
|
|
-DHAS_UDP_MULTICAST=1
|
|
|
|
build_flags =
|
|
${esp32_common.build_flags}
|
|
-DMESHTASTIC_EXCLUDE_WIFI=1 ; TODO
|
|
-DMESHTASTIC_EXCLUDE_MQTT=1
|
|
-DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
|
|
|
|
build_src_filter =
|
|
${esp32_common.build_src_filter} -<libpax/> +<platform/esp32> -<mesh/raspihttp> -<serialization/>
|
|
|
|
; ld_response_file.py is inherited from esp32_common (promoted there when
|
|
; rak_wismesh_tap_v2-tft outgrew the exec arg limit; it originally shipped here).
|
|
extra_scripts =
|
|
${esp32_common.extra_scripts}
|
|
|
|
; Override esp32_common component pruning: keep esp_hosted + esp_wifi_remote for P4 hosted BT
|
|
custom_component_remove =
|
|
espressif/esp_modem
|
|
espressif/esp-dsp
|
|
espressif/esp32-camera
|
|
espressif/libsodium
|
|
espressif/esp-modbus
|
|
espressif/qrcode
|
|
espressif/esp_insights
|
|
espressif/esp_diag_data_store
|
|
espressif/esp_diagnostics
|
|
espressif/esp_rainmaker
|
|
espressif/rmaker_common
|
|
espressif/network_provisioning
|
|
chmorgan/esp-libhelix-mp3
|
|
espressif/esp-tflite-micro
|
|
espressif/esp-sr
|
|
espressif/esp_matter
|
|
espressif/esp-zboss-lib
|
|
espressif/esp-zigbee-lib
|
|
espressif/mqtt
|
|
|
|
custom_sdkconfig =
|
|
${esp32_common.custom_sdkconfig}
|
|
CONFIG_ARDUINO_SELECTIVE_SD_MMC=y
|
|
CONFIG_BT_CONTROLLER_DISABLED=y
|
|
CONFIG_ESP_WIFI_REMOTE_ENABLED=y
|
|
# esp_hosted core
|
|
CONFIG_ESP_HOSTED_ENABLED=y
|
|
# Board: custom (not Espressif EV board)
|
|
CONFIG_ESP_HOSTED_P4_DEV_BOARD_NONE=y
|
|
# Delay after C6 reset to allow boot (e.g. old v2.3.0 may be slow)
|
|
CONFIG_ESP_HOSTED_SDIO_RESET_DELAY_MS=1500
|
|
CONFIG_ESP_HOSTED_SDIO_OPTIMIZATION_RX_STREAMING_MODE=y
|
|
CONFIG_ESP_HOSTED_SDIO_HOST_INTERFACE=y
|
|
CONFIG_ESP_HOSTED_IDF_SLAVE_TARGET="esp32c6"
|
|
CONFIG_ESP_HOSTED_CP_TARGET_ESP32C6=y
|
|
CONFIG_ESP_HOSTED_CP_TARGET_ESP32H2=n
|
|
CONFIG_ESP_HOSTED_PRIV_SDIO_OPTION=y
|
|
CONFIG_ESP_HOSTED_SPI_HOST_INTERFACE=n
|
|
CONFIG_ESP_HOSTED_TRANSPORT_SDIO=y
|
|
CONFIG_ESP_HOSTED_ENABLE_NIMBLE=y
|
|
CONFIG_ESP_HOSTED_ENABLE_BT_NIMBLE=y
|
|
CONFIG_ESP_HOSTED_NIMBLE_HCI_VHCI=y
|
|
CONFIG_ESP_HOSTED_ENABLE_PEER_DATA_TRANSFER=y
|
|
CONFIG_ESP_HOSTED_MAX_CUSTOM_MSG_HANDLERS=3
|
|
# OTA method: LittleFS
|
|
CONFIG_OTA_METHOD_LITTLEFS=y
|
|
|
|
# Skip version check - we force OTA regardless
|
|
# CONFIG_OTA_VERSION_CHECK_HOST_SLAVE is not set
|
|
# CONFIG_OTA_VERSION_CHECK_SLAVEFW_SLAVE is not set
|
|
|
|
# RX streaming mode
|
|
CONFIG_ESP_HOSTED_SLAVE_RESET_ON_EVERY_HOST_BOOTUP=y
|
|
;CONFIG_ESP_HOSTED_SLAVE_RESET_ONLY_IF_NECESSARY=y
|
|
# SOC_LCD (MUI / lovyanGFX)
|
|
CONFIG_SOC_LCD_I80_SUPPORTED=y
|
|
CONFIG_SOC_LCD_RGB_SUPPORTED=y
|
|
CONFIG_SOC_MIPI_DSI_SUPPORTED=y
|
|
# stack dump
|
|
CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y ; remove for production version
|
|
;CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y; for production version
|
|
;CONFIG_ESP_SYSTEM_PANIC_GDBSTUB=y ; for target debugging
|
|
# Logger: verbose for experiment
|
|
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
|
|
CONFIG_LOG_MAXIMUM_LEVEL_DEBUG=y
|
|
|
|
|
|
lib_ignore =
|
|
${esp32_common.lib_ignore}
|
|
libpax
|
|
esp8266-oled-ssd1306
|
|
bsec2
|
|
esp32_idf5_https_server
|
|
esp_driver_cam
|
|
esp_http_server
|
|
|
|
; Override lib_deps to exclude environmental_extras
|
|
lib_deps =
|
|
${arduino_base.lib_deps}
|
|
${networking_base.lib_deps}
|
|
${networking_extra.lib_deps}
|
|
${environmental_base.lib_deps}
|
|
${radiolib_base.lib_deps}
|
|
# renovate: datasource=git-refs depName=meshtastic/Crypto packageName=https://github.com/meshtastic/Crypto gitBranch=main
|
|
https://github.com/meshtastic/Crypto/archive/591ff9a690e8168ccb7a36abde8d7783e448d395.zip
|
|
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
|
|
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
|