meshtastic_firmware/.github/prompts/mcp-diagnose.prompt.md

mode, description

mode	description
agent	Device health report via the meshtastic MCP tools (Copilot equivalent of the Claude Code /diagnose slash command)

/mcp-diagnose - device health report

Equivalent of .claude/commands/diagnose.md. Use when the operator asks to "check the devices", "what's the mesh looking like", "is nrf52 alive", etc.

This prompt assumes the meshtastic MCP server is registered with your VS Code Copilot agent. If it isn't, fall back to running ./mcp-server/run-tests.sh tests/unit plus a short device_info script via the terminal.

What to do

1. Enumerate hardware via the list_devices MCP tool (with include_unknown=True). For each entry where likely_meshtastic=True, capture port, vid, pid, description.

2. Apply the operator's filter (if any):

   • No filter → every likely-meshtastic device.
   • nrf52 → vid == 0x239a
   • esp32s3 → vid == 0x303a or vid == 0x10c4
   • A /dev/cu.* path → only that port.
   • Anything else → substring match on port.

3. For each selected device, in sequence (don't parallelize - SerialInterface holds an exclusive port lock):

   • device_info(port=<p>) → my_node_num, long_name, short_name, firmware_version, hw_model, region, num_nodes, primary_channel
   • list_nodes(port=<p>) → peer count, which peers have publicKey, SNR/RSSI distribution
   • get_config(section="lora", port=<p>) → region, preset, channel_num, tx_power, hop_limit
   • If anything looks off (can't connect, num_nodes wrong, missing firmware_version), open a short firmware-log window: serial_open(port=<p>, env=<inferred>), wait 3 seconds, serial_read(session_id, max_lines=100), serial_close(session_id). Infer env from VID (0x239a → rak4631, 0x303a/0x10c4 → heltec-v3) unless an MESHTASTIC_MCP_ENV_<ROLE> env var overrides it.

4. Hub health (call once, not per-device): uhubctl_list() - enumerates every USB hub the host sees. Cross-reference each Meshtastic device's VID to find which hub + port it's on. Flag in the report if:

   • No hub advertises ppps=true → tests/recovery/ can't run; hard-recovery via uhubctl_cycle isn't available.
   • A Meshtastic device is on a non-PPPS hub → note it; moving to a PPPS hub unlocks auto-recovery.
   • uhubctl_list raises ConfigError: uhubctl not found → report as "uhubctl not installed"; don't treat as a device fault.

5. Render per-device report as a compact block:

   [nrf52 @ /dev/cu.usbmodem1101]      fw=2.7.23.bce2825, hw=RAK4631
     owner       : Meshtastic 40eb / 40eb
     region/band : US, channel 88, LONG_FAST
     tx_power    : 30 dBm, hop_limit=3
     peers       : 1 (esp32s3 0x433c2428, pubkey ✓, SNR 6.0 / RSSI -24 dBm)
     primary ch  : McpTest
     hub         : 1-1.3 port 2 (PPPS, uhubctl-controllable)
     firmware    : no panics in last 3s
   

   Flag abnormalities inline with ⚠︎ <short reason> - missing pubkey on a known peer, region UNSET, mismatched channel name, device on non-PPPS hub, etc.

6. Cross-device correlation (when >1 device selected):

   • Do both see each other in nodesByNum?
   • Do region, channel_num, modem_preset match across devices?
   • Do the primary channel names match? (Different name → different PSK → no decode.)

7. Suggest next steps only for recognizable failure modes, never speculatively:

   • Stale PKI one-way → "/mcp-test tests/mesh/test_direct_with_ack.py - the test's retry+nodeinfo-ping heals this."
   • Region mismatch → "re-bake one side via ./mcp-server/run-tests.sh --force-bake."
   • Device unreachable, DFU reachable → touch_1200bps(port=...) + pio_flash. If not even DFU responds and the device is on a PPPS hub, escalate to uhubctl_cycle(role=..., confirm=True).
   • CP2102-wedged-driver on macOS → see run-tests.sh notes.

Hard constraints

• Read-only. No set_config, no reboot, no factory_reset, no flash. If the operator wants mutation, they'll escalate explicitly.
• Open/query/close per device. Never hold multiple SerialInterfaces to the same port. The port lock is exclusive.
• Don't infer env beyond the VID map - if the operator has an unusual board, ask them which env to use rather than guessing.