3 people 0b906b4d15 T-Watch Ultra support (#8171) ...

* feat: T-Watch Ultra support

* fix init touch controller

* add framebuffer

* update to device-ui

* trunk fmt

* update amoled driver reference

* PMU cosmetics

* power off lora

* fix NodeDB defaults

* trySetRTC when fixedPosition

* haptic touch (only BaseUI)

* init lora RF switch

* update LovyanGFX 1.2.19

* earlyInitVariant() adaptations acc. #9438

* update device-ui / touch handling

* Set NFC_CS disabled on boot

* Get t-watch-ultra working better on BaseUI

* Fix compilation

* Fix flash reads on t-watch-ultra

* Get baseui drawing to the screen correctly again on t-watch and add touch IRQ handling

* Add PMU IRQ handling

* Add IMU support

* Change define to avoid collision

* BaseUI changes to support t-watch-s3 rounded screen (#10786)

* BaseUI changes to support t-watch-s3 rounded screen

* Extend margin work to CannedMessages

* Finish merge

* Get audio working on watch-ultra

* trunk fmt

* added custom_meshtastic boilerplate

* T-Echo-Plus: disable BHI260AP while assumingly not implemented

* Drop the duplicate origBold declaration from the merge

* Inset incoming message bubbles on rounded screens

* Fix RTTTL tempo, WiFi screen margins, PMU guard and a duplicate define

* fix compile errror (the 2nd time)

* fix SDcard

* fix/workaround CO5300 pixel flush to SPI

* trunk fmt

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>

2026-08-20 12:28:57 +00:00

..

bpi_picow_esp32_s3.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

canaryone.json

Trunk

2024-03-07 15:51:28 -06:00

CDEBYTE_EoRa-Hub.json

Add EByte EoRa-Hub (#9169)

2026-01-15 06:24:10 -06:00

CDEBYTE_EoRa-S3.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

crowpanel.json

Crowpanel 4.3, 5.0, 7.0 support (#6611)

2025-05-13 14:15:52 +02:00

eink0.1.json

[BOARD]: CanaryOne (#3150)

2024-02-10 17:55:32 -06:00

esp32-s3-pico.json

Update esp32-s3-pico.json (#6284)

2025-03-11 13:11:11 +02:00

esp32-s3-zero.json

add nugget and nibble boards for 38c3 (#5609)

2024-12-21 14:57:01 +01:00

ESP32-S3-WROOM-1-N4.json

Add bluetooth capability marker to some ESP32S3 boards (#4587)

2024-08-30 05:51:46 -05:00

gat562_mesh_trial_tracker.json

add support for GAT562 Mesh Trial Tracker (#6984)

2025-06-13 17:27:48 +10:00

hackaday-communicator.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_mesh_node_t1.json

Add Heltec mesh node t1 (#10416)

2026-05-29 12:47:09 -05:00

heltec_mesh_node_t096.json

add heltec_mesh_node_t096 board. (#9960)

2026-03-22 09:55:09 -05:00

heltec_mesh_node_t114.json

Make PacketHistory logging less chatty (#7272)

2025-07-08 15:12:44 -05:00

heltec_mesh_pocket.json

Trunk fixes for heltec mesh pocket. (#6588)

2025-04-15 16:37:09 -05:00

heltec_mesh_solar.json

Mesh solar integrate (#7764)

2025-08-27 06:02:54 -05:00

heltec_mesh_tower_v2.json

Add Heltec tower v2 board. (#10693)

2026-06-18 07:07:50 -05:00

heltec_v4_r8.json

add heltec-v4-r8 board (#10268)

2026-04-27 09:47:41 -05:00

heltec_v4.json

Change ARDUINO_USB_MODE from 0 to 1 in the board definition. This switches to the ESP32-S3's Hardware CDC and JTAG mode, which properly handles the reset signals for automatic reboot after firmware updates. (#8881)

2025-12-06 18:56:56 -06:00

heltec_vision_master_e213.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_vision_master_e290.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_vision_master_t190.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_wireless_tracker_v2.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

heltec_wireless_tracker.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

icarus.json

Icarus - Custom PCB (#5155)

2024-10-26 19:24:30 -05:00

me25ls01-4y10td.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

mesh-tab.json

More meshtab cherry-pick (#5681)

2024-12-28 08:29:58 -06:00

mesh-tracker-x1.json

Seeed Tracker X1 Support (#10834)

2026-07-02 07:39:52 -05:00

meshlink.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

meshtiny.json

Add Meshtiny device (#7676)

2025-08-20 11:52:10 +08:00

mini-epaper-s3.json

Support mini ePaper S3 Kit (#9335)

2026-02-23 12:08:24 -06:00

minimesh_lite.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

ms24sf1.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

muzi-base.json

Add support for muzi-base (#8753)

