Jonathan BennettandGitHub
2361776992
* Rename LED_PIN to LED_POWER, move handling out of main to dedicated module * Misc * Remove errant endif
42 lines
1.2 KiB
C
42 lines
1.2 KiB
C
#ifndef _VARIANT_MILESIGHT_GS301_
|
|
#define _VARIANT_MILESIGHT_GS301_
|
|
|
|
#define USE_STM32WLx
|
|
|
|
// I/O
|
|
#define LED_STATE_ON 1
|
|
#define PIN_LED1 PA0 // Green LED
|
|
#define LED_POWER PIN_LED1
|
|
#define PIN_LED2 PA0 // Red LED
|
|
#define USER_LED PIN_LED2
|
|
#define BUTTON_PIN PC13
|
|
#define BUTTON_ACTIVE_LOW true
|
|
#define BUTTON_ACTIVE_PULLUP false
|
|
#define PIN_BUZZER PA6
|
|
|
|
// EC Sense DGM10 Double Gas Module
|
|
// Analog ADuCM355 (unsupported); SHTC3 is connected to ADuCM355 and not directly accessible
|
|
#define PIN_WIRE_SDA PB7
|
|
#define PIN_WIRE_SCL PB8
|
|
// Commented out to keep sensor powered down due to lack of support
|
|
/*
|
|
#define VEXT_ENABLE PB12 // TI TPS61291DRV VSEL - set LOW before ENable for Vout = 3.3V
|
|
#define VEXT_ON_VALUE LOW
|
|
#define SENSOR_POWER_CTRL_PIN PB2 // TI TPS61291DRV EN pin
|
|
#define SENSOR_POWER_ON HIGH
|
|
#define HAS_SENSOR 1
|
|
*/
|
|
|
|
#define ENABLE_HWSERIAL1
|
|
#define PIN_SERIAL1_RX NC
|
|
#define PIN_SERIAL1_TX PB6
|
|
|
|
// LoRa
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 3.0
|
|
|
|
// Required to avoid Serial1 conflicts due to board definition here:
|
|
// https://github.com/stm32duino/Arduino_Core_STM32/blob/main/variants/STM32WLxx/WL54CCU_WL55CCU_WLE4C(8-B-C)U_WLE5C(8-B-C)U/variant_RAK3172_MODULE.h
|
|
#define RAK3172
|
|
|
|
#endif
|