5e2ca8aed4
* LR2021 radio on NRF_Promicro Co-authored-by: Copilot <copilot@github.com> * Refactor LR2021 interface includes and conditional compilation for improved clarity Co-authored-by: Copilot <copilot@github.com> * Refactor LR20x0 interface: remove unused includes and update comments for clarity * Fix LR2021 max power definitions and add radio type detection tests * remove potato radio type detection tests * Include placeholder for DCDC - currently requires godmode * Added godmode features - not enabled by default --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
54 lines
2.1 KiB
C
54 lines
2.1 KiB
C
#pragma once
|
|
#include "RadioLib.h"
|
|
|
|
// Keep LR20x0 naming while RadioLib exposes LR2021 symbols.
|
|
#ifndef LR20x0
|
|
#define LR20x0 LR2021
|
|
#endif
|
|
|
|
// This is rewritten to match the requirements of the E80-900M2213S
|
|
// The E80 does not conform to the reference Semtech switches(!) and therefore needs a custom matrix.
|
|
// See footnote #3 in "https://www.cdebyte.com/products/E80-900M2213S/2#Pin"
|
|
// RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
|
|
// DIO5 -> RFSW0_V1
|
|
// DIO6 -> RFSW1_V2
|
|
// DIO7 -> not connected on E80 module - note that GNSS and Wifi scanning are not possible.
|
|
|
|
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
|
|
RADIOLIB_NC};
|
|
|
|
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
|
// clang-format off
|
|
// mode DIO5 DIO6 DIO7
|
|
{LR11x0::MODE_STBY, {LOW, LOW, LOW}},
|
|
{LR11x0::MODE_RX, {LOW, HIGH, LOW}},
|
|
{LR11x0::MODE_TX, {HIGH, HIGH, LOW}},
|
|
{LR11x0::MODE_TX_HP, {HIGH, LOW, LOW}},
|
|
{LR11x0::MODE_TX_HF, {LOW, LOW, LOW}},
|
|
{LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
|
|
{LR11x0::MODE_WIFI, {LOW, LOW, LOW}},
|
|
END_OF_MODE_TABLE,
|
|
// clang-format on
|
|
};
|
|
|
|
// LR2021 RF switch matrix following the standard Semtech / Seeed T1000-E reference topology.
|
|
// DIO5 -> antenna path select (HIGH = sub-GHz LF)
|
|
// DIO6 -> TX enable / HP PA select
|
|
// DIO7 -> not connected (no GNSS on LR2021)
|
|
// DIO8 -> RF front-end power enable
|
|
|
|
static const uint32_t lr20x0_rfswitch_dio_pins[] = {RADIOLIB_LR2021_DIO5, RADIOLIB_LR2021_DIO6, RADIOLIB_LR2021_DIO7,
|
|
RADIOLIB_LR2021_DIO8, RADIOLIB_NC};
|
|
|
|
static const Module::RfSwitchMode_t lr20x0_rfswitch_table[] = {
|
|
// clang-format off
|
|
// mode DIO5 DIO6 DIO7 DIO8
|
|
{LR20x0::MODE_STBY, {LOW, LOW, LOW, LOW}},
|
|
{LR20x0::MODE_RX, {HIGH, LOW, LOW, HIGH}},
|
|
{LR20x0::MODE_TX, {HIGH, HIGH, LOW, HIGH}},
|
|
{LR20x0::MODE_RX_HF, {LOW, LOW, LOW, LOW}},
|
|
{LR20x0::MODE_TX_HF, {LOW, LOW, LOW, LOW}},
|
|
END_OF_MODE_TABLE,
|
|
// clang-format on
|
|
};
|