0501e177e9
* Tmini Eink fix * tuning * better refresh * Fix to lora pins to be like the original. * Update pins_arduino.h * removed dead flags from previous tests * Update src/graphics/niche/Drivers/EInk/GDEW0102T4.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
58 lines
1.4 KiB
C
58 lines
1.4 KiB
C
#pragma once
|
|
|
|
#define GPS_DEFAULT_NOT_PRESENT 1
|
|
|
|
// SD card (TF)
|
|
#define HAS_SDCARD
|
|
#define SDCARD_USE_SPI1
|
|
#define SDCARD_CS 40
|
|
#define SD_SPI_FREQUENCY 25000000U
|
|
|
|
// Built-in RTC (I2C)
|
|
#define PCF8563_RTC 0x51
|
|
#define HAS_RTC 1
|
|
#define I2C_SDA SDA
|
|
#define I2C_SCL SCL
|
|
|
|
// Battery voltage monitoring
|
|
#define BATTERY_PIN 2 // A battery voltage measurement pin, voltage divider connected here to
|
|
// measure battery voltage ratio of voltage divider = 2.0 (assumption)
|
|
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
|
#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
|
|
|
|
// Display (E-Ink)
|
|
#define PIN_EINK_EN 42
|
|
#define PIN_EINK_CS 13
|
|
#define PIN_EINK_BUSY 10
|
|
#define PIN_EINK_DC 12
|
|
#define PIN_EINK_RES 11
|
|
#define PIN_EINK_SCLK 14
|
|
#define PIN_EINK_MOSI 15
|
|
#define DISPLAY_FORCE_SMALL_FONTS
|
|
|
|
// Two-Way Rocker input (left/right + boot as press)
|
|
#define INPUTDRIVER_TWO_WAY_ROCKER
|
|
#define INPUTDRIVER_ENCODER_TYPE 2
|
|
#define INPUTDRIVER_TWO_WAY_ROCKER_RIGHT 3
|
|
#define INPUTDRIVER_TWO_WAY_ROCKER_LEFT 4
|
|
#define INPUTDRIVER_TWO_WAY_ROCKER_BTN 0
|
|
#define UPDOWN_LONG_PRESS_REPEAT_INTERVAL 150
|
|
|
|
// LoRa (SX1262)
|
|
#define USE_SX1262
|
|
|
|
#define LORA_DIO1 5
|
|
#define LORA_SCK 8
|
|
#define LORA_MISO 6
|
|
#define LORA_MOSI 17
|
|
#define LORA_CS 7 // CS not connected; IO7 is free
|
|
#define LORA_RESET 21
|
|
|
|
#ifdef USE_SX1262
|
|
#define SX126X_CS LORA_CS
|
|
#define SX126X_DIO1 LORA_DIO1
|
|
#define SX126X_BUSY 16
|
|
#define SX126X_RESET LORA_RESET
|
|
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
|
#endif
|