2025-11-25 18:28:06 -06:00

my_esp32s3_diy_eink.json

trunk it baby

2023-03-29 13:41:45 +02:00

my-esp32s3-diy-oled.json

trunk it baby

2023-03-29 13:41:45 +02:00

nano-g2-ultra.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

nordic_pca10059.json

Update nordic_pca10059.json

2024-09-19 15:41:59 +08:00

nrf54l15dk.json

feat: add Nordic nRF54L15-DK variant (Zephyr + BLE + LoRa) (#10193)

2026-05-16 06:16:11 -05:00

nrf52840_dk.json

[BOARD]: CanaryOne (#3150)

2024-02-10 17:55:32 -06:00

promicro-nrf52840.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

r1-neo.json

missed t-rexes

2025-10-01 13:32:44 -05:00

seeed_solar_node.json

Update Seeed Solar Node (#6763)

2025-05-14 06:32:24 -05:00

seeed_wio_tracker_L1_Pro_1W.json

feat(variants): add Seeed Wio Tracker L1 Pro 1W (#11542)

2026-08-19 17:05:34 +00:00

seeed_wio_tracker_L1.json

Fix Seeed L1 board to enable consistent PIO flashing (#7211)

2025-07-02 20:58:15 -05:00

seeed_xiao_nrf52840_kit.json

Trunk

2025-06-15 07:40:45 -05:00

seeed-sensecap-indicator.json

reorganize 8MB partition for MUI devices (#7860)

2025-09-08 05:56:47 -05:00

seeed-xiao-s3.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

station-g2.json

Develop to master (#9618)

2026-02-19 07:16:33 -06:00

station-g3.json

Add initial support for Station G3 variant (#10457)

2026-05-13 08:07:24 -05:00

t5-epaper-s3.json

T5-4.7-S3 Epaper Pro support (#6625)

2026-03-25 10:52:18 -05:00

t-beam-1w.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

t-beam-bpf.json

Add T-Beam BPF - 144-148 Mhz LoRa @ ~37 dBm (5 Watts) (#10558)

2026-07-27 13:54:53 +00:00

t-deck-pro.json

T-Deck Pro support (#6936)

2025-07-21 19:33:24 +02:00

t-deck.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

t-echo.json

Added product url (#5594)

2024-12-18 15:46:18 +11:00

t-impulse-plus.json

fix(t-impulse-plus): enable 1200bps touch for nrfutil upload (#11499)

2026-08-14 08:34:57 +00:00

t-watch-s3.json

fix GPS for T-Watch S3 plus (#9312)

2026-01-14 10:01:08 -06:00

t-watch-ultra.json

T-Watch Ultra support (#8171)

2026-08-20 12:28:57 +00:00

tbeam-s3-core.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

ThinkNode-M1.json

Update URL for ThinkNode M1 (#7005)

2025-06-10 13:52:30 +10:00

ThinkNode-M3.json

Thinknode M3 support against master (#8630)

2025-11-24 16:35:54 -06:00

ThinkNode-M4.json

Preliminary Thinknode M4 Support (#8754)

2026-01-14 21:36:53 -06:00

ThinkNode-M6.json

Add Thinknode M6

2025-11-21 10:14:06 +01:00

ThinkNode-M7.json

ThinkNode M7 (#8077)

2026-05-11 11:46:13 -05:00

ThinkNode-M8.json

Add Elecrow ThinkNode M8 board support (thinknode_m8) (#11226)

2026-07-30 15:59:35 +00:00

tlora-t3s3-v1.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

tracker-t1000-e.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

ttgo-tbeam.json

ESP32: Take away "tbeam" boards PSRAM to reclaim iram (#10036)

2026-03-30 13:20:19 -05:00

unphone.json

ESP32: Migrate to Arduino 3.x (pioarduino) (#9122)

2026-05-17 18:53:32 -05:00

wio-sdk-wm1110.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

wio-t1000-s.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

wio-tracker-wm1110.json

Add missing openocd_target to custom nrf52 boards (#9603)

2026-02-11 06:29:55 -06:00

wiphone.json

Wiphone (#3793)

2024-05-06 06:48:57 -05:00

wiscore_rak3172.json

Make ExternalNotification show up in excluded_modules, more STM32 modules (#7797)

2025-09-02 07:09:15 -05:00

wiscore_rak3312.json

feat: add support for RAK3312 (New RAKwireless wiscore ESP32-S3 + SX1262) (#7115)

2025-07-02 06:03:42 -05:00

wiscore_rak4631.json

Revert "Sync Wio lr1110 refresh with master (#4288)"

2024-07-22 15:30:36 +02:00

wiscore_rak11200.json

add psram flag on RAK11200 board definition (#3887)

2024-05-14 13:48:26 +02:00

xiao_ble_sense.json

[BOARD]: CanaryOne (#3150)

2024-02-10 17:55:32 -06:00