166 lines
4.5 KiB
C
166 lines
4.5 KiB
C
/*
|
|
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
|
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
|
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
|
|
|
This library is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU Lesser General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2.1 of the License, or (at your option) any later version.
|
|
This library is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU Lesser General Public License for more details.
|
|
You should have received a copy of the GNU Lesser General Public
|
|
License along with this library; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#ifndef _VARIANT_HELTEC_MESH_NODE_T1_
|
|
#define _VARIANT_HELTEC_MESH_NODE_T1_
|
|
|
|
#define VARIANT_MCK (64000000ul)
|
|
#define USE_LFXO // Board uses 32khz crystal for LF
|
|
|
|
#include "WVariant.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif // __cplusplus
|
|
|
|
#define HELTEC_MESH_NODE_T1
|
|
|
|
// Display (ST7735, 80x160 TFT via SPI1)
|
|
#define HAS_SPI_TFT 1
|
|
#define ST7735_CS (0 + 12)
|
|
#define ST7735_RS (0 + 22) // DC
|
|
#define ST7735_SDA (0 + 24)
|
|
#define ST7735_SCK (32 + 0)
|
|
#define ST7735_RESET (0 + 20)
|
|
#define ST7735_MISO -1
|
|
#define ST7735_BUSY -1
|
|
#define ST7735_BL (0 + 15)
|
|
#define VTFT_CTRL (0 + 13) // Active HIGH, powers the ST7735 display
|
|
#define SPI_FREQUENCY 80000000
|
|
#define SPI_READ_FREQUENCY 16000000
|
|
#define SCREEN_ROTATE
|
|
#define TFT_HEIGHT 160
|
|
#define TFT_WIDTH 80
|
|
#define TFT_OFFSET_X 24
|
|
#define TFT_OFFSET_Y 0
|
|
#define TFT_INVERT false
|
|
#define DISPLAY_FORCE_SMALL_FONTS
|
|
#define FORCE_LOW_RES 1 // 80px-wide panel causes artifacts with full-res UI elements
|
|
|
|
// Pins
|
|
|
|
#define PINS_COUNT (48)
|
|
#define NUM_DIGITAL_PINS (48)
|
|
#define NUM_ANALOG_INPUTS (1)
|
|
#define NUM_ANALOG_OUTPUTS (0)
|
|
|
|
// LEDs
|
|
|
|
#define PIN_LED1 (0 + 16)
|
|
#define LED_BLUE PIN_LED1 // fake for bluefruit library
|
|
#define LED_GREEN PIN_LED1
|
|
#define LED_STATE_ON 0 // State when LED is lit
|
|
|
|
// Buttons
|
|
|
|
#define PIN_BUTTON1 (32 + 10)
|
|
#define PIN_BUTTON2 (0 + 14)
|
|
|
|
// Serial (unused, not populated on PCB)
|
|
|
|
#define PIN_SERIAL2_RX (-1)
|
|
#define PIN_SERIAL2_TX (-1)
|
|
|
|
// I2C (ICM42607P IMU and MMC5983MA compass)
|
|
|
|
#define WIRE_INTERFACES_COUNT 1
|
|
#define PIN_WIRE_SDA (32 + 3)
|
|
#define PIN_WIRE_SCL (0 + 10)
|
|
|
|
#define PIN_SENSOR_EN (32 + 6) // Active LOW - controls IMU and compass VDD
|
|
#define PIN_SENSOR_EN_ACTIVE LOW
|
|
|
|
// ICM42607P interrupt pins - populated on PCB, not yet used in firmware
|
|
// #define ICM_42607P_INT_PIN (32 + 1) // INT1 - P1.01
|
|
// #define ICM_42607P_INT2_PIN (32 + 7) // INT2 - P1.07
|
|
|
|
// LoRa (SX1262)
|
|
|
|
#define USE_SX1262
|
|
#define SX126X_CS (32 + 11) // FIXME - we really should define LORA_CS instead
|
|
#define LORA_CS SX126X_CS
|
|
#define SX126X_DIO1 (0 + 31)
|
|
#define SX126X_BUSY (0 + 29)
|
|
#define SX126X_RESET (0 + 2)
|
|
#define SX126X_DIO2_AS_RF_SWITCH
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
|
|
// SPI
|
|
|
|
#define SPI_INTERFACES_COUNT 2
|
|
|
|
// SPI0 - LoRa
|
|
#define PIN_SPI_MISO (0 + 3)
|
|
#define PIN_SPI_MOSI (32 + 14)
|
|
#define PIN_SPI_SCK (32 + 13)
|
|
|
|
// SPI1 - Display (ST7735, write-only)
|
|
#define PIN_SPI1_MISO ST7735_MISO
|
|
#define PIN_SPI1_MOSI ST7735_SDA
|
|
#define PIN_SPI1_SCK ST7735_SCK
|
|
|
|
// GPS (UC6580)
|
|
|
|
#define GPS_UC6580
|
|
#define GPS_BAUDRATE 115200
|
|
#define PIN_GPS_RESET (0 + 26)
|
|
#define GPS_RESET_MODE LOW
|
|
#define PIN_GPS_EN (0 + 4)
|
|
#define GPS_EN_ACTIVE LOW
|
|
#define PERIPHERAL_WARMUP_MS 1000 // Allow I2C bus to stabilise after sensor power-on
|
|
#define PIN_GPS_PPS (32 + 9) // Pulse per second input from the GPS
|
|
#define GPS_TX_PIN (0 + 7)
|
|
#define GPS_RX_PIN (0 + 8)
|
|
#define GPS_THREAD_INTERVAL 50
|
|
|
|
#define PIN_SERIAL1_RX GPS_RX_PIN
|
|
#define PIN_SERIAL1_TX GPS_TX_PIN
|
|
|
|
// Buzzer
|
|
|
|
#define PIN_BUZZER (0 + 9)
|
|
#define PIN_BUZZER_VOLTAGE_MULTIPLIER_1 (32 + 2)
|
|
#define PIN_BUZZER_VOLTAGE_MULTIPLIER_2 (32 + 5)
|
|
|
|
// Battery / ADC
|
|
|
|
#define ADC_CTRL 11
|
|
#define ADC_CTRL_ENABLED HIGH
|
|
#define BATTERY_PIN 5 // nRF52840 AIN3
|
|
#define ADC_RESOLUTION 14
|
|
|
|
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
|
#define BATTERY_SENSE_RESOLUTION 4096.0
|
|
#undef AREF_VOLTAGE
|
|
#define AREF_VOLTAGE 3.0
|
|
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
|
|
#define ADC_MULTIPLIER (4.916F)
|
|
|
|
// #define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_3 // UNSAFE: causes 2.9 mA deep-sleep leakage (issue #8801)
|
|
|
|
// Power / USB
|
|
|
|
#define NRF_APM // USB VBUS detection via nrfx_power_usbstatus_get() - no dedicated charging IC on this board
|
|
#define HAS_RTC 0 // No external RTC fitted
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|